AOYAMA Eiichi
Faculty of Science and Engineering Department of Mechanical Engineering and Science
Professor
Last Updated :2023/01/30

Researcher Profile and Settings

Research Interests

  • 歯車
  • 切削加工、研削加工、研磨加工

Research Areas

  • Manufacturing technology (mechanical, electrical/electronic, chemical engineering) / Machine elements and tribology
  • Manufacturing technology (mechanical, electrical/electronic, chemical engineering) / Design engineering
  • Manufacturing technology (mechanical, electrical/electronic, chemical engineering) / Manufacturing and production engineering

Education

  • Doshisha University, 工学研究科, 機械工学専攻, 1976/04 - 1978/03
  • Doshisha University, Graduate School, Division of Engineering, 機械工学科, 1972/04 - 1976/03

Degree

  • Doctor of Engineering, Doshisha University
  • Master of Engineering, Doshisha University

Association Memberships

  • 砥粒加工学会
  • 精密工学会
  • 日本臨床バイオメカニクス学会
  • 日本機械学会
  • 日本材料学会

Committee Memberships

  • 関西支部商議員・幹事, 2006 - Today, 精密工学会, Society, 精密工学会
  • 関西支部商議員.第3専門部会部会長, 2016 - , 日本機械学会
  • 機械分科会会長, 2013 - 2014, 関西工学教育協会
  • 理事・関西地区部会部会長, 2011 - 2012, 砥粒加工学会, Society
  • 生産加工・工作機械部門運営委員会委員・幹事, 2004 - 2005, 日本機械学会
  • 機素潤滑設計部門機械要素1技術企画委員会委員, 2001 - , 日本機械学会, Society, 日本機械学会

Published Papers

  • Improved Synchronous Motion of Linear and Rotary Axes While Avoiding Torque Saturation Under a Constant Feed Speed Vector at the Endmilling Point – Investigation of Motion Error Under Numerical Control Commanded Motion –
    Takamaru Suzuki; Kazuki Yoshikawa; Toshiki Hirogaki; Eiichi Aoyama; Takakazu Ikegami
    International Journal of Automation Technology, Fuji Technology Press Ltd., 16(3) 356 - 366, 05 May 2022, Scientific journal
  • Investigation of Influence of Pilot Hole on Thread Mill Processes Based on Monitoring Results with a Wireless Monitoring Holder System
    Shota MATSUI; Nobutoshi OZAKI; Toshiki HIROGAKI; Eiichi AOYAMA
    Journal of the Japan Society for Precision Engineering, Japan Society for Precision Engineering, 87(8) 691 - 697, 05 Aug. 2021, Scientific journal
  • Paper: Monitoring of Vibrations in Free-Form Surface Processing Using Ball Nose End Mill Tools with Wireless Tool Holder Systems
    Takamasa Yamamoto; Ryo Matsuda; Masatoshi Shindou; Toshiki Hirogaki; Eiichi Aoyama
    INTERNATIONAL JOURNAL OF AUTOMATION TECHNOLOGY, FUJI TECHNOLOGY PRESS LTD, 15(3) 335 - 342, May 2021, Scientific journal
  • Investigation of air filter properties of nanofiber non-woven fabric manufactured by a modified melt-blowing method along with flash spinning method
    Wei Wu; Hiroyoshi Sota; Toshiki Hirogaki; Eiichi Aoyama
    PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, ELSEVIER SCIENCE INC, 68 187 - 196, Mar. 2021, Scientific journal
  • Effects of Shaft Offset on Vibration and Tooth Contact Area Based on High-Speed Thermography Monitoring under Hypoid Gear Meshing Conditions
    Hiroki SAKUDA; Ren YAMASHITA; Koki WATANABE; Shota MATSUI; Toshiki HIROGAKI; Eiichi AOYAMA
    Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21, Japan Society of Mechanical Engineers, 2021.10 002 - 012, 2021, Scientific journal
  • Reversing Behavior of Planetary Gear Train Influenced by Support Stiffness of Driving Shaft.
    Seiya Hamada; Kazutoshi Otokodani; Masao Nakagawa; Toshiki Hirogaki; Eiichi Aoyama
    International Journal of Automation Technology, 15(6) 813 - 823, 2021, Scientific journal
  • Cutting state estimation via chatter mark on end milled surface and analysis of its formation mechanism using voxel model simulation
    Nobutoshi Ozaki; Shota Matsui; Toshiki Hirogaki; Eiichi Aoyama
    Proceedings of the ASME 2021 16th International Manufacturing Science and Engineering Conference, MSEC 2021, 1, 2021, International conference proceedings
  • Positioning Error Calibration of Industrial Robots Based on Random Forest.
    Daiki Kato; Kenya Yoshitsugu; Naoki Maeda; Toshiki Hirogaki; Eiichi Aoyama; Kenichi Takahashi
    International Journal of Automation Technology, 15(5) 581 - 589, 2021, Scientific journal
  • Verification of pattern formation mechanism using voxel model and estimation accuracy for inverse analysis of vibration phenomenon using two-dimensional discrete Fourier transform of end mill chatter mark
    Nobutoshi OZAKI; Haruki MINETAKA; Shota MATSUI; Toshiki HIROGAKI; Eiichi AOYAMA
    Transactions of the JSME (in Japanese), Japan Society of Mechanical Engineers, 87(899) 21 - 00095, 2021, Scientific journal
  • Predicting Positioning Error and Finding Features for Large Industrial Robots Based on Deep Learning.
    Daiki Kato; Kenya Yoshitsugu; Toshiki Hirogaki; Eiichi Aoyama; Kenichi Takahashi
    International Journal of Automation Technology, FUJI TECHNOLOGY PRESS LTD, 15(2) 206 - 214, 2021, Scientific journal
  • Development of a Forward-Reverse Rotating cBN Electroplated End Mill Type Tool for Cutting and Grinding CFRP.
    Fumiya Muto; Toshiki Hirogaki; Eiichi Aoyama; Tatsuya Furuki; Kiyofumi Inaba; Kazuna Fujiwara
    International Journal of Automation Technology, FUJI TECHNOLOGY PRESS LTD, 15(1) 41 - 48, 2021, Scientific journal
  • Investigation of Optimum Grinding Condition Using cBN Electroplated End-Mill for CFRP Machining.
    Shinnosuke Yamashita; Tatsuya Furuki; Hiroyuki Kousaka; Toshiki Hirogaki; Eiichi Aoyama; Kiyofumi Inaba; Kazuna Fujiwara
    International Journal of Automation Technology, FUJI TECHNOLOGY PRESS LTD, 15(1) 4 - 16, 2021, Scientific journal
  • Temperature monitoring with a high-speed camera based on two color method and its CFD analysis in Cu direct laser drilling of printed circuit board
    HIROGAKI Toshiki; AOYAMA Eiichi; YAMAGUCHI Ryouta; NAKAGAWA Wataru
    Transactions of the JSME (in Japanese), The Japan Society of Mechanical Engineers, 87(896) 20 - 00413-20-00413, 2021
  • Development of automatic work-piece ejector for two opposing spindle lathes based on Quality engineering
    山口 陽平; 石黒 春樹; 廣垣 俊樹; 青山 栄一
    Abrasive technology : 砥粒加工学会誌 : journal of the Japan Society for Abrasive Technology, 砥粒加工学会, 64(11) 580 - 584, Nov. 2020
  • Machine-learning-based approach to improve the positioning accuracy of large industrial robots
    K. Yoshitsugu; D. Kato; T. Hirogaki; E. Aoyama; K. Takahashi
    International Conference on Control, Automation and Systems, 2020-October 323 - 328, 13 Oct. 2020, International conference proceedings
  • Investigation of novel teaching method for skillful operation of working plate with an industrial dual arm robot
    T. Mase; R. Kitahata; T. Hirogaki; E. Aoyama
    International Conference on Control, Automation and Systems, 2020-October 1099 - 1104, 13 Oct. 2020, International conference proceedings
  • Determining arrangement and cooperative operating control of two industrial robots based on torque margin method
    K. Omoto; T. Hirogaki; E. Aoyama
    International Conference on Control, Automation and Systems, 2020-October 320 - 322, 13 Oct. 2020, International conference proceedings
  • DEVELOPMENT OF THE CBN ELECTROPLATED END-MILL FOR HIGH PRECISION MACHINING OF CFRP
    Shinnosuke Yamashita; Tatsuya Furuki; Hiroyuki Kousaka; Toshiki Hirogaki; Eiichi Aoyama; Kiyofumi Inada; Kazuna Fujiwara
    Proceedings of JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing, LEMP2020, LEMP2020(8604) 1 - 6, Jun. 2020
  • INVESTIGATION OF CUTTING FORCE IN SCREW CUTTING BY THREE AXIS CONTROLLING HELICAL INTERPOLATE WITH A WIRELESS COMMUNICATION TOOL HOLDER SYSTEM
    Shota Matsui; Nobutoshi Ozaki; Toshiki Hirogaki; Eiichi Aoyama; Ryo Matsuda
    Proceedings of JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing, LEMP2020, LEMP2020(8540) 1 - 7, Jun. 2020
  • Development of abrasive super finishing method with a five-axis closed-link compact robot and fine diamond stone
    Ryotaro Yonemoto; Toshiki Hirogaki; Eiichi Aoyama
    2020 20TH INTERNATIONAL CONFERENCE ON CONTROL, AUTOMATION AND SYSTEMS (ICCAS), IEEE, 88 - 93, 2020, International conference proceedings
  • Improved accuracy of a machining tool with a constant cutting speed vector and outside approach path
    Takamaru Suzuki; Shoya Iwama; Toshiki Hirogaki; Eiichi Aoyama; Takakazu Ikegami; Takayuki Akai
    2020 International Symposium on Flexible Automation, ISFA 2020, 2020, International conference proceedings
  • Tooth meshing estimation based on monitoring rotational vibration and infrared thermography image of hypoid gear
    Ren Yamashita; Koki Mukaiyama; Hiroki Sakuda; Shota Matsui; Toshiki Hirogaki; Eiichi Aoyama
    Proceedings of the ASME Design Engineering Technical Conference, 7, 2020, International conference proceedings
  • Basic performance of natural fiber bevel gears made from only bamboo fibers extracted with a machining center
    Tetsuya Kawabata; Toshiki Hirogaki; Eiichi Aoyama; Masao Nakagawa; Hiromichi Nobe
    Proceedings of the ASME Design Engineering Technical Conference, 6, 2020, International conference proceedings
  • In-situ modification of position and posture motion of AN industrial robot to recreate space technology in a pipe joint manufacturing system with the laser trucker sensor
    Tetsuji Yamauchi; Toshiki Hirogaki; Eichi Aoyama; Kenichi Takahashi
    International Journal of Mechanical Engineering and Robotics Research, 9(3) 378 - 386, 2020, Scientific journal
  • Data mining from endmill tool catalog information based on the use of a machine learning method
    Akihito Asakura; Toshiki Hirogaki; Eiichi Aoyama; Hiroyuki Kodama
    Proceedings of the ASME Design Engineering Technical Conference, 9, 2020, International conference proceedings
  • Driving performance of natural fiber gears made only from bamboo fibers extracted with a machining center
    Tetsuya Kawabata; Toshiki Hirogaki; Eiichi Aoyama; Hiromichi Nobe
    International Journal of Automation Technology, FUJI TECHNOLOGY PRESS LTD, 14(2) 280 - 293, 2020, Scientific journal
  • Smart monitoring of helical thread mill process with a wireless tool holder and CNC information
    Shota Matsui; Nobutoshi Ozaki; Toshiki Hirogaki; Eiichi Aoyama; Takamasa Yamamoto; Masatoshi Shindo
    Advances in Materials and Processing Technologies, TAYLOR & FRANCIS LTD, 1 - 13, 2020, Scientific journal
  • Analysis of drilling conditions by a catalog mining method based on Fuzzy c-means algorithm
    Claire Amelie Janot; Hirokazu Higuchi; Kotaro Yamada; Akihito Asakura; Toshiki Hirogaki; Eiichi Aoyama
    Journal of Advanced Mechanical Design, Systems and Manufacturing, JAPAN SOC MECHANICAL ENGINEERS, 14(6) 1 - 19, 2020, Scientific journal
  • Investigation of production of nanofiber nonwoven fabric and its thermal properties
    Wei Wu; Kenichi Urabe; Toshiki Hirogaki; Eiichi Aoyama; Hiroyoshi Sota
    International Journal of Automation Technology, FUJI TECHNOLOGY PRESS LTD, 14(2) 264 - 273, 2020, Scientific journal
  • Improvement of machined accuracy under constant feed speed at milling point with a five axis controlled machining center considering approach path
    SUZUKI Takamaru; IWAMA Shoya; HIROGAKI Toshiki; AOYAMA Eiichi
    Transactions of the JSME (in Japanese), The Japan Society of Mechanical Engineers, 86(889) 20 - 00175-20-00175, 2020
  • Investigation of spindle state diagnosis and processing phenomenon monitoring with a wireless multifunctional tool holder system
    YAMAMOTO Takamasa; MATSUDA Ryou; SHINDOU Masatoshi; HIROGAKI Toshiki; AOYAMA Eiichi
    Journal of the Japan Society for Abrasive Technology, The Japan Society for Abrasive Technology, 64(2) 91 - 97, 2020
  • Influence of grooved plate cross-sectional shape on bending phenomena in laser-quenching forming process
    Yuki Manabe; Hiromichi Nishida; Toshiki Hirogaki; Eiichi Aoyama
    International Journal of Automation Technology, FUJI TECHNOLOGY PRESS LTD, 14(4) 592 - 600, 2020, Scientific journal
  • Investigation of internal thread cutting phenomena in three axes by controlling helical interpolate motion considering tool position information from servo-drive
    Shota Matsui; Nobutoshi Ozaki; Toshiki Hirogaki; Eiichi Aoyama; Takamasa Yamamoto
    International Journal of Automation Technology, FUJI TECHNOLOGY PRESS LTD, 14(3) 467 - 474, 2020, Scientific journal
  • Consideration of machining phenomena based on tool rotation coordinate system monitoring in thread cutting by helical interpolation thread mill
    MATSUI Shota; OZAKI Nobutoshi; HIROGAKI Toshiki; AOYAMA Eiichi; Matsuda Ryo
    Journal of the Japan Society for Abrasive Technology, The Japan Society for Abrasive Technology, 64(5) 260 - 266, 2020, Scientific journal
  • Investigation of sound absorption characteristics of polypropylene nanofiber nonwoven fabric focusing on flow resistance in biot acoustic parameters
    Wei Wu; Kenichi Urabe; Toshiki Htrogaki; Eiichi Aoyama; Hiroyoshi Sota
    Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, The Japan Society for Precision Engineering, 86(5) 367 - 374, 2020
  • Surface finishing by laser quenching forming and nanofiber polishing
    Yuki Manabe; Hiromichi Nishida; Wei Wu; Toshiki Hirogaki; Eiichi Aoyama
    Advances in Materials and Processing Technologies, TAYLOR & FRANCIS LTD, 1 - 19, 2020, Scientific journal
  • Investigation of transient response motion of differential planetary gear train during reverse rotation and starting by using high-speed camera monitoring
    Tomoki Fukuda; Masao Nakagawa; Toshiki Hirogaki; Eiichi Aoyama
    Forschung im Ingenieurwesen/Engineering Research, SPRINGER HEIDELBERG, 83(3) 509 - 520, 01 Sep. 2019, Scientific journal
  • Investigation of meshing phenomenon of hypoid gears with different offsets via high response infrared video thermography
    Koki Mukaiyama; Susumu Arao; Shota Matsui; Masao Nakagawa; Toshiki Hirogaki; Eiichi Aoyama
    Forschung im Ingenieurwesen/Engineering Research, SPRINGER HEIDELBERG, 83(3) 445 - 459, 01 Sep. 2019, Scientific journal
  • Method of improving synchronisation of motion accuracy of rotary axis and linear axes under a constant feed-speed vector of end-milling point
    Takamaru Suzuki; Toshiki Hirogaki; Eiichi Aoyama; Takayuki Akai; Takakazu Ikegami
    Advances in Materials and Processing Technologies, TAYLOR & FRANCIS LTD, 5(3) 497 - 511, 03 Jul. 2019, Scientific journal
  • Development of Wireless Communication Tool Holder for Smart Factory in Next Generation and Its Application of Self-Monitoring of Spindle Equipped with Machine Tools
    Takamasa Yamamoto; Ryo Matsuda; Masatoshi Shindou; Toshiki Hirogaki; Eiichi Aoyama
    同志社大学ハリス理化学研究報告 = The Harris science review of Doshisha University, Harris Science Research Institute of Doshisha University, 60(2) 87 - 93, Jul. 2019
  • Investigation of oil adsorption performance of polypropylene nanofiber nonwoven fabric
    Wei Wu; Toshiki Hirogaki; Eiichi Aoyama; Morihiko Ikegaya; Hiroyoshi Sota
    Journal of Engineering Materials and Technology, Transactions of the ASME, ASME, 141(2), Apr. 2019, Scientific journal
  • A Monitoring Technology of Gear Meshing based on Combination of Continuous Shots with a Thermography and Analysis of Tooth Surface Temperature by Heat Circuit Network Model
    廣垣 俊樹; 青山 栄一
    自動車技術 = Journal of Society of Automotive Engineers of Japan, 自動車技術会, 73(4) 65 - 70, Apr. 2019
  • Investigation of Dynamic Characteristic of Instantaneous Center of Rotation Planet Gear based on the Sun Gear Speed Contour Map in Continuously Varying Transmission under Three-axis Driving of Planetary Gear Train
    中川 正夫; 廣垣 俊樹; 青山 栄一
    自動車技術 = Journal of Society of Automotive Engineers of Japan, 自動車技術会, 73(4) 77 - 83, Apr. 2019
  • Mirror-surface finishing by integrating magnetic-polishing technology with a compact machine tool
    Yuki Manabe; Hiroki Murakami; Toshiki Hirogaki; Eiichi Aoyama; Tatsuya Furuki
    International Journal of Automation Technology, FUJI TECHNOLOGY PRESS LTD, 13(2) 207 - 220, Mar. 2019, Scientific journal
  • Investigation on optimum abrasive size of cBN electroplated end-mill for CFRP machining
    Tatsuya Furuki; Shinnosuke Yamashita; Toshiki Hirogaki; Eiichi Aoyama; Ruriko Kometani; Kiyofumi Inaba; Kazuna Fujiwara
    European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 19th International Conference and Exhibition, EUSPEN 2019, 388 - 391, 2019, International conference proceedings
  • Investigation on influence of tooth precision on meshing noise of planetary gear train
    Seiya Hamada; Masao Nakagawa; Tomoki Fukuda; Toshiki Hirogaki; Eiichi Aoyama
    Proceedings of the ASME Design Engineering Technical Conference, AMER SOC MECHANICAL ENGINEERS, 10, 2019, International conference proceedings
  • Playing a musical saw with a humanoid robot: Investigation for industrial automation
    Akira Mishima; Yusuke Fuke; Atsuyuki Miura; Toshiki Hirogaki; Eiichi Aoyama
    Proceedings of the ASME Design Engineering Technical Conference, AMER SOC MECHANICAL ENGINEERS, 5A-2019, 2019, International conference proceedings
  • A proposed hybrid laser quenching process, and investigation of its three-dimensional forming error
    Hiromichi Nishida; Yuki Manabe; Toshiki Hirogaki; Eiichi Aoyama
    Proceedings of the ASME Design Engineering Technical Conference, AMER SOC MECHANICAL ENGINEERS, 4, 2019, International conference proceedings
  • Novel state estimation method of surface chatter pattern via image processing after end milling
    Nobutoshi Ozaki; Shota Matsui; Toshiki Hirogaki; Eiichi Aoyama
    Proceedings of the ASME Design Engineering Technical Conference, AMER SOC MECHANICAL ENGINEERS, 4, 2019, International conference proceedings
  • State estimation based on image processing of chatter mark on end-milled surface by two-dimensional discrete Fourier transform
    OZAKI Nobutoshi; MATSUI Shota; HIROGAKI Toshiki; AOYAMA Eiichi
    Transactions of the JSME (in Japanese), The Japan Society of Mechanical Engineers, 85(879) 19 - 00292-19-00292, 2019
  • Catalog mining using MIC (Maximal Information Coefficient) of radius end mill tool
    Taishi Sakuma; Toshiki Hirogaki; Eiichi Aoyama; Kengo Kubo; Hiroyuki Kodama
    Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, The Japan Society for Precision Engineering, 85(3) 260 - 266, 2019, Scientific journal
  • Investigation of transient response on starting up of differential planetary gear train with high-speed monitoring
    Masao Nakagawa; Tomoki Fukuda; Toshiki Hirogaki; Eiichi Aoyama
    Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, The Japan Society for Precision Engineering, 85(4) 340 - 346, 2019, Scientific journal
  • Study on monitoring tool temperature and vibration in drilling and countersinking processes with a multi-functional wireless communication tool holder system
    MATSUDA Ryo; SHINDOU Masatoshi; HIROGAKI Toshiki; AOYAMA Eiichi
    Transactions of the JSME (in Japanese), The Japan Society of Mechanical Engineers, 85(872) 18 - 00176-18-00176, 2019
  • Consideration of optimizing rib shape for small size and high strength spiral bevel gear fabricated by five axis controlled machining center
    TOYOTA Shinya; SAITO Masahiro; SHIBATA Takashi; HIROGAKI Toshiki; AOYAMA Eiichi
    Transactions of the JSME (in Japanese), The Japan Society of Mechanical Engineers, 85(873) 18 - 00472-18-00472, 2019
  • Estimation of monitoring image in laser blind via-hole drilling process of printed wiring boards with a high speed video camera and temperature visualization from obtained image by two-color method
    HIROGAKI Toshiki; AOYAMA Eiichi; KANKI Kouji; YAMAGUCHI Ryouta
    Transactions of the JSME (in Japanese), The Japan Society of Mechanical Engineers, 85(874) 19 - 00009-19-00009, 2019
  • Monitoring and analyzing of endmill processing with a wireless multifunctional tool holder system and servo internal information
    MATSUDA Ryo; SHINDOU Masatoshi; HIROGAKI Toshiki; AOYAMA Eiichi
    Journal of the Japan Society for Abrasive Technology, The Japan Society for Abrasive Technology, 63(1) 24 - 30, 2019
  • Development of in situ heat treatment method using a laser heat source with a turning center
    SHINKAI Yohei; KONDO Masaki; HIROGAKI Toshiki; AOYAMA Eiichi
    Journal of the Japan Society for Abrasive Technology, The Japan Society for Abrasive Technology, 63(2) 87 - 92, 2019
  • Fundamental study on micro drilling of CFRP plate
    OGAWA Keiji; IWAMOTO Shiyu; HIROGAKI Toshiki; AOYAMA Eiichi
    Journal of the Japan Society for Abrasive Technology, The Japan Society for Abrasive Technology, 63(3) 134 - 140, 2019
  • Improved method for synchronizing motion accuracy of linear and rotary axes under constant feed speed vector at end milling point – investigation of motion error under NC-commanded motion
    Takamaru Suzuki; Kazuki Yoshikawa; Toshiki Hirogaki; Eiichi Aoyama; Takakazu Ikegami
    International Journal of Automation Technology, FUJI TECHNOLOGY PRESS LTD, 13(5) 679 - 690, 2019, Scientific journal
  • Proposal of data mining process for tool catalog data introducing machine learning
    SAKUMA Taishi; ASAKURA Akihito; YAMADA Kotaro; HIROGAKI Toshiki; AOYAMA Eiichi; KODAMA Hiroyuki
    Transactions of the JSME (in Japanese), The Japan Society of Mechanical Engineers, 85(877) 19 - 00215-19-00215, 2019
  • Study on production of flocculating nanofiber and its application for ultra-precision abrasive machining
    Wei Wu; Lei Ma; Eiichi Aoyama; Toshiki Hirogaki; Morihiko Ikegaya; Takatsugu Echizenya; Hiroyoshi Sota
    Advances in Materials and Processing Technologies, TAYLOR & FRANCIS LTD, 4(3) 416 - 430, 03 Jul. 2018, Scientific journal
  • Influence of angle between fibre and machining direction for CFRP machining using cBN electroplated end-mill
    Ruriko Kometani; Toshiki Hirogaki; Eiichi Aoyama; Tatsuya Furuki; Kiyofumi Inaba; Kazuna Fujiwara
    ISAAT 2018 - 21st International Symposium on Advances in Abrasive Technology, 2018, International conference proceedings
  • Investigation of deformation principle during hybrid process of laser quenching and forming based on in-situ deformation monitor
    Yuki Manabe; Hiromichi Nishida; Tomonao Hirota; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa
    ISAAT 2018 - 21st International Symposium on Advances in Abrasive Technology, 2018, International conference proceedings
  • Smart monitor of tool temperature and vibration in drilling and countersinking processes with a multifunctional wireless communication tool holder system
    Ryo Matsuda; Masatoshi Shindou; Toshiki Hirogaki; Eiichi Aoyama
    ISAAT 2018 - 21st International Symposium on Advances in Abrasive Technology, 2018, International conference proceedings
  • Development of nanofiber abrasive buffing pad produced with modified melt blowing method
    Wei Wu; Eiichi Aoyama; Toshiki Hirogaki; Kenichi Urabe; Hiroyoshi Sota
    ISAAT 2018 - 21st International Symposium on Advances in Abrasive Technology, 9(1) 31 - 48, 2018, International conference proceedings
  • Investigation of planet gear motion in a planetary gear train with direct high speed monitoring
    Tomoki Fukuda; Masao Nakagawa; Syota Matsui; Toshiki Hirogaki; Eiichi Aoyama
    Proceedings of the ASME Design Engineering Technical Conference, AMER SOC MECHANICAL ENGINEERS, 8, 2018, International conference proceedings
  • Investigation of impact hammering task of musical saw with a humanoid robot for industrial automation
    Yusuke Fuke; Toshiki Hirogaki; Eiichi Aoyama; Akira Mishima
    Proceedings of the ASME Design Engineering Technical Conference, AMER SOC MECHANICAL ENGINEERS, 5B-2018, 2018, International conference proceedings
  • Driving performance of natural fiber gears made from only bamboo fibers extracted with a machining center
    Takayuki Yanagawa; Toshiki Hirogaki; Eiichi Aoyama; Syota Matsui; Hiromichi Nobe
    Proceedings of the ASME Design Engineering Technical Conference, AMER SOC MECHANICAL ENGINEERS, 8(2) 280 - 293, 2018, International conference proceedings
  • Investigation of reducing noise and wide geared for a planetary gear train using universal joint (basic investigation of novel component and its evaluation under driving tests
    Masao Nakagawa; Dai Nishida; Toshiki Hirogaki; Eiichi Aoyama
    Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, The Japan Society for Precision Engineering, 84(1) 89 - 96, 2018, Scientific journal
  • Designing on Original Three-axis Driving Planetary Gear Train Test Stand and Its Estimation Based on Trials
    NAKAGAWA Masao; NISHIDA Dai; HIROGAKI Toshiki; AOYAMA Eiichi
    JOURNAL OF JAPAN SOCIETY FOR DESIGN ENGINEERING, Japan Society for Design Engineering, 53(2) 161 - 176, 2018
  • Development of pure bamboo fiber gear made of natural fiber material
    Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa
    Toraibarojisuto/Journal of Japanese Society of Tribologists, Japanese Society of Tribologists, 63(4) 253 - 259, 2018, Scientific journal
  • Study on cutting trace shape control of machined surface by radius end mill with five-axis controlled machining center
    HIROGAKI Toshiki; AOYAMA Eiichi; NAKAMURA Seigo; UENOYAMA Masahiro
    Transactions of the JSME (in Japanese), The Japan Society of Mechanical Engineers, 84(860) 17 - 00508-17-00508, 2018
  • Investigation of tooth precision on meshing noise of planetary gear train - Combinations of different tooth precisions and sound intensity
    Masao Nakagawa; Dai Nishida; Tomoki Fukuda; Syota Matsui; Toshiki Hirogaki; Eiichi Aoyama
    Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, The Japan Society for Precision Engineering, 84(8) 724 - 730, 2018, Scientific journal
  • Investigation of 2K-HV Planetary Gear Train Equipped with Bevel Gears:(Propose of Criteria and Proper Conditions based on Variable Speed Driving Tests)
    NAKAGAWA Masao; NISHIDA Dai; HIROGAKI Toshiki; AOYAMA Eiichi
    JOURNAL OF JAPAN SOCIETY FOR DESIGN ENGINEERING, Japan Society for Design Engineering, 53(11) 839 - 854, 2018
  • Investigation of deformation in laser quenching forming for thin steel plate based on process monitoring
    MANABE Yuki; NISHIDA Hiromichi; HIROGAKI Toshiki; AOYAMA Eiichi; OGAWA Keiji
    Journal of the Japan Society for Abrasive Technology, The Japan Society for Abrasive Technology, 62(11) 571 - 577, 2018
  • Study of screw cutting based on numerical controlled helical interpolation motion
    MATSUI Shota; OZAKI Nobutoshi; HIROGAKI Toshiki; AOYAMA Eiichi; SINDOU Masatoshi
    Journal of the Japan Society for Abrasive Technology, The Japan Society for Abrasive Technology, 62(12) 632 - 637, 2018
  • Route estimation by network voronoi diagram in taxi-type AGV control
    Kensuke Kobayashi; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa; Toya Takahashi
    Proceedings of 2018 ISFA - 2018 International Symposium on Flexible Automation, The Institute of Systems, Control and Information Engineers, 2018(0) 165 - 170, 2018, International conference proceedings
  • Investigation of feed driving motion for 5-axis controlled machine tools with an automatic idling reduction system
    Tokiya Ozaki; Toshiki Hirogaki; Eiichi Aoyama
    Proceedings of 2018 ISFA - 2018 International Symposium on Flexible Automation, The Institute of Systems, Control and Information Engineers, 2018(0) 236 - 241, 2018, International conference proceedings
  • Influence of the number of planet gears on planetary meshing noise
    Deepak Sah; Masao Nakagawa; Dai Nishida; Toshiki Hirogaki; Eiichi Aoyama
    Proceedings of the 9th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2017, 13 Nov. 2017, International conference proceedings
  • Estimation of power consumption of compact five-axis-controlled machine tools with strain wave gear rotary axes based on servo interior information
    Takumi Fujimura; Toshiki Hirogaki; Eiichi Aoyama
    Proceedings of the 9th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2017, 13 Nov. 2017, International conference proceedings
  • Laser quenching and forming method for thin steel plate under preheating conditions
    Yuki Manabe; Tomonao Hirota; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa
    Proceedings of the 9th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2017, The Japan Society for Abrasive Technology, 62(1) 26 - 32, 13 Nov. 2017, International conference proceedings
  • Fabrication of Magic-Mirror with Cutting and Magnetic Polishing on a 5 Axis Machining Center
    Ma Lei; Ling Nan; Hirogaki Toshiki; Aoyama Eiichi
    同志社大学ハリス理化学研究報告 = The Harris science review of Doshisha University, Alternative:Harris Science Research Institute of Doshisha University, 58(3) 149 - 156, Oct. 2017
  • Development of In-Situ Heat Treatment Method by Laser Heat Source with a Turning Center
    Shinkai Yohei; Kondo Masaki; Hirogaki Toshiki; Aoyama Eiichi
    同志社大学ハリス理化学研究報告 = The Harris science review of Doshisha University, Alternative:Harris Science Research Institute of Doshisha University, 58(3) 135 - 140, Oct. 2017
  • Investigation of Screw Cutting by Numerical Controlled Helical Interpolation Motion with a Machining Center
    Matsui Shota; Aotani Kaito; Hirogaki Toshiki; Aoyama Eiichi
    同志社大学ハリス理化学研究報告 = The Harris science review of Doshisha University, Alternative:Harris Science Research Institute of Doshisha University, 58(3) 111 - 117, Oct. 2017
  • Monitor of end-mill process with a wireless communication holder system
    廣垣 俊樹; 青山 栄一; 新堂 正俊; 松田 亮
    Abrasive technology : 砥粒加工学会誌 : journal of the Japan Society for Abrasive Technology, 砥粒加工学会, 61(2) 75 - 78, Feb. 2017
  • Investigation of impact task performed by humanoid robot using input shaping control method
    Asuka Kobayashi; Hironori Suzuki; Toshiki Hirogaki; Eiichi Aoyama
    2016 14th International Conference on Control, Automation, Robotics and Vision, ICARCV 2016, IEEE, 1 - 6, 31 Jan. 2017, International conference proceedings
  • Investigation of Design Method of Synchronous Motor for Machine Tools Based on Quality Engineering
    Ikegami Takakazu; Hirogaki Toshiki; Aoyama Eiichi
    同志社大学ハリス理化学研究報告 = The Harris science review of Doshisha University, Alternative:Harris Science Research Institute of Doshisha University, 57(4) 225 - 230, Jan. 2017
  • INVESTIGATION OF A NOVEL THREE-AXIS DRIVE DESIGN FOR A PLANETARY GEAR TRAIN THAT USES UNIVERSAL JOINTS
    NISHIDA Dai; NAKAGAWA Masao; SAH Deepak; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of the JSME international conference on motion and power transmissions, The Japan Society of Mechanical Engineers, 2017 4 - 3, 2017
  • INVESTIGATION OF A NOVEL THREE-AXIS DRIVE DESIGN FOR A PLANETARY GEAR TRAIN THAT USES UNIVERSAL JOINTS
    NISHIDA Dai; NAKAGAWA Masao; SAH Deepak; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of the JSME international conference on motion and power transmissions, The Japan Society of Mechanical Engineers, 2017 4 - 4, 2017
  • MONITORING OF HYPOID GEAR MESHING BASED ON A THERMAL NETWORK MODEL WITH HIGH-SPEED VIDEO THERMOGRAPHY
    ARAO Susumu; SUZUKI Mitsuhiko; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of the JSME international conference on motion and power transmissions, The Japan Society of Mechanical Engineers, 2017 3 - 1, 2017
  • BOND GRAPH SIMULATION OF GEAR TRANSMISSION CONSIDERING TOOTH MESHING STIFFNESS AND DAMPING
    NAKAGAWA Masao; NISHIDA Dai; SAH Deepak; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of the JSME international conference on motion and power transmissions, The Japan Society of Mechanical Engineers, 2017 4 - 15, 2017
  • Fundamental study of magnetic polishing for Ti-alloy by use of machining centre
    Tatsuya Furuki; Toshiki Hirogaki; Eiichi Aoyama
    Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017, 263 - 264, 2017, International conference proceedings
  • Determining stable machining conditions through inverse analysis of machined surface characteristics following chatter vibration in end-milling
    Kaito Aotani; Toshiki Hirogaki; Eiichi Aoyama
    ISAAT 2017 - Proceedings of the 20th International Symposium on Advances in Abrasive Technology, 408 - 418, 2017, International conference proceedings
  • Development of cBN electroplated end-mill combined cutting and grinding for precision machining of CFRP
    Tatsuya Furuki; Yugo Kabaya; Toshiki Hirogaki; Eiichi Aoyama; Kiyofumi Inaba; Kazuna Fujiwara
    ISAAT 2017 - Proceedings of the 20th International Symposium on Advances in Abrasive Technology, 8(3) 347 - 355, 2017, International conference proceedings
  • Control method of chatter vibration based on inverse analysis of end milling chatter mark
    HIROGAKI Toshiki; AOYAMA Eiichi; SHIOTA Ryosuke; AOTANI Kaito
    Transactions of the JSME (in Japanese), The Japan Society of Mechanical Engineers, 83(848) 16 - 00362-16-00362, 2017
  • Process monitoring of round tools with a wireless communication holder system and infrared thermography
    MATSUDA Ryo; SHINDOU Masatoshi; HIROGAKI Toshiki; AOYAMA Eiichi; FURUKI Tatsuya
    Journal of the Japan Society for Abrasive Technology, The Japan Society for Abrasive Technology, 61(1) 34 - 39, 2017
  • Investigation of torsional analysis of planetary gear train for mesh coupled vibration based on a bond graph model
    NAKAGAWA Masao; NISHIDA Dai; HIROGAKI Toshiki; AOYAMA Eiichi
    Transactions of the JSME (in Japanese), The Japan Society of Mechanical Engineers, 83(849) 16 - 00360-16-00360, 2017
  • Improvement of machining accuracy under constant feed speed at milling point with a five axis controlled machining center based on Advanced control Method
    SUZUKI Takamaru; MARUYAMA Yuma; HIROGAKI Toshiki; AOYAMA Eiichi
    Transactions of the JSME (in Japanese), The Japan Society of Mechanical Engineers, 83(849) 16 - 00518-16-00518, 2017
  • Investigation of dynamic characteristic of instantaneous center of rotation planet gear based on the sun gear speed contour map in continuously varying transmission under three-axis driving of planetary gear train
    Masao Nakagawa; Dai Nishida; Toshiki Hirogakj; Eiiclii Aoyama
    Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, The Japan Society for Precision Engineering, 83(6) 572 - 578, 2017, Scientific journal
  • Investigation of hammering task and application based on its hit sound feedback motion with an industrial humanod robot
    HIROGAKI Toshiki; AOYAMA Eiichi; SUGIURA Yoshihisa; KOBAYASHI Asuka
    Transactions of the JSME (in Japanese), The Japan Society of Mechanical Engineers, 83(855) 17 - 00132-17-00132, 2017
  • Polishing characteristics of buff machining using non-woven nanofiber fabric
    WU Wei; AOYAMA Eiichi; HIROGAKI Toshiki; IKEGAYA Morihiko; ECHIZENYA Takatsugu; SOTA Hiroyoshi
    Journal of the Japan Society for Abrasive Technology, The Japan Society for Abrasive Technology, 61(11) 600 - 606, 2017
  • Monitoring and analysis of rotational vibration in tap and endmill tool with a wireless multifunctional tool holder system
    MATSUDA Ryo; SHINDOU Masatoshi; HIROGAKI Toshiki; AOYAMA Eiichi
    Journal of the Japan Society for Abrasive Technology, The Japan Society for Abrasive Technology, 61(12) 674 - 680, 2017
  • Fundamental study on machine tools equipped with vibration suppression mechanism based on left and right ball screw and with an ultra-high speed spindle for micro-drilling
    HIROGAKI Toshiki; AOYAMA Eiichi; YAMASITA Tatsuya; KISHIMOTO Masahiro; KAWAZOE Yuya
    Transactions of the JSME (in Japanese), The Japan Society of Mechanical Engineers, 83(850) 17 - 00052-17-00052, 2017
  • Investigation of noise features of planetary gear trains based on human aural characteristic
    Masao Nakagawa; Dai Nishida; Deepak Sah; Toshiki Hirogaki; Eiichi Aoyama
    Proceedings of the ASME Design Engineering Technical Conference, AMER SOC MECHANICAL ENGINEERS, 8, 2017, International conference proceedings
  • Process design and control method of laser via hole drilling of printed wiring boards based on high speed camera monitor
    Koji Kanki; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa
    Proceedings of the ASME Design Engineering Technical Conference, AMER SOC MECHANICAL ENGINEERS, 4, 2017, International conference proceedings
  • Analysis of drilling process knowledge derived from microdrill catalog database using data-mining method
    Shogo Tabata; Eiichi Aoyama; Toshiki Hirogaki; Hiroyuki Kodama
    Proceedings of the ASME Design Engineering Technical Conference, AMER SOC MECHANICAL ENGINEERS, 1, 2017, International conference proceedings
  • Study on oil adsorption & polishing characteristics by novel nanofiber pad for ultra-precision abrasive machining
    Wei Wu; Lei Ma; Toshiki Hirogaki; Eiichi Aoyama; Morihiko Ikegaya; Takatsugu Echizenya; Hiroyoshi Sota
    ASME 2017 12th International Manufacturing Science and Engineering Conference, MSEC 2017 collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing, AMER SOC MECHANICAL ENGINEERS, 1, 2017, International conference proceedings
  • Control of pressing force in magnetic abrasive finishing using permanent magnet end-mill tool
    Lei Ma; Toshiki Hirogaki; Eiichi Aoyama; Wei Wu; Tatsuya Furuki
    ASME 2017 12th International Manufacturing Science and Engineering Conference, MSEC 2017 collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing, AMER SOC MECHANICAL ENGINEERS, 1, 2017, International conference proceedings
  • Development of novel test stand for three-axis driving planetary gear train control and analysis of novel PGT for noise reduction
    Masao Nakagawa; Dai Nishida; Deepak Sah; Toshiki Hirogaki; Eiichi Aoyama
    INTERNATIONAL CONFERENCE ON GEARS 2017/ INTERNATIONAL CONFERENCE ON GEAR PRODUCTION/ INTERNATIONAL CONFERENCE ON HIGH PERFORMANCE PLASTIC GEARS 2017, VOLS 1 AND 2, V D I-V D E - VERLAG GMBH, 2294(1-2) 331 - 340, 2017, International conference proceedings
  • Monitoring of rotational vibration in tap and endmill processes with a wireless multifunctional tool holder system
    Ryo Matsuda; Masatoshi Shindou; Toshiki Hirogaki; Eiichi Aoyama
    ISAAT 2017 - Proceedings of the 20th International Symposium on Advances in Abrasive Technology, FUJI TECHNOLOGY PRESS LTD, 12(6) 899 - 904, 2017, International conference proceedings
  • Elucidation of polishing mechanism used in magnetic polishing brush
    Lei Ma; Tatsuya Furuki; Wei Wu; Eiichi Aoyama; Toshiki Hirogaki
    International Symposium on Flexible Automation, ISFA 2016, IEEE, 31 - 37, 16 Dec. 2016, International conference proceedings
  • Whole quenching of small thin plate with low-power semiconductor laser based on feed-speed combination problem
    Yuki Manabe; Ryosuke Oda; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa
    International Journal of Automation Technology, 10(6) 923 - 933, Nov. 2016, Scientific journal
  • Investigation of Laser Hardening and Forming Method Based on In-situ Monitoring Its Process
    Oda Ryosuke; Hirota Tomonao; Manabe Yuki; Hirogaki Toshiki; Aoyama Eiichi
    同志社大学ハリス理化学研究報告 = The Harris science review of Doshisha University, Alternative:Harris Science Research Institute of Doshisha University, 57(3) 198 - 203, Oct. 2016
  • Eco-efficiency evaluation of binder-free green composites made from bamboo fibres extracted with a machining centre
    Sachiko Ogawa; Keiji Ogawa; Toshiki Hirogaki; Eiichi Aoyama
    Advances in Materials and Processing Technologies, 2(4) 418 - 426, 01 Oct. 2016, Scientific journal
  • Basic Performance of Small Size and High Strength Spiral Bevel Gear Fabricated with a Five Axis Controlled Machining Center
    Toyota Shinya; Shibata Takashi; Saito Masahiro; Hirogaki Toshiki; Aoyama Eiichi
    同志社大学ハリス理化学研究報告 = The Harris science review of Doshisha University, Alternative:Harris Science Research Institute of Doshisha University, 57(2) 125 - 130, Jul. 2016
  • Development of direct drive motor for machine tools and consideration of its performance in machining
    池上 貴一; 廣垣 俊樹; 青山 栄一
    砥粒加工学会誌, 砥粒加工学会, 60(6) 333 - 337, Jun. 2016
  • Novel polishing method of glass materials under ultra-low pressure conditions considering stick-slip phenomena with a five-axes closed-link compact robot and fine diamond stone
    Wei Wu; Yudong Liu; Toshiki Hirogaki; Eiichi Aoyama
    Advances in Materials and Processing Technologies, 2(2) 175 - 191, Apr. 2016, Scientific journal
  • Development of magnetic polishing method with 5- Axis machining center for aspherical shape
    Tatsuya Furuki; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa
    Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016, 2016, International conference proceedings
  • Investigation of dynamic behavior of planet gears in planetary gear sets for three-axis driving
    Masao Nakagawa; Mohamed Ali Ben Abbes; Toshiki Hirogaki; Eiichi Aoyama
    MECHANICAL ENGINEERING JOURNAL, JAPAN SOC MECHANICAL ENGINEERS, 3(1), 2016, Scientific journal
  • Quality control method of blind via hole based on monitoring Cu direct laser processing in high heat radiation printed circuit board with a high speed camera
    HIROGAKI Toshiki; AOYAMA Eiichi; OGAWA Keiji; ONCHI Suguru; IOZUMI Munetaka
    Transactions of the JSME (in Japanese), The Japan Society of Mechanical Engineers, 82(836) 15 - 00491-15-00491, 2016
  • Multipoint simultaneous monitoring of end-mill processing temperatures with wireless telegraphic multifunctional tool holder
    SHINDOU Masatoshi; MATSUDA Ryou; FURUKI Tatsuya; HIROGAKI Toshiki; AOYAMA Eiichi
    Journal of the Japan Society for Abrasive Technology, The Japan Society for Abrasive Technology, 60(3) 146 - 152, 2016
  • Novel monitoring method of gear meshing based on combination of continuous shots with a thermography and prediction of tooth surface temperature by heat circuit network model
    HIROGAKI Toshiki; AOYAMA Eiichi; NIWA Kodai; SUZUKI Mitsuhiko
    Transactions of the JSME (in Japanese), The Japan Society of Mechanical Engineers, 82(844) 16 - 00355-16-00355, 2016
  • Elucidation of the polishing mechanism by the magnetic polishing brush
    MA Lei; FURUKI Tatsuya; WU Wei; HIROGAKI Toshiki; AOYAMA Eiichi
    Transactions of the JSME (in Japanese), The Japan Society of Mechanical Engineers, 82(844) 16 - 00253-16-00253, 2016
  • Investigation of cBN electroplated end-mill shape for CFRP machining
    Tatsuya Furuki; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa; Kiyofumi Inaba; Kazuna Fujiwara
    Materials Science Forum, Trans Tech Publications Ltd, 874 463 - 468, 2016, International conference proceedings
  • Estimation of unsteady and steady polishing force in magnetic abrasive finishing using a permanent magnet end-mill tool
    Lei Ma; Tatsuya Furuki; Wei Wu; Toshiki Hirogaki; Eiichi Aoyama
    Materials Science Forum, Trans Tech Publications Ltd, 874 178 - 183, 2016, International conference proceedings
  • Pulse laser irradiation control method for blind via-hole drilling of printed wiring boards based on high-speed camera monitoring
    Koji Kanki; Munetaka Iozumi; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa
    Materials Science Forum, Trans Tech Publications Ltd, 874 285 - 290, 2016, International conference proceedings
  • Proposed stable machining condition search method based on machined surface information after end milling
    Kaito Aotani; Ryosuke Shiota; Toshiki Hirogaki; Eiichi Aoyama
    Materials Science Forum, Trans Tech Publications Ltd, 874 423 - 428, 2016, International conference proceedings
  • Development of automatic servo tuning function in rotary axis with DDM for machine tools and its performance for stable machining
    Takakazu Ikegami; Toshiki Hirogaki; Eiichi Aoyama
    Materials Science Forum, Trans Tech Publications Ltd, 874 511 - 516, 2016, International conference proceedings
  • Monitoring method of process temperature and vibration of rotating machining tool with a wireless communication holder system
    Ryo Matsuda; Masatoshi Shindou; Tatsuya Furuki; Toshiki Hirogaki; Eiichi Aoyama
    Materials Science Forum, Trans Tech Publications Ltd, 874 519 - 524, 2016, International conference proceedings
  • Process control using a novel machine tool equipped with automatic idling reduction system
    Ryo Ota; Eiichi Aoyama; Wataru Sato; Toshiki Hirogaki
    Proceedings of the ASME Design Engineering Technical Conference, AMER SOC MECHANICAL ENGINEERS, 4, 2016, International conference proceedings
  • Investigation of power transmission mechanism under three-axis driving planetary gear train based on the mechanism
    Masao Nakagawa; Dai Nishida; Toshiki Hirogaki; Eiichi Aoyama
    Proceedings of the ASME Design Engineering Technical Conference, AMER SOC MECHANICAL ENGINEERS, 3, 2016, International conference proceedings
  • Novel monitoring method of hypoid gear meshing based on thermal network model and infrared thermography imagery
    Mitsuhiko Suzuki; Toshiki Hirogaki; Eiichi Aoyama
    Proceedings of the ASME Design Engineering Technical Conference, AMER SOC MECHANICAL ENGINEERS, 3, 2016, International conference proceedings
  • Magnetic polishing of micro channel using a ball-nose end-mill type tool with a compact machine tool
    Hiroki Murakami; Tatsuya Furuki; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa
    Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015, 18 Oct. 2015, International conference proceedings
  • Investigation of micro-drilling conditions of printed wiring board based on data-mining of catalog information
    Yoshimasa Suzuki; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa; Hiroyuki Kodama
    Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015, 18 Oct. 2015, International conference proceedings
  • Influence of servo activation frequency on servo motor temperature of machine tools equipped with idling reduction system
    Masahiro Niki; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa
    Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015, 18 Oct. 2015, International conference proceedings
  • Laser irradiation control method in via-hole drilling of printed wiring board based on high speed camera monitoring
    Munetaka Iozumi; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa
    Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015, 18 Oct. 2015, International conference proceedings
  • Motion control of working plate supported with dual-arm robot with various postures
    Yuichi Horizumi; Wei Wu; Toshiki Hirogaki; Eiichi Aoyama
    Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015, 18 Oct. 2015, International conference proceedings
  • Novel arrangement method of two industrial robots based on monitoring
    Takashi Sugiura; Toshiki Hirogaki; Eiichi Aoyama
    Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015, 18 Oct. 2015, International conference proceedings
  • Fabrication of complex shape products made of binder-free green composite using bamboo fibers extracted with a machining center
    Yusuke Nakamura; Minh Huynh; Keiji Ogawa; Toshiki Hirogaki; Eichi Aoyama; Hiromichi Nobe
    Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015, AMER SOC MECHANICAL ENGINEERS, 4, 18 Oct. 2015, International conference proceedings
  • Investigation of Characteristics of Gear Meshing Noise under Three-Axis Driving Planetary Gear Set
    Masao Nakagawa; Mohamed Ali Ben Abbes; Toshiki Hirogaki; Eiichi Aoyama
    SAE International Journal of Passenger Cars - Mechanical Systems, SAE INT, 9(1) 6 - 16, 01 Sep. 2015, Scientific journal
  • Effects of diamondcoated tools in micro-drilling of CFRP plates using a high-speed spindle
    Keiji Ogawa; Heisaburo Nakagawa; Toshiki Hirogaki; Eiichi Aoyama
    Advances in Materials and Processing Technologies, 1(1-2) 192 - 200, Apr. 2015, Scientific journal
  • Novel attempt of fabricating magic-mirror with a machining center
    廣垣 俊樹; 青山 栄一; 古木 辰也
    砥粒加工学会誌, 砥粒加工学会, 59(4) 175 - 178, Apr. 2015
  • Development of magnetic polishing method of aspherical shape using small ball end mill type tool
    Tatsuya Furuki; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa
    Proceedings of the 15th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2015, 33 - 34, 2015, International conference proceedings
  • Study on the dynamic accuracy in skillful operating of working plate to control of ball rolling motion with a dual arm robot
    KINOSHITA Shun; WU Wei; HIROGAKI Toshiki; AOYAMA Eiichi
    TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, The Japan Society of Mechanical Engineers, 81(822) 14 - 00486-14-00486, 2015
  • Investigation of tool internal temperature in end-milling process with a wireless holder system
    SHINDOU Masatoshi; MATSUDA Ryo; FURUKI Tatsuya; HIROGAKI Toshiki; AOYAMA Eiichi
    TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, The Japan Society of Mechanical Engineers, 81(826) 15 - 00046-15-00046, 2015
  • Hot press fabrication of hemisphere shell product made of bamboo fibers extracted with a machining center
    Toshiki Hirogaki; Eiichi Aoyama; Minh Huynh; Yusuke Nakamura; Keiji Ogawa; Hiromichi Nobe
    Journal of Advanced Mechanical Design, Systems and Manufacturing, Japan Society of Mechanical Engineers, 9(3), 2015, Scientific journal
  • High efficiency AGV transportation system based on knowledge of taxis: Strategy for AGV behavior at intersections
    Taichi Ito; Eiichi Aoyama; Toshiki Hirogaki; Keiji Ogawa; Daisuke Mitsuoka
    Key Engineering Materials, Trans Tech Publications Ltd, 625 366 - 371, 2015, International conference proceedings
  • Binder-free green composite using bamboo fibers extracted with a machining center - Investigation of optimal bamboo fiber length
    Shinya Imura; Keiji Ogawa; Toshiki Hirogaki; Eiichi Aoyama
    Key Engineering Materials, Trans Tech Publications Ltd, 625 355 - 359, 2015, International conference proceedings
  • Satiny and continuous-curvature corrugated surface generation by integrating end-milling processes and magnetic polishing with a machining center
    Tatsuya Furuki; Lei Ma; Toshiki Hirogaki; Eiichi Aoyama
    Key Engineering Materials, Trans Tech Publications Ltd, 625 247 - 252, 2015, International conference proceedings
  • Estimation of micro-hole shape in laser direct drilling of high heat radiation typed printed circuit boards (Process monitoring with a high speed camera)
    Suguru Onchi; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa
    Key Engineering Materials, Trans Tech Publications Ltd, 625 172 - 177, 2015, International conference proceedings
  • Monitoring of end-mill process based on infrared imagery with a high speed thermography
    Masatoshi Shindou; Hiroyuki Kodama; Toshiki Hirogaki; Eiichi Aoyama
    Key Engineering Materials, Trans Tech Publications Ltd, 625 213 - 218, 2015, International conference proceedings
  • Fabrication of electroplated CBN end-mill for high-efficiency face milling of carbon fiber reinforced plastic
    Tatsuya Furuki; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa; Kiyofumi Inaba
    ASME 2015 International Manufacturing Science and Engineering Conference, MSEC 2015, AMER SOC MECHANICAL ENGINEERS, 1, 2015, International conference proceedings
  • Motion tuning method of linear axes and rotary axis under a constant cutting speed vector at end-milling point with a five-axis controlled machining center
    Takamaru Suzuki; Takayuki Akai; Eiichi Aoyama; Takakazu Ikegami; Toshiki Hirogaki; Keiji Ogawa
    ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), AMER SOC MECHANICAL ENGINEERS, 2B-2015, 2015, International conference proceedings
  • Detection of motion error under synchronous two-axis control of a dual arm robot based on monitoring of ball rolling motion on a plate
    Wei Wu; Shun Kinoshita; Toshiki Hirogaki; Eiichi Aoyama
    International Journal of Automation Technology, 9(1) 33 - 42, 2015, Scientific journal
  • Application of Magnetic Polishing With Ball Nose Shaped Tool for Microchannel Shape
    Yusuke Takebayashi; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa; Shreyes N. Melkote
    JOURNAL OF MICRO AND NANO-MANUFACTURING, ASME, 2(2), Jun. 2014, Scientific journal
  • Development of feedback system of hitting sound with a humanoid robot : attempt of hitting motion for task based on playing metallophone
    Hirogaki Toshiki; Aoyama Eiichi; Sugiura Yoshihisa; Kiuchi Hirofumi
    The science and engineering review of Doshisha University, Doshisha University, 54(4) 249 - 258, Jan. 2014
  • INFLUENCE OF THE NUMBER OF AGVS ON PRODUCTS CONVEYANCE EFFICIENCY IN AGV TRANSPORTATION SYSTEM BASED ON KNOWLEDGE OF TAXIS
    Tsuguhito Suzuki; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa; Taichi Ito
    PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2014, VOL 1A, AMER SOC MECHANICAL ENGINEERS, 2014, International conference proceedings
  • DEVELOPMENT OF MAGNETIC POLISHING FOR MICRO CHANNEL WITH A BALL-NOSE-SHAPED TOOL
    Yusuke Takebayashi; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa; Shreyes N. Melkote
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2013, VOL 2A, AMER SOC MECHANICAL ENGINEERS, 2014, International conference proceedings
  • Basic study on molding and characteristics of pure natural fiber spur gears made from bamboo fibers extracted with a machining center
    HIROGAKI Toshiki; AOYAMA Eiichi; OGAWA Keiji; NISHIDA Showgo; OISHI Akihiro; NOBE Hiromich
    TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, The Japan Society of Mechanical Engineers, 80(818) DSM0309 - DSM0309, 2014
  • Elucidation of end-mill temperature based on an infrared imagery with a thermography
    SHINDOU Masatoshi; MATSUDA Ryou; KODAMA Hiroyuki; HIROGAKI Toshiki; AOYAMA Eiichi
    Journal of the Japan Society for Abrasive Technology, The Japan Society for Abrasive Technology, 58(7) 457 - 462, 2014
  • Fabrication of magic-mirror with magnetic polishing and end-milling on machining center
    FURUKI Tatsuya; MA Lei; HIROGAKI Toshiki; AOYAMA Eiichi; OGAWA Keiji
    TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, The Japan Society of Mechanical Engineers, 80(820) DSM0390 - DSM0390, 2014
  • Experimental verification of end-milling condition decision support system using data-mining for difficult-to-cut materials
    Hiroyuki Kodama; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa; Koichi Okuda
    Advanced Materials Research, Trans Tech Publications Ltd, 1017 334 - 339, 2014, International conference proceedings
  • Entire hardening of small thin plate with a small power semiconductor laser considering plate deformation
    Ryosuke Oda; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa
    Advanced Materials Research, Trans Tech Publications Ltd, 1017 636 - 641, 2014, International conference proceedings
  • Influence of tool shape and coating type on machined surface quality in face milling of CFRP
    Tatsuya Furuki; Toshiki Hirogaki; Eiichi Aoyama; Hiroyuki Kodama; Keiji Ogawa
    Advanced Materials Research, Trans Tech Publications Ltd, 1017 310 - 315, 2014, International conference proceedings
  • Investigation of step micro-drilling motion based on modeling of high speed spindle driving axis on machine tools equipped with vibration-proof mechanism
    Tatsuya Yamashita; Toshiki Hirogaki; Eiichi Aoyama; Ryousuke Shibata; Keiji Ogawa
    Advanced Materials Research, Trans Tech Publications Ltd, 1017 642 - 647, 2014, International conference proceedings
  • Monitoring of end-mill temperature with infrared thermography and wireless tool holder system
    Masatoshi Shindou; Ryo Matsuda; Tatsuya Furuki; Toshiki Hirogaki; Eiichi Aoyama
    Advanced Materials Research, Trans Tech Publications Ltd, 1017 624 - 629, 2014, International conference proceedings
  • Investigation of glass polishing motion based on micro-oscillating pressing force with a compact robot and fine diamond stone
    Wei Wu; Yu Dong Liu; Toshiki Hirogaki; Eiichi Aoyama
    Advanced Materials Research, Trans Tech Publications Ltd, 1017 129 - 134, 2014, International conference proceedings
  • Investigation of temperature hysteresis on tooth contact surface of hypoid gears using middle-infrared ray imagery based on thermal network model
    Toshiki Hirogaki; Eiichi Aoyama; Raphael Pihet; Koudai Niwa
    Journal of Advanced Mechanical Design, Systems and Manufacturing, JAPAN SOC MECHANICAL ENGINEERS, 8(3) 1 - 15, 2014, Scientific journal
  • Impact task model and acoustic recognition system with a humanoid robot for an automation of hammering test
    Kento Hayashi; Toshiki Hirogaki; Eiichi Aoyama; Yoshihisa Sugiura
    Proceedings of the ASME Design Engineering Technical Conference, AMER SOC MECHANICAL ENGINEERS, 5B, 2014, International conference proceedings
  • Investigation of drilling conditions of printed circuit board based on data mining method from tool catalog data-base
    Hisaya Haneda; Hiroyuki Kodama; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa
    Advanced Materials Research, TRANS TECH PUBLICATIONS LTD, 939 547 - 554, 2014, International conference proceedings
  • Contact analysis of tooth surface in gear meshing based on infrared ray imagery
    Kouji Nakajima; Toshiki Hirogaki; Eiichi Aoyama; Masaki Nagata
    Materials Science Forum, TRANS TECH PUBLICATIONS LTD, 773-774 563 - 572, 2014, International conference proceedings
  • Investigation of gear meshing noise of planetary gear mechanism for hybrid vehicles
    Takahiro Miyata; Longbo Kang; Toshiki Hirogaki; Eiichi Aoyama
    Advanced Materials Research, TRANS TECH PUBLICATIONS LTD, 939 555 - 562, 2014, International conference proceedings
  • Novel monitoring method of gear meshing using a high response infrared thermography
    Kodai Niwa; Raphael Pihet; Toshiki Hirogaki; Eiichi Aoyama
    Proceedings of the ASME Design Engineering Technical Conference, AMER SOC MECHANICAL ENGINEERS, 8, 2014, International conference proceedings
  • Investigation of chatter vibration in end-milling process by considering coupled system model
    Kosuke Hattori; Hiroyuki Kodama; Toshiki Hirogaki; Eiichi Aoyama
    Advanced Materials Research, TRANS TECH PUBLICATIONS LTD, 939 201 - 208, 2014, International conference proceedings
  • Experimental verification of ball-nose end-milling conditons derived from catalog-mining system based on classified inclination angles of machining surface
    Hiroyuki Kodama; Koichi Okuda; Yui Sugaya; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa
    ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), AMER SOC MECHANICAL ENGINEERS, 2B, 2014, International conference proceedings
  • Application of idling stop technology for servo motors in machine tool operations to reduce electric power consumption
    Tomohiro Nagawaki; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa
    Advanced Materials Research, TRANS TECH PUBLICATIONS LTD, 939 169 - 176, 2014, International conference proceedings
  • Development of recreating space technology for pipe joint manufacturing system with a dual industrial robot
    Sosuke Kuroyanagi; Toshiki Hirogaki; Eiichi Aoyama; Shinya Omori; Koichi Mori; Kenichi Takahashi; Masaki Furuta
    Proceedings of the ASME Design Engineering Technical Conference, AMER SOC MECHANICAL ENGINEERS, 5B, 2014, International conference proceedings
  • A025 Experimental Verification of Ball End-milling Condition Decision Support System Applying Hierarchical and Non-hierarchical Clustering Methods
    KODAMA Hiroyuki; HIROGAKI Toshiki; AOYAMA Eiichi; OGAWA Keiji
    Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21, The Japan Society of Mechanical Engineers, 2013(7) 111 - 116, 06 Nov. 2013
  • Phenomena elucidation of micro-drilling for printed wiring boards containing high hardness fillers : Investigation of drilling force and drilling temperature
    長谷川 聡; 児玉 紘幸; 青山 栄一
    砥粒加工学会誌, 砥粒加工学会, 57(11) 741 - 744, Nov. 2013
  • Proposal of ball end-milling condition decision methodology using data-mining from tool catalog data
    Hiroyuki Kodama; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa
    Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, The Japan Society for Precision Engineering, 79(10) 964 - 969, Oct. 2013, Scientific journal
  • Estimation of two axes synchronous accuracy of plate pivot control with a dual arm robot by monitoring rolling motion of various kinds of balls on the plate
    Wu Wei; Hirogaki Toshiki; Aoyama Eiichi
    The science and engineering review of Doshisha University, Doshisha University, 54(1) 7 - 15, Apr. 2013
  • Elucidation of phenomena in micro-drilling for printed wiring boards containing high-hardness fillers : Investigation of drill wear and temperature during drilling
    FUNABIKI Taiji; KODAMA Hiroyuki; AOYAMA Eiichi; HIROGAKI Toshiki; OGAWA Keiji
    JSAT, The Japan Society for Abrasive Technology, 57(1) 27 - 32, 01 Jan. 2013
  • Skillful operating of working plate to control ball rolling motion with a dual arm robot
    Shun Kinoshita; Toshiki Hirogaki; Eiichi Aoyama; Wei Wu
    ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), AMER SOC MECHANICAL ENGINEERS, 2 B, 2013, International conference proceedings
  • Investigation of temperature hysteresis on tooth contact surface of hypoid gears using middle-infrared ray imagery
    Toshiki Hirogaki; Eiichi Aoyama; Kouji Nakajima; Koudai Niwa
    Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 79(806) 3965 - 3978, 2013, Scientific journal
  • Elucidation of process mechanisms of cu-direct laser drilling in printed wiring boards based on monitoring method with a high speed camera
    Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa; Suguru Onchi; Kuniyoshi Obata
    Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, The Japan Society of Mechanical Engineers, 79(801) 1798 - 1810, 2013, Scientific journal
  • An indicative end-milling condition decision support system using data-mining for difficult-to-cut materials based on comparison with irregular pitch and lead end-mill and general purpose end-mill
    Hiroyuki Kodama; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa
    Advanced Materials Research, TRANS TECH PUBLICATIONS LTD, 797 177 - 182, 2013, International conference proceedings
  • Use of catalog mining to extract valuable new knowledge hidden in trivial parameters
    Hiroyuki Kodama; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa
    ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), AMER SOC MECHANICAL ENGINEERS, 12, 2013, International conference proceedings
  • Investigation of motion control of liner axes and a rotary axis under constant feed speed vector at milling point with a five-axis machining center
    Yuma Maruyama; Takayuki Akai; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa
    ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), AMER SOC MECHANICAL ENGINEERS, 2 A, 2013, International conference proceedings
  • Development of estimating method for end-mill processes by an infrared imagery : investigation between tool temperature and process efficiency
    Shindou Masatoshi; Kodama Hiroyuki; Hirogaki Toshiki; Aoyama Eiichi
    The science and engineering review of Doshisha University, Doshisha University, 53(2) [77] - 83, Jul. 2012
  • Knowledge discovery from end-milling conditions decision methodology using data-mining:Proposal of data-mining method using non-trivial cutting tool parameters
    KODAMA Hiroyuki; HIROGAKI Toshiki; AOYAMA Eiichi; OGAWA Keiji
    Journal of the Japan Society for Abrasive Technology, The Japan Society for Abrasive Technology, 56(3) 173 - 178, 2012
  • Phenomena elucidation of micro-drilling for Printed Wiring Boards containing high hardness fillers
    FUNABIKI Taiji; KODAMA Hiroyuki; AOYAMA Eiichi; HIROGAKI Toshiki; OGAWA Keiji
    Journal of the Japan Society for Abrasive Technology, The Japan Society for Abrasive Technology, 56(4) 244 - 249, 2012
  • Aid of end-milling condition decision using data mining from tool catalog data for rough processing
    KODAMA Hiroyuki; HIROGAKI Toshiki; AOYAMA Eiichi; OGAWA Keiji
    Journal of the Japan Society for Abrasive Technology, The Japan Society for Abrasive Technology, 56(12) 824 - 829, 2012
  • Practical formula for predicting drill wear in micro-drilling of printed circuit boards containing high hardness fillers
    Taiji Funabiki; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa; Hiroyuki Kodama
    ASME/ISCIE 2012 International Symposium on Flexible Automation, ISFA 2012, AMER SOC MECHANICAL ENGINEERS, 541 - 547, 2012, International conference proceedings
  • Study on estimating motion error of synchronous two rotary axis control of working plate by monitoring ball rolling path on the plate and its sensitivity (estimation of influence of used balls with a dual-arm robot)
    Wei Wu; Toshiki Hirogaki; Eiichi Aoyama
    Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, The Japan Society of Mechanical Engineers, 78(793) 3317 - 3330, 2012, Scientific journal
  • Optimization of step micro drilling motion with high speed and short stroke in Printed Wiring Boards by response surface method
    Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa; Yutaka Takeda; Naoya Noguchi
    Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, The Japan Society of Mechanical Engineers, 78(788) 1280 - 1294, 2012, Scientific journal
  • Investigation and improving method of two axes synchronous accuracy of plate pivot control with a dual arm robot by estimating ball rolling motion on the plate
    Wei Wu; Toshiki Hirogaki; Eiichi Aoyama
    Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, The Japan Society of Mechanical Engineers, 78(785) 292 - 304, 2012, Scientific journal
  • Fabrication and performance evaluation of resources recycling self-adhesive products using only bamboo fibers extracted with a machining center
    Keiji Ogawa; Toshiki Hirogaki; Eiichi Aoyama; Sachiko Ogawa; Yota Takagi
    Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, The Japan Society of Mechanical Engineers, 78(787) 943 - 952, 2012, Scientific journal
  • Micro-drilling of CFRP plates using a high-speed spindle
    Keiji Ogawa; Heisaburo Nakagawa; Toshiki Hirogaki; Eiichi Aoyama
    Key Engineering Materials, TRANSACTION PUBLISHERS, 523-524 1035 - 1040, 2012, International conference proceedings
  • Investigation of micro-drilling for printed circuit boards containing high-hardness fillers
    Taiji Funabiki; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa; Hiroyuki Kodama
    Advanced Materials Research, TRANS TECH PUBLICATIONS LTD, 565 442 - 447, 2012, International conference proceedings
  • An end-milling condition decision support system using data-mining for difficult-to-cut materials
    Hiroyuki Kodama; Masatoshi Shindou; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa
    Advanced Materials Research, TRANS TECH PUBLICATIONS LTD, 565 472 - 477, 2012, International conference proceedings
  • Precise and high response measuring method of meshing force of planetary gear mechanism
    Yuta Morimoto; Toshiki Hirogaki; Eiichi Aoyama; Yasuhiro Uenishi
    Key Engineering Materials, TRANS TECH PUBLICATIONS LTD, 516 469 - 474, 2012, International conference proceedings
  • Shape reproduction of object with many-colored surface by photometric stereo method
    Ryo Nakatani; Toshiki Hirogaki; Eiichi Aoyama; Seishi Nakamura
    Key Engineering Materials, TRANS TECH PUBLICATIONS LTD, 516 492 - 497, 2012, International conference proceedings
  • High efficiency and eco-friendly heat treatment of small parts with a low-power diode laser beam
    Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa; Sachiko Ogawa; Rie Okamoto; Ryosuke Oda
    Key Engineering Materials, TRANSACTION PUBLISHERS, 523-524 232 - 237, 2012, International conference proceedings
  • Microvia formation for multi-layer PWB by laser direct drilling: Improvement of drilled hole quality of GFRP plates
    Keiji Ogawa; Toshiki Hirogaki; Eiichi Aoyama; Tsukasa Ayuzawa
    ASME 2012 International Manufacturing Science and Engineering Conference Collocated with the 40th North American Manufacturing Research Conference and in Participation with the Int. Conf., MSEC 2012, AMER SOC MECHANICAL ENGINEERS, 481 - 490, 2012, International conference proceedings
  • Cu-direct laser drilling of blind via-hole in multi-layer PWBs: Process visualization using high-speed camera images
    Kuniyoshi Obata; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa
    Key Engineering Materials, TRANS TECH PUBLICATIONS LTD, 516 30 - 35, 2012, International conference proceedings
  • Influence of polishing and pressing force on the material removal rate in fixed abrasive polishing with compact robot
    Masaki Niwa; Sachiko Ogawa; Toshiki Hirogaki; Eiichi Aoyama; Yoshiaki Onchi
    Advanced Materials Research, TRANS TECH PUBLICATIONS LTD, 565 243 - 248, 2012, International conference proceedings
  • Control of percussion motion by sound feedback with a humanoid robot
    Eiichi Aoyama; Toshiki Hirogaki; Hirohumi Kiuchi; Yoshihisa Sugiura
    Key Engineering Materials, TRANSACTION PUBLISHERS, 523-524 699 - 704, 2012, International conference proceedings
  • Optimization of feed speed and stroke for step micro hole drilling of printed wiring boards by response surface method
    Naoya Noguchi; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa; Yutaka Takeda
    Key Engineering Materials, TRANSACTION PUBLISHERS, 523-524 509 - 514, 2012, International conference proceedings
  • LCA estimation of end-milling condition derived from catalog-mining considering human learning curve
    Hiroyuki Kodama; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa; Junichi Sakamoto
    Proceedings of the ASME Design Engineering Technical Conference, AMER SOC MECHANICAL ENGINEERS, 2(PARTS A AND B) 1163 - 1172, 2012, International conference proceedings
  • Autonomous conveyance control of AGV based on knowledge of taxi transportation rules
    Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa; Takahiro Kono; Daisuke Mitsuoka
    Key Engineering Materials, TRANSACTION PUBLISHERS, 523-524 693 - 698, 2012, International conference proceedings
  • Investigation of rotational-axis and linear-axis operation based on power consumption with desktop five-axis controlled machine tools
    Katsumasa Suto; Eiichi Aoyama; Toshiki Hirogaki; Keiji Ogawa
    Key Engineering Materials, TRANS TECH PUBLICATIONS LTD, 516 510 - 515, 2012, International conference proceedings
  • Investigation of synchronous accuracy of dual arm motion of industrial robot
    Wei Wu; Toshiki Hirogaki; Eiichi Aoyama
    Key Engineering Materials, TRANS TECH PUBLICATIONS LTD, 516 234 - 239, 2012, International conference proceedings
  • Proposal of improving method of rotational 2-axis synchronous accuracy of plate motion control with a dual arm robot by estimating ball rolling motion on the plate
    Wei Wu; Toshiki Hirogaki; Eiichi Aoyama
    Key Engineering Materials, TRANSACTION PUBLISHERS, 523-524 889 - 894, 2012, International conference proceedings
  • Gloss estimating method of finished surface machined by ball nose end-milling under constant contact angle with a five-axis controlled machining center
    Kenichi Terada; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa
    Key Engineering Materials, TRANS TECH PUBLICATIONS LTD, 516 475 - 480, 2012, International conference proceedings
  • Binder-free green composite using bamboo fibres extracted with a machining centre: Influence of moisture absorption on mechanical properties
    Yota Takagi; Keiji Ogawa; Toshiki Hirogaki; Eiichi Aoyama
    Key Engineering Materials, TRANS TECH PUBLICATIONS LTD, 516 215 - 221, 2012, International conference proceedings
  • Surface generation for magic-mirror by end-milling and magnetic polishing with digitally functioned CNC machining center
    Ryohei Kawai; Eiichi Aoyama; Toshiki Hirogaki; Keiji Ogawa; Kazuya Sawa
    Key Engineering Materials, TRANSACTION PUBLISHERS, 523-524 368 - 373, 2012, International conference proceedings
  • Proposal of ball end-milling condition decision methodology using data-mining from tool catalog data
    Hiroyuki Kodama; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa; Hiroaki Hukasawa
    Key Engineering Materials, TRANSACTION PUBLISHERS, 523-524 386 - 391, 2012, International conference proceedings
  • Motion control of rolling ball by operating the working plate with a dual-arm robot
    Wei Wu; Toshiki Hirogaki; Eiichi Aoyama
    International Journal of Automation Technology, 6(1) 75 - 82, Jan. 2012, Scientific journal
  • Investigation of end-milling condition decision methodology based on data mining for tool catalog database
    Hiroyuki Kodama; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa
    International Journal of Automation Technology, 6(1) 61 - 74, Jan. 2012, Scientific journal
  • Autonomous AGV conveyance system based on taxi transportation strategy (effect of introduction of multi-loaded AGVs on conveyance performance)
    Ogawa Keiji; Hirogaki Toshiki; Aoyama Eiichi; Kono Takahiro
    The science and engineering review of Doshisha University, Doshisha University, 52(1) 54 - 61, Apr. 2011
  • IT aided improvement of green die oriented toward sustainable manufacturing system (application to eco-friendly product made from bamboo fibers without adhesive)
    Nobe Hiromichi; Hirogaki Toshiki; Aoyama Eiichi; Ogawa Keiji
    The science and engineering review of Doshisha University, Doshisha University, 52(1) 68 - 75, Apr. 2011
  • Decision methodology of end-milling conditions using data-mining
    Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa; Hiroyuki Kodama; Tasuku Kitamura
    Precision Engineering, ELSEVIER SCIENCE INC, 35(2) 197 - 203, Apr. 2011, Scientific journal
  • Environmental Impact of Desktop-Sized Five-Axis CNC Machine Tool Estimated with LCA
    HIROGAKI Toshiki; AOYAMA Eiichi; OGAWA Keiji; NIIYAMA Toru; SUZUKI Masashi; IWAMA Masatoshi
    JEE, The Japan Society of Mechanical Engineers, 6(2) 242 - 252, 2011
  • 907 Development of Photocatalysis Filter using Ti metal fiber aided TiO_2 and Hydroxyapatite
    Kodama Hiroyuki; Hirogaki Toshiki; Aoyama Eiichi; Ogawa Keiji
    Proceedings of JSPE Semestrial Meeting, The Japan Society of Mechanical Engineers, 2011 255 - 256, 2011
  • Improvement accuracy of cutting condition decision formula using catalog mining
    Hiroaki Fukasawa; Hiroyuki Kodama; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa
    Proceedings of the 6th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2011, 2011, International conference proceedings
  • Effects on proposed end-milling condition decision-support system using data mining on saving power consumption
    Hiroyuki Kodama; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa; Junichi Sakamoto
    Proceedings of the 6th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2011, 2011, International conference proceedings
  • Investigation of heat-treatment method by low-powered laser for small parts and evaluation by life cycle assessment
    Rie Okamoto; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa; Sachiko Ogawa
    Proceedings of the 6th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2011, 2011, International conference proceedings
  • Tooth contact evaluation of hypoid gears using middle-infrared ray imagery
    Toshiki Hirogaki; Eiichi Aoyama; Masaki Nagata; Takahiro Iida; Yoshitaka Usui
    Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, The Japan Society of Mechanical Engineers, 77(776) 1574 - 1584, 2011, Scientific journal
  • Determination of end milling conditions using data mining:Combination effects of hierarchical and nonhierarchical clustering for tool catalog data
    KODAMA Hiroyuki; HIROGAKI Toshiki; AOYAMA Eiichi; OGAWA Keiji
    Journal of the Japan Society for Abrasive Technology, The Japan Society for Abrasive Technology, 55(1) 42 - 47, 2011
  • Surface generation for Makyoh magic-mirror by end-milling with digitally functioned CNC machining center and magnetic polishing
    AOYAMA Eiichi; HIROGAKI Toshiki; OKUBO Kazuya; OGAWA Keiji; SAWA Kazuya; OGAWA Sachiko; KAWAI Ryouhei
    Journal of the Japan Society for Abrasive Technology, The Japan Society for Abrasive Technology, 55(9) 540 - 545, 2011
  • Sustainable manufacturing system focusing on the natural growth of bamboo: Life cycle assessment of binder-free composites made from bamboo fibers extracted with a machining center
    Keiji Ogawa; Toshiki Hirogaki; Eiichi Aoyama; Yota Takagi; Sachiko Ogawa
    Proceedings of the ASME Design Engineering Technical Conference, AMER SOC MECHANICAL ENGINEERS, 9 911 - 917, 2011, International conference proceedings
  • Aid of end-milling condition decision using data mining from tool catalog data for rough processing
    Hiroyuki Kodama; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa
    Advanced Materials Research, TRANS TECH PUBLICATIONS LTD, 325 345 - 350, 2011, International conference proceedings
  • Microvia formation for multi-layer PWB by laser direct drilling: Improvement of hole quality by silica fillers in build-up layer
    Keiji Ogawa; Toshiki Hirogaki; Eiichi Aoyama; Kuniyoshi Obata; Tsukasa Ayuzawa
    ASME 2011 International Manufacturing Science and Engineering Conference, MSEC 2011, AMER SOC MECHANICAL ENGINEERS, 2 419 - 428, 2011, International conference proceedings
  • Direct laser drilling in copper clad Printed Wiring Boards (visualization of removal process based on high-speed camera images)
    Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa; Tsukasa Ayuzawa
    Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, The Japan Society of Mechanical Engineers, 76(771) 3143 - 3149, Nov. 2010, International conference proceedings
  • Investigation on end-mill cutter location based on constant feed-speed vector at cutting point with a five-axis machining center
    Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa; Tsugutoshi Kawaguchi; Takahiro Horiuchi
    Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, The Japan Society for Precision Engineering, 76(8) 912 - 917, Aug. 2010, Scientific journal
  • Environmentally-Friendly Laser Hardening Method with Low Power Laser
    Ogawa Sachiko; Hirogaki Toshiki; Aoyama Eiichi
    The science and engineering review of Doshisha University, Doshisha University, 51(2) 65 - 70, Jul. 2010
  • Study on Application of Controlling a Plate with a Dual-arm Robot
    Wu Wei; Hirogaki Toshiki; Aoyama Eiichi
    The science and engineering review of Doshisha University, Doshisha University, 51(1) 9 - 15, Apr. 2010
  • Investigation of contact characteristics of long-fiber reinforced plastic gears based on observation with a high-speed camera
    Tomoki Otawa; Toshiski Hirogaki; Eiichi Aoyama
    ASME 2010 International Manufacturing Science and Engineering Conference, MSEC 2010, AMER SOC MECHANICAL ENGINEERS, 2 591 - 597, 2010, International conference proceedings
  • Method of Automatic Tooth Contact Evaluation Using Near-Infrared Ray Imagery(Machine Elements, Design and Manufacturing)
    HIROGAKI Toshiki; AOYAMA Eiichi; IIDA Takahiro; NAGATA Masaki; USUI Yoshitaka; MATSUBARA Masami; UENISHI Yasuhiro
    Transactions of the Japan Society of Mechanical Engineers Series C, The Japan Society of Mechanical Engineers, 76(768) 2135 - 2141, 2010
  • Sustainable manufacturing system focusing on the natural growth of bamboo: (Evaluation of environmental impact by LCA)
    Keiji Ogawa; Toshiki Hirogaki; Eiichi Aoyama; Mitsuaki Taniguchi; Sachiko Ogawa
    Journal of Advanced Mechanical Design, Systems and Manufacturing, JAPAN SOC MECHANICAL ENGINEERS, 4(2) 531 - 542, 2010, Scientific journal
  • Investigation of environmental impact of downsized five-axis-controlled machine tool
    Sachiko Ogawa; Toshiki Hirogaki; Eiichi Aoyama; Toru Niiyama
    AIP Conference Proceedings, AMER INST PHYSICS, 1315 1515 - 1520, 2010, International conference proceedings
  • Effect of rapid-feed step-drilling cycle and super-high-speed spindle for high-speed micro drilling in printed wiring boards
    Eiichi Aoyama; Toshiki Hirogaki; Keiji Ogawa; Satoshi Nojiri; Yutaka Takeda
    Key Engineering Materials, TRANS TECH PUBLICATIONS LTD, 447 448 836 - 840, 2010, International conference proceedings
  • CU-direct laser drilling of blind via-hole in multi-layer pwbs influence of surface treatment on drilled hole quality
    Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa; Tsukasa Ayuzawa
    Proceedings of the ASME InterPack Conference 2009, IPACK2009, AMER SOC MECHANICAL ENGINEERS, 1 229 - 237, 2010, International conference proceedings
  • Fabrication of binder-free green composite using bamboo fibers extracted with a machining center
    Keiji Ogawa; Toshiki Hirogaki; Eiichi Aoyama; Mitsuaki Taniguchi; Sachiko Ogawa
    Key Engineering Materials, TRANS TECH PUBLICATIONS LTD, 447 448 760 - 764, 2010, International conference proceedings
  • Quality control method based on gear tooth contact evaluation using near-infrared ray imagery
    Masaki Nagata; Toshiki Hirogaki; Eiichi Aoyama; Takahiro Iida; Yasuhiro Uenishi; Masami Matsubara; Yoshitaka Usui
    Key Engineering Materials, TRANS TECH PUBLICATIONS LTD, 447 448 569 - 573, 2010, International conference proceedings
  • Study on CAM system for drilling in printed wiring boards: Optimization of stacking sheet considering drill processing temperature
    Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa; Tsuyoshi Okawa
    Proceedings of the ASME InterPack Conference 2009, IPACK2009, AMER SOC MECHANICAL ENGINEERS, 1 219 - 227, 2010, International conference proceedings
  • Investigation of eco-friendly fixed-abrasive polishing with compact robot
    Sachiko Ogawa; Shinpei Okumura; Toshiki Hirogaki; Eiichi Aoyama; Yoshiaki Onchi
    Advanced Materials Research, TRANS TECH PUBLICATIONS LTD, 126-128 415 - 420, 2010, International conference proceedings
  • Autonomous distributed AGV system based on taxi transportation strategy: Effect of multiple-load AGVs on conveyance efficiency
    Takahiro Kono; Keiji Ogawa; Toshiki Hirogaki; Eiichi Aoyama
    ASME 2010 International Manufacturing Science and Engineering Conference, MSEC 2010, AMER SOC MECHANICAL ENGINEERS, 2 553 - 560, 2010, International conference proceedings
  • Cutting condition decision methodology based on data-mining of tool catalog data
    Hiroyuki Kodama; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa
    ASME 2010 International Manufacturing Science and Engineering Conference, MSEC 2010, AMER SOC MECHANICAL ENGINEERS, 2 491 - 499, 2010, International conference proceedings
  • Development of self-adhesive bamboo fiber composite with three-dimensional shape using fibers extracted with machining center
    Sachiko Ogawa; Keiji Ogawa; Toshiki Hirogaki; Eiichi Aoyama; Mitsuaki Taniguchi; Hiromichi Nobe
    ASME 2010 International Manufacturing Science and Engineering Conference, MSEC 2010, AMER SOC MECHANICAL ENGINEERS, 1 53 - 59, 2010, International conference proceedings
  • Digital manufacturing of Makyoh-magic-mirror for difficult-tomachine material to process
    Kazuya Sawa; Toshiki Hirogaki; Eiichi Aoyama; Kazuya Okubo; Keiji Ogawa
    ASME 2010 International Manufacturing Science and Engineering Conference, MSEC 2010, AMER SOC MECHANICAL ENGINEERS, 1 155 - 162, 2010, International conference proceedings
  • Direct laser drilling in copper clad printed wiring boards suppression of overhang length on drilled hole using PWBs mixed with silica fillers in build-up layer
    Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa; Shogo Matsutani; Tsukasa Ayuzawa
    Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, The Japan Society of Mechanical Engineers, 75(759) 3082 - 3088, Nov. 2009, Scientific journal
  • Investigation on finished surface machined by five-axis machining center -ball nose end-milling under constant contact angle and optimum machining condition
    Tosbiki Hirogaki; Eiichi Aoyama; Keiji Ogawa; Tsugutoshi Kawaguchi; Hidenori Sueda; Ryou Shuuchi
    Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, The Japan Society for Precision Engineering, 75(10) 1238 - 1244, Oct. 2009, Scientific journal
  • In-situ measurement method using a probing system to create a tool path for natural form
    Sachiko Ogawa; Toshiki Hirogaki; Eiichi Aoyama
    Arabian Journal for Science and Engineering, SPRINGER HEIDELBERG, 34(1 C) 159 - 166, Jun. 2009, Scientific journal
  • GI-01 OPTIMIZATION OF METHOD FOR APPLICATION OF TOOTH CONTACT EVALUATION USING INFRARED RAY IMAGERY(INSPECTION OF GEARS)
    NAGATA Masaki; HIROGAKI Toshiki; AOYAMA Eiichi; IIDA Takahiro; UENISHI Yasuhiro; MATSUBARA Masami; USUI Yoshitaka
    MPT ... Fukuoka : the JSME international conference on motion and power transmissions, The Japan Society of Mechanical Engineers, 2009(0) 169 - 174, 13 May 2009
  • Estimation of environmental impact on desktop size five-axis control machine tools by LCA
    Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa; Toru Niiyama; Masashi Suzuki; Masatoshi Iwama
    Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, The Japan Society of Mechanical Engineers, 75(752) 1135 - 1142, Apr. 2009, Scientific journal
  • Estimation of environmental impact on desktop-size multifunctional machine tools by LCA
    Masafumi Suzuki; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa; Masatoshi Iwama
    Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2009, The Japan Society of Mechanical Engineers, 2009(0) 61 - 66, 2009, International conference proceedings
  • Investigation of finished surface machined by ball nose end-milling under constant contact angle with a five-axis controlled machining center
    Ryo Shuchi; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa
    Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2009, The Japan Society of Mechanical Engineers, 2009(0) 83 - 88, 2009, International conference proceedings
  • Sustainable manufacturing system focusing on the natural growth of bamboo
    Mitsuaki Taniguchi; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa; Sachiko Ogawa
    Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2009, The Japan Society of Mechanical Engineers, 2009(0) 523 - 528, 2009, International conference proceedings
  • Investigation of sustainable and reliable manufacturing system based on the environmental impact
    Sachiko Ogawa; Toshiki Hirogaki; Eiichi Aoyama
    Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2009, The Japan Society of Mechanical Engineers, 2009(0) 517 - 522, 2009, International conference proceedings
  • Tooth bending strength of hybrid reinforced plastics gears
    Eiichi Aoyama; Toshiki Hirogaki; Teturou Ise; Eiji Hara; Hirokazu Taniuchi; Yoshihiro Kawasaki
    Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, The Japan Society of Mechanical Engineers, 75(749) 184 - 190, Jan. 2009, Scientific journal
  • Thermal damage of micro diameter hole drilled by super-high-speed spindle in PWB
    Hiroshi Nojiri; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa; Tsuyoshi Otsuka
    Key Engineering Materials, TRANS TECH PUBLICATIONS LTD, 389-390 55 - 60, 2009, Scientific journal
  • Strength criteria for designing hybrid-fiber reinforced plastic gears
    Yoshihiro Kawasaki; Toshiki Hirogaki; Eiji Hara; Eiichi Aoyama; I. S.E. Tetsurou
    ASME International Mechanical Engineering Congress and Exposition, Proceedings, AMER SOC MECHANICAL ENGINEERS, 4 59 - 64, 2009, International conference proceedings
  • Design approach of gear teeth number for vehicle transmission considering human aural characteristics
    Takayuki Araragi; Masaki Nagata; Yasuhiro Uenishi; Toshiki Hirogaki; Eiichi Aoyama; Masaya Miyazawa
    Proceedings of the ASME Design Engineering Technical Conference, AMER SOC MECHANICAL ENGINEERS, 6 987 - 995, 2009, International conference proceedings
  • Shape reproduction and cutter location using the normal vector generated by photometric stereo method
    Seishi Nakamura; Eiichi Aoyama; Toshiki Hirogaki; Masayuki Fukura; Hiromichi Nobe
    Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2009, AMER SOC MECHANICAL ENGINEERS, 2 483 - 489, 2009, International conference proceedings
  • Nano-Mirror Surface Generation for Hardened Steel Using Ultra-Low Pressure Super-Finishing.
    Sachiko Ogawa; Eiichi Aoyama; Toshiki Hirogaki; Yoshiaki Onchi; Kentarou Oku
    International Journal of Automation Technology, 3(4) 433 - 444, 2009, Scientific journal
  • Direct laser drilling in copper clad printed wiring boards (effect of surface treatment on drilled blind via-hole quality)
    Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa; Shogo Matsutani; Tsukasa Ayuzawa
    Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, The Japan Society of Mechanical Engineers, 74(11) 1411 - 1417, Nov. 2008, Scientific journal
  • Study on CAM systems for printed wiring boards - Investigation of drilling tool path considering PWBs temperature
    Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa; Mitsutaka Matsumura; Seita Sumida
    Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, The Japan Society for Precision Engineering, 74(7) 713 - 718, Jul. 2008, Scientific journal
  • Study on thermal damage of micro diameter hole drilled by super-high-speed spindle in PWB and optimum drilling conditon
    Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa; Tsuyoshi Otsuka; Hiroshi Nojiri
    Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, The Japan Society of Mechanical Engineers, 74(7) 1894 - 1900, Jul. 2008, Scientific journal
  • Autonomous Conveyance System using Knowledge of Taxi Traveling
    Ogawa Keiji; Hirogaki Toshiki; Aoyama Eiichi; Yoneda Tetsurou
    The science and engineering review of Doshisha University, Doshisha University, 49(1) 37 - 44, Apr. 2008
  • Basic study on fiber reinforced plastic gears
    廣垣 俊樹; 青山 栄一
    The Science and engineering review of Doshisha University, 同志社大学理工学研究所, 48(4) 65 - 70, Jan. 2008
  • Nano-Surface Generation Using Low-Pressure Super-Finishing With Fine Diamond Stones
    Sachiko Ogawa; Eiichi Aoyama; Toshiki Hirogaki; Yoshiaki Onchi
    JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, JAPAN SOC MECHANICAL ENGINEERS, 2(6) 1041 - 1054, 2008, Scientific journal
  • Design Method of Number of Teeth for Low Noise Gears Considering Human Aural Characteristics
    Takayuki Araragi; Yasuhiro Uenishi; Toshiki Hirogaki; Eiichi Aoyama
    JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, JAPAN SOC MECHANICAL ENGINEERS, 2(2) 203 - 213, 2008, Scientific journal
  • Bamboo Fiber Extraction Method Using a Machining Center
    Keiji Ogawa; Toshiki Hirogaki; Eiichi Aoyama; Hajime Imamura
    JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, JAPAN SOC MECHANICAL ENGINEERS, 2(4) 550 - 559, 2008, Scientific journal
  • Design method of optimum number of teeth for vehicle transmission considering human aural characteristics
    Takayuki Araragi; Yasuhiro Uenishi; Toshiki Hirogaki; Eiichi Aoyama
    Proceedings of the ASME Design Engineering Technical Conference, AMER SOC MECHANICAL ENGINEERS, 2(PARTS A AND B) 671 - 678, 2008, International conference proceedings
  • Estimation of micro-drilled hole wall of PWBs using data-mining
    Toshiki Hirogaki; Eiichi Aoyama; Miho Hsaki; Keiji Ogawa; Katsutoshi Yamauchi; Tsuyoshi Otsuka
    Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, The Japan Society of Mechanical Engineers, 73(5) 1591 - 1597, May 2007, Scientific journal
  • Data-mining of factors affecting circuit connection reliability on laser-drilled micro blind via holes in multi-layer PWBs
    Keiji Ogawa; Toshiki Hirogaki; Eiichi Aoyama; Shinji Maeda; Hisahiro Inoue; Tsutao Katayama
    JSME International Journal, Series A: Solid Mechanics and Material Engineering, JAPAN SOC MECHANICAL ENGINEERS, 49(4) 522 - 528, Apr. 2007, Scientific journal
  • Shape control of fibers obtained from bamboo with mechanical machining
    OGAWA Keiji; HIROGAKI Toshiki; AOYAMA Eiichi
    Journal of the Japan Society for Abrasive Technology, 砥粒加工学会, 51(2) 80 - 83, 01 Feb. 2007
  • CAM system based on constant drill hole temperature for drilling in printed wiring boards
    Toshiki Hirogaki; Keiji Ogawa; Eiichi Aoyama; Seita Sumida
    2007 Proceedings of the ASME InterPack Conference, IPACK 2007, 1 901 - 907, 2007, International conference proceedings
  • Proposed bamboo fiber extraction method using a machining center
    Hajime Imamura; Keiji Ogawa; Toshiki Hirogaki; Eiichi Aoyama
    LEM 2007 - 4th International Conference on Leading Edge Manufacturing in 21st Century, Proceedings, The Japan Society of Mechanical Engineers, 2007(0) 9F635 , 2007, International conference proceedings
  • Nano-surface generation of glass using low-pressure super-finishing with fine-grit stones
    Sachiko Ogawa; Eiichi Aoyama; Toshiki Hirogaki; Yoshiaki Onchi
    LEM 2007 - 4th International Conference on Leading Edge Manufacturing in 21st Century, Proceedings, The Japan Society of Mechanical Engineers, 2007(0) 7E510 , 2007, International conference proceedings
  • Investigation of machined surface of hemispherical shape in ball end milling with contour line path
    Tsugutoshi Kawaguchi; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa
    LEM 2007 - 4th International Conference on Leading Edge Manufacturing in 21st Century, Proceedings, The Japan Society of Mechanical Engineers, 2007(0) 8B226 , 2007, International conference proceedings
  • Development of a design system for reverse engineering using the photometric stereo method
    Masayuki Fukura; Eiichi Aoyama; Toshiki Hirogaki; Keiji Ogawa; Nobe Hiromichi
    LEM 2007 - 4th International Conference on Leading Edge Manufacturing in 21st Century, Proceedings, The Japan Society of Mechanical Engineers, 2007(0) 7F603 , 2007, International conference proceedings
  • Investigation on ball nose end-milled cylindrical surface with a scanning line cutter path: Estimation of influence of ball nose accuracy using a Makyoh-topography image method
    Toshiki Hirogaki; Eiichi Aoyama; Ryoji Machinaka; Hidenori Sueda; Keiji Ogawa
    Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, The Japan Society for Precision Engineering, 73(1) 96 - 101, Jan. 2007, Scientific journal
  • Influence of CU surface treatment on the CU-direct via hole drilling efficiency of PWBS
    Toshiki Hirogaki; Keiji Ogawa; Eiichi Aoyama; Shogo Matsutani
    2007 Proceedings of the ASME InterPack Conference, IPACK 2007, 1 895 - 900, 2007, International conference proceedings
  • Quality control of tooth contact of gear using infrared ray imagery
    Takahiro Iida; Yasuhiro Uenishi; Toshiki Hirogaki; Eiichi Aoyama
    LEM 2007 - 4th International Conference on Leading Edge Manufacturing in 21st Century, Proceedings, JAPAN SOC MECHANICAL ENGINEERS, 2(4) 701 - 710, 2007, International conference proceedings
  • Investigation of drill hole quality of multi-layer PWBs for high current capacity
    Eiichi Aoyama; Toshiki Hirogaki; Keiji Ogawa; Kenichi Mori; Yuusuke Itagaki
    2007 Proceedings of the ASME InterPack Conference, IPACK 2007, AMER SOC MECHANICAL ENGINEERS, 1 909 - 915, 2007, International conference proceedings
  • Circuit connection reliability analysis of laser-drilled blind via holes using data-mining method
    Keiji Ogawa; Toshiki Hirogaki; Eiichi Aoyama; Heisaburo Nakagawa
    2007 Proceedings of the ASME InterPack Conference, IPACK 2007, AMER SOC MECHANICAL ENGINEERS, 2 603 - 610, 2007, International conference proceedings
  • Super-finishing using fine cBN stone to achieve nano-mirror surfaces on hardened steel
    Sachiko Naka; Eiichi Aoyama; Toshiki Hirogaki; Yoshiaki Onchi; Keiji Ogawa
    ISAM 2007 - IEEE International Symposium on Assembly and Manufacturing, IEEE, 124 - 129, 2007, International conference proceedings
  • Forming of Via Holes by Cu direct laster process as dry process in manufacturing of printed wiring boards
    Hirogaki Toshiki; Aoyama Eiichi; Matsuoka Takashi; Doi Nobuyuki; Matsutani Shougo; Ogawa Keiji
    The science and engineering review of Doshisha University, Doshisha University, 47(2) 112 - 117, Jul. 2006
  • Determining method of machining conditions using data-mining of tool catalog data
    Hirogaki Toshiki; Aoyama Eiichi; Ohsaki Miho; Kawai Teppei; Kitamura Tasuku; Ogawa Keiji
    The science and engineering review of Doshisha University, Doshisha University, 47(1) 18 - 24, Apr. 2006
  • Evaluation of blind via hole quality on multi-layer printed wiring boards by Cu direct laser drilling
    Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa; Ryu Minagi; Toshiki Murakami; Nobuyuki Doi
    Zairyo/Journal of the Society of Materials Science, Japan, The Society of Materials Science, Japan, 55(3) 335 - 340, Mar. 2006, Scientific journal
  • Quality control of fibers end-milled from bamboo pipe using spiral tool path
    K. Ogawa; E. Aoyama; T. Hirogaki; Y. Tomioka; H. Nakagawa
    WIT Transactions on the Built Environment, 85 169 - 178, 2006, International conference proceedings
  • Cu-direct via-hole drilling of aramid fiber reinforced build-up layer by CO2 laser beam
    Eiichi Aoyama; Keiji Ogawa; Ryu Minagi; Toshiki Hirogaki; Nobuyuki Doi
    Proceedings of the ASME/Pacific Rim Technical Conference and Exhibition on Integration and Packaging of MEMS, NEMS, and Electronic Systems: Advances in Electronic Packaging 2005, AMER SOC MECHANICAL ENGINEERS, PART C 1797 - 1804, 2006, International conference proceedings
  • CAM systems based on traveling salesman problem from time perspective for high density through-hole drilling
    Toshiki Hirogaki; Keiji Ogawa; Mitsutaka Matsumura; Eiichi Aoyama; Naohide Hashimoto
    Proceedings of the ASME/Pacific Rim Technical Conference and Exhibition on Integration and Packaging of MEMS, NEMS, and Electronic Systems: Advances in Electronic Packaging 2005, AMER SOC MECHANICAL ENGINEERS, PART C 1783 - 1789, 2006, International conference proceedings
  • Study on CAM Systems for Printed Wiring Boards : Optimization of Moving Route by TSP Method
    HIROGAKI Toshiki; AOYAMA Eiichi; OGAWA Keiji; HASHIMOTO Naohide; MATUMURA Mitutaka
    Journal of the Japan Society for Precision Engineering. Supplement. Contributed papers, The Japan Society for Precision Engineering, 71(3) 384 - 388, 05 Mar. 2005
  • Construction of an estimating system of gear noise using thermography
    Yasuhiro Uenishi; Toshiki Hirogaki; Eiichi Aoyama; Yuusuke Nakano; Hiromi Tange; Tutao Katayama
    Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, The Japan Society of Mechanical Engineers, 71(3) 1085 - 1090, Mar. 2005, Scientific journal
  • An estimation of cylindrical surface obtained by ball end-milling using makyoh-topography images
    Ryoji Machinaka; Toshiki Hirogaki; Eiichi Aoyama; Keiji Ogawa
    LEM 2005 - 3rd International Conference on Leading Edge Manufacturing in 21st Century, The Japan Society of Mechanical Engineers, 2005(0) 35 - 38, 2005, International conference proceedings
  • Development of multi-functional mini machine tool integrated heat treatment processes
    Mikiliito Fujioka; Toshiki Hirogaki; Eiiclii Aoyama; Keiji Ogawa; Masatoshi Iwama
    LEM 2005 - 3rd International Conference on Leading Edge Manufacturing in 21st Century, The Japan Society of Mechanical Engineers, 2005(0) 479 - 484, 2005, International conference proceedings
  • Shape control of fibers end-milled from bamboo with a machining center
    Keiji Ogawa; Toshiki Hirogaki; Eiichi Aoyama; Yosliihiro Tomioka; Tomohiro Shiomi
    LEM 2005 - 3rd International Conference on Leading Edge Manufacturing in 21st Century, The Japan Society of Mechanical Engineers, 2005(0) 565 - 570, 2005, International conference proceedings
  • Ultra-low pressure super-finishing to produce nano-surfaces
    Sachiko Naka; Eiichi Aoyama; Toshiki Hirogaki; Yoshiaki Onchi; Keiji Ogawa; Kentaro Oku
    LEM 2005 - 3rd International Conference on Leading Edge Manufacturing in 21st Century, The Japan Society of Mechanical Engineers, 2005(0) 1187 - 1192, 2005, International conference proceedings
  • Application of Data-mining to factor analysis of micro-drilled hole quality for multi-layer PWBS
    Toshiki Hirogaki; Keiji Ogawa; Eiichi Aoyama; Kenichi Mori
    Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference - DETC2005, AMER SOC MECHANICAL ENGINEERS, 3 A 189 - 196, 2005, International conference proceedings
  • Quality control of micro-drilled hole wall of PWBS using data-mining
    Eiichi Aoyama; Toshiki Hirogaki; Keiji Ogawa; Tsuyoshi Otsuka; Katsutoshi Yamauchi
    Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference - DETC2005, AMER SOC MECHANICAL ENGINEERS, 3 A 203 - 210, 2005, International conference proceedings
  • The method of tooth bending strength calculation for gears made of phenolic resin reinforced by cotton woven cloth
    Toshiki Hirogaki; Eiichi Aoyama; Tsutao Katayama; Kazuya Sugimura; Shinya Iwasaki; Yoshinori Yagura
    Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, The Japan Society of Mechanical Engineers, 70(12) 3590 - 3596, Dec. 2004, Scientific journal
  • Evaluation of two-component powder mixing by vertical vibration investigation of powder behavior and mixed state by internal pressure fluctuation
    T. Katayama; E. Aoyama; K. Yamamoto; S. Sakaue
    Journal of Materials Processing Technology, 155-156(1-3) 1571 - 1576, 30 Nov. 2004, Scientific journal
  • Optimizing drilling conditions in printed circuit board by considering hole quality Optimization from viewpoint of drill-movement time
    Eiichi Aoyama; Toshiki Hirogaki; Tsutao Katayama; Naohide Hashimoto
    Journal of Materials Processing Technology, 155-156(1-3) 1544 - 1550, 30 Nov. 2004, Scientific journal
  • Application of Data-mining to Manufacturing Engineering Using Face Method
    Ogawa Keiji; Hirogaki Toshiki; Aoyama Eiichi
    The science and engineering review of Doshisha University, Doshisha University, 45(3) 151 - 158, Oct. 2004
  • Design systems for gear elements made of cotton fiber-reinforced plastics
    Toshiki Hirogaki; Eiichi Aoyama; Tsutao Katayama; Shinya Iwasaki; Yoshinori Yagura; Kazuya Sugimura
    Composite Structures, 66(1-4) 47 - 52, Oct. 2004, Scientific journal
  • Study on splitting of bamboo fibers due to freezing and tensile strength of FRTP using bamboo fibers
    Masako Ashimori; Tsutao Katayama; Eiichi Aoyama; Syoji Nagai
    JSME International Journal, Series A: Solid Mechanics and Material Engineering, The Japan Society of Mechanical Engineers, 47(4) 566 - 569, Oct. 2004, Scientific journal
  • Monitoring of micro drilling of printed wiring boards by thermography - Drilling temperature of printed wiring boards reinforced by Aramid Fiber
    Toshiki Hirogaki; Eiichi Aoyama; Tsutao Katayama; Heisaburo Nakagawa; Takahide Nakamura; Youhei Simokawa; Hisahiro Inoue
    Zairyo/Journal of the Society of Materials Science, Japan, The Society of Materials Science, Japan, 53(5) 553 - 559, May 2004, Scientific journal
  • Factor analysis on internal damage around small daimeter drilled hole of GFRP printed wiring boards by data mining method
    Toshiki Hirogaki; Eiichi Aoyama; Tadayuki Ikuta; Hiromichi Nobe; Katutoshi Yamauchi; Tutao Katayama; Keiji Ogawa
    Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, The Japan Society of Mechanical Engineers, 70(5) 1535 - 1541, May 2004, Scientific journal
  • Method for cleaning laser-drilled holes on printed wiring boards by plasma treatment
    Toshiki Hirogaki; Eiichi Aoyama; Ryu Minagi; Keiji Ogawa; Tsutao Katayama; Takashi Matsuoka; Hisahiro Inoue
    JSME International Journal, Series C: Mechanical Systems, Machine Elements and Manufacturing, The Japan Society of Mechanical Engineers, 47(1) 105 - 110, Mar. 2004, Scientific journal
  • Drilling of Small Diameter Holes for Circuit Conection of Printed Wiring Board (Hole Internal Damage and Geometoric Dimension of Fiber Bundle of GFRP)
    Eiichi Aoyama; Toshiki Hirogaki; Koichi Yamura; Hiromichi Nobe; Tadayuki Ikuta; Tsutao Katayama
    Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, The Japan Society of Mechanical Engineers, 70(2) 596 - 601, Feb. 2004, Scientific journal
  • Data mining of optimum conditions to acquire bamboo micro-fiber with mechanical methods
    K. Ogawa; T. Hirogaki; E. Aoyama; T. Katayama
    High Performance Structures and Materials, 7 441 - 450, 2004, International conference proceedings
  • FE analysis to evaluate the damping ratio of spot-welded frame
    S. Enoki; E. Aoyama; T. Hirogaki; H. Andoh; M. Nakajima; Y. Takimoto; T. Katayama
    Proceedings of the 2004 International Conference on Noise and Vibration Engineering, ISMA, 1229 - 1234, 2004, International conference proceedings
  • Controlling method of sideband noise of meshing frequency for spiral bevel gears
    T. Hirogaki; E. Aoyama; T. Katayama; Y. Nakata; Y. Nakano; Y. Uenishi
    IMechE Event Publications, 2004 2 241 - 250, 2004, International conference proceedings
  • 技術紹介 布基材フェノール樹脂積層材を用いたFRP歯車の設計と応用
    廣垣 俊樹; 青山 栄一; 片山 傳生
    強化プラスチックス, 強化プラスチック協会, 50(1) 19 - 23, Jan. 2004
  • Load Support Properties Based on Composite Structure of Cortical Bone
    KATAYAMA Tsutao; AOYAMA Eiichi; YAMAMOTO Hidetake; TOKUDA Shuji
    日本臨床バイオメカニクス学会誌 = Proceedings of ... Annual Meeting of Japanese Society for Clinical Biomechanics and Related Research, 24 7 - 11, 01 Nov. 2003
  • Simple finite element model with beam elements for panel part of spot-welded frame-panel structure
    Shinichi Enoki; Eiichi Aoyama; Toshiki Hirogaki; Hiroaki Ando; Daisuke Kono; Tsutao Katayama
    Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, The Japan Society of Mechanical Engineers, 69(3) 805 - 811, Mar. 2003, Scientific journal
  • Quality estimation of small diameter via holes for circuit connection on multi-layer printed wiring boards using F. E. M (influence of heat input by laser drilling on copper foil at hole bottom)
    Toshiki Hirogaki; Eiichi Aoyama; Tsutao Katayama; Hisaya Kondou; Ryu Ninagi; Hisahiro Inoue
    Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, The Japan Society of Mechanical Engineers, 69(2) 509 - 515, Feb. 2003, Scientific journal
  • Through-hole drilling condition of FR-4 printed wiring boards based on preventing ion migration
    Eiichi Aoyama; Tadayuki Ikuta; Toshiki Hirogaki; Katsutoshi Yamauchi; Hiromichi Nobe; Tsutao Katayama; Hisahiro Inoue
    Advances in Electronic Packaging, 1 53 - 59, 2003, International conference proceedings
  • Quality estimating model based on temperature of hole bottom in laser drilling of blind holes
    Eiichi Aoyama; Ryu Minagi; Toshiki Hirogaki; Hisaya Kondou; Tsutao Katayama; Hisahiro Inoue
    Advances in Electronic Packaging, 1 317 - 323, 2003, International conference proceedings
  • Doshisha University
    青山 栄一
    砥粒加工学会誌 = Journal of the Japan Society of Grinding Engineers, 46(10) 502 - 503, 01 Oct. 2002
  • Blind via hole in multi-layer AFRP printed wiring boards by build-up process (Quality of hole drilled by small power laser)
    Toshiki Hirogaki; Heisaburo Nakagawa; Eiichi Aoyama; Tsutao Katayama; Hisahiro Inoue
    JSME International Journal, Series A: Solid Mechanics and Material Engineering, The Japan Society of Mechanical Engineers, 45(2) 282 - 289, Apr. 2002, Scientific journal
  • The research on abrasive grain falling in the super-finishing process by CBN stone
    Eiichi Aoyama; Toshiki Hirogaki; Yoshiaki Onchi; Kosuke Yanagitani; Nobuyuki Kawabata
    Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, The Japan Society of Mechanical Engineers, 68(3) 980 - 986, Mar. 2002, Scientific journal
  • Study on surface quality in laser machining of FRP for printed wiring boards - Temperature and heat affected damage in drilling of AFRP
    Toshiki Hirogaki; Eiichi Aoyama; Tsutao Katayama; Shinji Maeda; Hisaya Kondou; Hisahiro Inoue
    Zairyo/Journal of the Society of Materials Science, Japan, The Society of Materials Science, Japan, 51(2) 202 - 206, Feb. 2002, Scientific journal
  • Machinability of small diameter hole for circuit connection in multi-layer AFRP printed wiring boards (Comparison between kevlar fiber and thecnora fiber reinforcement)
    Toshiki Hirogaki; Heisaburo Nakagawa; Takahide Nakamura; Eiichi Aoyama; Tsutao Katayama; Hisahiro Inoue
    Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, The Japan Society of Mechanical Engineers, 68(2) 258 - 265, Feb. 2002, Scientific journal
  • Monitoring of rotational behavior on spiral bevel gear in gear housing using transfer function
    Eiichi Aoyama; Tsutao Katayama; Hiromi Tange; Toshiki Hirogaki; Yasuhiro Uenishi; Takesi Yamada; Yasuhiro Nakata
    Proceedings of the 2002 International Conference on Noise and Vibration Engineering, ISMA, 1545 - 1553, 2002, International conference proceedings
  • Evaluation method of damping ratio for spot-welded frame
    Tsutao Katayama; Eiichi Aoyama; Toshiki Hirogaki; Hiroaki Andoh; Shinichi Enoki; Masayoshi Nakajima
    Proceedings of the 2002 International Conference on Noise and Vibration Engineering, ISMA, 2291 - 2298, 2002, International conference proceedings
  • Study on injection molding of bamboo fiber reinforced thermo-plastics
    T. Katayama; T. Tanaka; Y. Suzuki; S. Nagai; E. Aoyama
    High Performance Structures and Materials, 4 87 - 96, 2002, International conference proceedings
  • Reliability for Circuit Connection on Laser Drilled Hole of Multi-Layre Printed Wiring Boards : Estimation of Thermal Stress in Copper Plating
    HIROGAKI Toshiki; AOYAMA Eiichi; KATAYAMA Tsutao; MAEDA Shinji; KONDOU Hisaya; INOUE Hisahiro
    Transactions of the Japan Society of Mechanical Engineers. C, The Japan Society of Mechanical Engineers, 67(664) 4017 - 4024, 25 Dec. 2001
  • Study on super-finishing by CBN stone (estimation of cutting performance using average crossing angle)
    Eiichi Aoyama; Kosuke Yanagitani; Yoshiaki Onchi; Toshiki Hirogaki; Atushi Irie
    Journal of Materials Processing Technology, 118(1-3) 429 - 435, 03 Dec. 2001, International conference proceedings
  • Drilled hole damage of small diameter drilling in printed wiring board
    Eiichi Aoyama; Hiromich Nobe; Toshiki Hirogaki
    Journal of Materials Processing Technology, 118(1-3) 436 - 441, 03 Dec. 2001, International conference proceedings
  • Deformation of grain boundaries in delamination destruction of UHMWPE joint components
    ONMORI Naoki
    日本臨床バイオメカニクス学会誌 = Proceedings of ... Annual Meeting of Japanese Society for Clinical Biomechanics and Related Research, 22 163 - 167, 01 Oct. 2001
  • Study on small diameter drilling in GFRP for printed wiring board - Influence of outer corner of drill tool on internal damage -
    H. Nobe; E. Aoyama; T. Hirogaki; T. Katayama
    Zairyo/Journal of the Society of Materials Science, Japan, The Society of Materials Science, Japan, 50(10) 1133 - 1139, Oct. 2001, Scientific journal
  • Proposal of Estimation Method of Internal Damege in Small Diameter Drilling in GFRP for Printed Wiring Boards Using Picture Processing System
    Nobe Hiromichi; Aoyama Eiichi; Hirogaki Toshiki
    The science and engineering review of Doshisha University, Doshisha University, 42(2) 81 - 89, Jul. 2001
  • Laser drilling of blind via holes in aramid and glass/epoxy composites for multi-layer printed wiring boards
    T. Hirogaki; E. Aoyama; H. Inoue; K. Ogawa; S. Maeda; T. Katayama
    Composites - Part A: Applied Science and Manufacturing, 32(7) 963 - 968, Jul. 2001, International conference proceedings
  • A new method for drilling smaller through-holes in printed wiring boards using a diamond coated drill
    Eiichi Aoyama; Tadayuki Ikuta; Toshiki Hirogaki; Hiromichi Nobe; Tsutao Katayama; Hisahiro Inoue
    Advances in Electronic Packaging, 3 1509 - 1515, 2001, International conference proceedings
  • Characteristics of blind hole in build-up layer made of aramid reinforced plastics
    Toshiki Hirogaki; Eiichi Aoyama; Tsutao Katayama; Hisaya Kondou; Hisahiro Inoue; Shinji Maeda
    Advances in Electronic Packaging, 1 587 - 592, 2001, International conference proceedings
  • Estimation of Variation of Tooth Bearing in a Gear Pair by Image Processing Method and It's Influence on Dynamic Behavior of Gear: Variation in Spiral Bevel Gear Pair
    Eiichi Aoyama; Toshiki Hirogaki; Yasuhiro Uenishi; Kazunori Nitta
    Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, The Japan Society of Mechanical Engineers, 67(661) 2945 - 2952, 2001, Scientific journal
  • New Measuring System of Gear Noise at Non-Integer Components of Meshing Frequency Using the Gear Checker.
    AOYAMA Eiichi; HIROGAKI Toshiki; UENISHI Yasuhiro; ANADA Yoshifumi; NAKATA Yasuhiro
    TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C, The Japan Society of Mechanical Engineers, 67(658) 1987 - 1992, 2001, Scientific journal
  • In-vivo Change in micromechanical properties of Vitamin E-added UHMWPE
    HIYOSHI Nobuyuki
    日本臨床バイオメカニクス学会誌 = Proceedings of ... Annual Meeting of Japanese Society for Clinical Biomechanics and Related Research, 21(21) 361 - 364, 01 Oct. 2000
  • Effect of sliding loci on subsurface cracks in UHMWPE
    ONMORI Naoki
    日本臨床バイオメカニクス学会誌 = Proceedings of ... Annual Meeting of Japanese Society for Clinical Biomechanics and Related Research, 21(21) 315 - 318, 01 Oct. 2000
  • Blind via hole in multilayer AFRP printed wiring boards by build up process (quality of drilled hole by small power laser)
    Toshiki Hirogaki; Heisaburo Nakagawa; Eiichi Aoyama; Tsutao Katayama; Hisahiro Inoue
    Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, The Japan Society of Mechanical Engineers, 66(652) 2268 - 2274, 2000, Scientific journal
  • Influence of tool wear on hole damage in small diameter drilling of printed wiring boards. Investigation based on estimation of cutting forces and internal damage
    H. Inoue; T. Hirogaki; E. Aoyama; T. Katayama
    Key Engineering Materials, TRANS TECH PUBLICATIONS LTD, 183(187 PART 1) 643 - 648, 2000, Scientific journal
  • Study on Small Diameter Drilling for Printed Wiring Board (Comparison of Carbide Drill and Diamond Coated Drill)
    Eiichi Aoyama; Toshiki Hirooaki; Hisahiro Inoue; Yasukazu Okuno; Kouichi Yamura; Hiromichi Nobe; Tsutao Katayama
    Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, The Japan Society of Mechanical Engineers, 66(644) 1355 - 1361, 2000, Scientific journal
  • Monitoring of Rotational Behavior on Spiral Bevel Gears
    Eiichi Aoyama; Toshiki Hirogaki; Yasuhiro Uenishi; Takeshi Yamada; Yasuhiro Nakata
    Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, The Japan Society of Mechanical Engineers, 66(644) 1284 - 1290, 2000, Scientific journal
  • Dynamic behaviour of spiral bevel gears - rotational vibration of gears under running conditions
    Y Uenishi; E Aoyama; Y Nakata; T Hirogaki
    SEVENTH INTERNATIONAL CONFERENCE ON VIBRATIONS IN ROTATING MACHINERY, PROFESSIONAL ENGINEERING PUBLISHING LTD, 2000(6) 223 - 231, 2000, International conference proceedings
  • Effect of gamma irradiation and vitamin E addition on mechanical properties of UHMWPE
    KITAKURA Takahiro
    日本臨床バイオメカニクス学会誌 = Proceedings of ... Annual Meeting of Japanese Society for Clinical Biomechanics and Related Research, 20(20) 303 - 306, 01 Oct. 1999
  • Telemetric Measurement of Compressive Load in Articular Cartilage
    HARADA Yasuji
    日本臨床バイオメカニクス学会誌 = Proceedings of ... Annual Meeting of Japanese Society for Clinical Biomechanics and Related Research, 20(20) 63 - 66, 01 Oct. 1999
  • Blind via hole drilling for multi-layers printed wiring board using laser beam - comparison between aramid and glass fiber reinforced PWB -
    Toshiki Hirogaki; Eiichi Aoyama; Hisahiro Inoue; Keiji Ogawa; Hiromichi Nobe; Tsutao Katayama
    Zairyo/Journal of the Society of Materials Science, Japan, The Society of Materials Science, Japan, 48(5) 467 - 472, 1999, Scientific journal
  • A Study on Small Diameter Drilling of GFRP for Printed Wiring Board (Influence of Fiber Bundle Thickness of Plain Woven Cloth on Damage of Drilled Hole)
    Toshiki Hirogaki; Eiichi Aoyama; Hisahiro Inoue; Hiromichi Nobe; Munehisa Gunjima; Yasuo Okuno; Tsutao Katayama
    Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, The Japan Society of Mechanical Engineers, 65(629) 382 - 388, 1999, Scientific journal
  • Fatigue Wear Properties of Vitamin E Contained UHMWPE
    TOMITA N.
    日本整形外科學會雜誌 = The Journal of the Japanese Orthopaedic Association, 72(8) S1280 , 25 Aug. 1998
  • Study on cause of internal damage of drilled GFRP (in case of small diameter drilling of plain woven cloth)
    H. Nobe; E. Aoyama; H. Inoue; T. Hirogaki; Y. Kitahara; T. Katayama; M. Gunjima; K. Ogawa; Y. Okuno
    Key Engineering Materials, 137 123 - 130, 1998, Scientific journal
  • フレーム材のねじり剛性を考慮した建設機械キャブの振動解析
    青山 栄一
    同志社大学理工学研究報告, 39(3) 7 , 1998
  • The effect of compresive load on formation of fatigue crack in UHMWPE
    TOMITA Naohide
    日本臨床バイオメカニクス学会誌 = Proceedings of ... Annual Meeting of Japanese Society for Clinical Biomechanics and Related Research, 18(18) 459 - 461, 01 Oct. 1997
  • Investigation of Small-Diameter Drilling of GFRP for Printed Wiring Board:Relation between Cutting Force and Surface Roughness
    AOYAMA Eiichi; HIROGAKI Toshiki; INOUE Hisahiro; GUNJIMA Munehisa; NOBE Hiromichi; KITAHARA Youji; KATAYAMA Tsutao
    TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C, The Japan Society of Mechanical Engineers, 63(608) 1371 - 1377, 1997
  • Investigation on cutting mechanism in small diameter drilling for GFRP (thrust force and surface roughness at drilled hole wall)
    K. Ogawa; E. Aoyama; H. Inoue; T. Hirogaki; H. Nobe; Y. Kitahara; T. Katayama; M. Gunjima
    Composite Structures, 38(1-4) 343 - 350, 1997, Scientific journal
  • Influence of tool wear on internal damage in small diameter drilling in GFRP
    Hisahiro Inoue; Eiichi Aoyama; Toshiki Hirogaki; Keiji Ogawa; Hiroshi Matushita; Youji Kitahara; Tsutao Katayama
    Composite Structures, 39(1-2) 55 - 62, 1997, Scientific journal
  • A study on surface quality in laser machining of GFRP for printed wiring board - Temperature and damage at workpiece in drilling
    Toshiki Hirogaki; Eiichi Aoyama; Hisahiro Inoue; Tsutao Katayama
    Zairyo/Journal of the Society of Materials Science, Japan, The Society of Materials Science, Japan, 46(11) 1329 - 1334, 1997, Scientific journal
  • Improvement in hole quality at laser drilling of GFRP
    Eiichi Aoyama; Toshiki Hirogaki; Hisahiro Inoue; Hiromichi Nobe; Munehisa Gunjima; Youji Kitahara; Tsutao Katayama
    Zairyo/Journal of the Society of Materials Science, Japan, The Society of Materials Science, Japan, 45(5) 577 - 581, May 1996, Scientific journal
  • Study on drilled hole quality in small diameter drilling of GFRP
    Eiichi Aoyama; Toshiki Hirogaki; Hisahiro Inoue; Munehisa Gunjima; Hiromichi Nobe; Youji Kitahara; Tsutao Katayama
    Zairyo/Journal of the Society of Materials Science, Japan, The Society of Materials Science, Japan, 45(5) 522 - 526, May 1996, Scientific journal
  • Tooth Deflection of Oerlikon-Type Spiral Bevel Gears.
    AOYAMA Eiichi; HIROGAKI Toshiki; UENISHI Yasuhiro; ARAI Norihisa; HASHIMOTO Kouji
    TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C, The Japan Society of Mechanical Engineers, 62(595) 1080 - 1086, 1996
  • A Study on Dynamic Behavior of the Oerlikon-type Spiral Bevel Gears. Rotational Vibration of Gears under Running Conditions.
    HIROGAKI Toshiki; AOYAMA Eiichi; UENISI Yasuhiro; HASHIMOTO Kouji; NITTA Kazunori; ARAI Norihisa
    TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C, The Japan Society of Mechanical Engineers, 62(597) 1998 - 2004, 1996
  • Study on small diameter drilling in GFRP
    E. Aoyama; H. Inoue; T. Hirogaki; H. Nobe; Y. Kitahara; T. Katayama
    Composite Structures, 32(1-4) 567 - 573, 1995, Scientific journal
  • 球状黒鉛鋳鉄の高速穴あけ時の加工精度に関する研究
    青山 栄一
    同志社大学理工学研究報告, 35(3-4) 271 , 1995
  • A Study on Diffusion Wear on the Rake Face of Boride-Cermet Tools.
    Arai Norihisa; Hamajima Kazuo; Aoyama Eiichi; Horie Noritoshi; Ikeguchi Yoshihisa; Yamamoto Syuzo
    TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C, The Japan Society of Mechanical Engineers, 59(559) 915 - 920, 1993, Scientific journal
  • Study on the Fitting Surface Conditions of Force-Fitted Cylinder and Gear.
    ARAI Norihisa; AOYAMA Eiichi; SUGIMOTO Takatoshi; KITAMURA Masao
    TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C, The Japan Society of Mechanical Engineers, 58(547) 870 - 875, 1992, Scientific journal
  • エンドミルの工具寿命に関する一考察
    新井 典久; 青山 栄一; 斉藤 親亮
    同志社大学理工学研究報告, 同志社大学理工学研究所, 32(1) p81 - 93, Apr. 1991
  • Force-Fitted Straight Bevel Gear. 1st Report, Stresses at the Tooth Root.
    ARAI Norihisa; AOYAMA Eiichi; SUGIMOTO Takatoshi; Zhou DAQING
    TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C, The Japan Society of Mechanical Engineers, 57(539) 2379 - 2384, 1991, Scientific journal
  • Determination of Rim Thickness and Interference for Force-Fitted Helical Gears.
    ARAI Norihisa; AOYAMA Eiichi; SUGIMOTO Takatoshi
    TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C, The Japan Society of Mechanical Engineers, 57(544) 3980 - 3985, 1991, Scientific journal
  • 圧入はすば歯車の設計法について
    新井 典久; 青山 栄一
    同志社大学理工学研究報告, 同志社大学理工学研究所, 31(3) p216 - 226, Oct. 1990
  • A Study on Force-Fitted Spur Gears in Consideration of Contact Condition : On the Internal Pressure at the Fitting Surface and Root Stress of Gear Tooth
    ARAI Norihisa; AOYAMA Eiichi; HARADA Susumu; OKAMOTO Muneji; TOYAO Tetsuya
    JSME international journal : bulletin of the JSME, The Japan Society of Mechanical Engineers, 30(262) 697 - 697, Apr. 1987
  • A study on graphical solution to determine the optimum interference at a fitting surface.
    ARAI Norihisa; AOYAMA Eiichi; HARADA Susumu; TOYAO Tetsuya; ASAOKA Yuuji
    TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C, The Japan Society of Mechanical Engineers, 53(489) 1083 - 1086, 1987, Scientific journal
  • STUDY ON FORCE-FITTED SPUR GEARS IN CONSIDERATION OF LOAD SHARING (ON THE METHOD OF DETERMINATION OF FITTING INTERFERENCE)
    N ARAI; E AOYAMA; S HRADA; N MORI; M OKAMOTO
    BULLETIN OF THE JSME-JAPAN SOCIETY OF MECHANICAL ENGINEERS, JAPAN SOC MECHANICAL ENGINEERS SANSHIN HOKUSEI BLDG, 29(255) 3157 - 3164, Sep. 1986, Scientific journal
  • Study on force-fitted spur gears in case when load distribution is considered (A study on the selecting method of interference at the fitting surfacs of force-fitted spur gear)
    ARAI Norihisa; AOYAMA Eiichi; HARADA Susumu; MORI Natsuhiko; OKAMOTO Muneji
    TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C, The Japan Society of Mechanical Engineers, 52(473) 105 - 112, 1986
  • 接触条件を考慮した圧入平歯車に関する研究(圧入面しめつけ内圧および歯元応力につい
    青山 栄一
    日本機械学会論文集(C編), 52(480), 1986
  • A study on force-fitted spur gears in consideration of contact condition (On the internal pressure at the fitting surface and root stress of gear tooth)
    ARAI Norihisa; AOYAMA Eiichi; HARADA Susumu; OKAMOTO Muneji; TOYAO Tetsuya
    TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C, The Japan Society of Mechanical Engineers, 52(480) 2187 - 2193, 1986, Scientific journal
  • ON THE CHARACTERISTICS OF CBN BITE IN THE CASE OF CUTTING OF HARDENING STEEL BY NC LATHE.
    Norihisa Arai; Yoshiaki Kitaguchi; Eiichi Aoyama; Noriya Fujii; Hideaki Kubota
    197 - 202, 1984, International conference proceedings
  • On the Stresses of Force-Fitted Gear and the Slipping at Force-Fitted Surface when the Influence of Centrifugal Force is considered
    ARAI Norihisa; AOYAMA Eiichi; KAWAKUBO Masahiro; HIRAI Mitomo; AIDA Toshio
    JSME international journal, The Japan Society of Mechanical Engineers, 25(208) 1618 - 1626, 1982, Scientific journal
  • On Stresses at Any Part and Slipping at Fitting Surface of Force-Fitted Gear Taking Account of Centrifugal Force
    ARAI Norihisa; AOYAMA Eiichi; KAWAKUBO Masahiro; HIRAI Mitomo; AIDA Toshio
    TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C, The Japan Society of Mechanical Engineers, 48(426) 248 - 256, 1982

MISC

  • Knowledge exploration of microdrill catalog database based on clustering
    野原嘉人; 廣垣俊樹; 青山栄一; 児玉紘幸
    砥粒加工学会誌, 66(7), 2022
  • 差動遊星歯車機構の応答特性のシミュレーション方法の考察
    男谷和俊; 浜田征哉; 廣垣俊樹; 青山栄一; 中川正夫
    精密工学会大会学術講演会講演論文集, 2021, 2021
  • 差動遊星歯車機構のねじり振動に公転成分の支持剛性が及ぼす影響
    浜田征哉; 男谷和俊; 福田知樹; 中川正夫; 廣垣俊樹; 青山栄一
    精密工学会大会学術講演会講演論文集, 2020, 2020
  • Identification Method of Moment of Inertia for Dynamic Modelling of Differential Planetary Gear Train
    男谷和俊; 浜田征哉; 福田知樹; 中川正夫; 廣垣俊樹; 青山栄一
    日本機械学会年次大会講演論文集(CD-ROM), 2020, 2020
  • プリント基板のレーザーバイアホール形成--ドライプロセス化を目指したCuダイレクト加工方法
    廣垣 俊樹; 青山 栄一; 小川 圭二
    光アライアンス, 日本工業出版, 19(1) 53 - 57,63, Jan. 2008
  • 537 Teeth Strength Properties of FRP Gears produced by Hob Cut
    AOYAMA Eiichi; HIROGAKI Toshiki; SUGIMURA Kazuya; ISE Tetsurou; HARA Eiji; YAGURA Yoshinori; AOYAMA Haruka
    学術講演会講演論文集, 日本材料学会, 54 403 - 404, 2005
  • 318 Application of GFRP Plate to Build-up Layer of Multi Layer Printed Wiring Boards for Cu Direct Blind Via Hole Drilling using CO_2 Laser
    OGAWA Keiji; HIROGAKI Toshiki; AOYAMA Eiichi; DOI Nobuyuki
    学術講演会講演論文集, 日本材料学会, 54 96 - 97, 2005
  • 317 Factor analysis of quality of micro-drilling hole in multilayer PWB that uses data mining
    HIROGAKI Toshiki; AOYAMA Eiichi; OGAWA Keiji; MORI Keniti; SHINDO Rikima
    学術講演会講演論文集, 日本材料学会, 54 94 - 95, 2005
  • 628 Manufacturing and Controlling of Bamboo Fibers Obtained with a Machining Center
    TOMIOKA Yoshihiro; AOYAMA Eiichi; HIROGAKI Toshiki; OGAWA Keiji; SHIOMI Tomohiro
    学術講演会講演論文集, 日本材料学会, 54 431 - 432, 2005
  • Estimating System of Gear Noise using Thermography
    UENISHI Yasuhiro; NAKANO Yuusuke; TANGE Hiromi; HIROGAKI Toshiki; AOYAMA Eiichi; KATAYAMA Tsutao
    東海支部地区講演会講演論文集, 日本機械学会東海支部, 2003 184 - 185, 2003
  • 607 FRP歯車における設計システムの開発 : 積層材料を用いた歯車における曲げ疲労強度の算定(破壊と破壊力学-I)(複合材料の産業応用)(オーガナイスドセッション6)
    青山 栄一; 片山 傅生; 廣垣 俊樹; 杉村 和哉; 矢倉 吉典
    学術講演会講演論文集, 日本材料学会, 52 165 - 166, 2003
  • 205 人工膝関節用超高分子量ポリエチレンのデラミネーション破壊に及ぼす諸因子の影響
    山本 浩司; 富田 直秀; 御守 直樹; 柴田 延幸; 青山 栄一; 片山 傅生
    学術講演会講演論文集, 日本材料学会, 49 41 - 42, 2000
  • 504 レーザを用いたプリント基板の小径ブラインドホール加工 : アラミドおよびガラス不織布強化基板の比較
    廣垣 俊樹; 井上 久弘; 青山 栄一; 野辺 弘道; 小川 圭二; 前田 伸治; 片山 傳生
    学術講演会講演論文集, 日本材料学会, 47 159 - 160, 1998
  • 110 プリント基板用 GFRP 積層材の小径ドリル加工時の損傷幅に対する要因
    奥野 泰和; 青山 栄一; 廣垣 俊樹; 井上 久弘; 野辺 弘道; 郡嶋 宗久; 片山 傳生
    学術講演会講演論文集, 日本材料学会, 46 19 - 20, 1997
  • 111 プリント基板用 GFRP 積層材の小径ドリル加工時の損傷評価とその対策
    野辺 弘道; 青山 栄一; 廣垣 俊樹; 片山 傳生
    学術講演会講演論文集, 日本材料学会, 46 21 - 22, 1997

Books etc

  • 先進複合材料の開発とその応用 : 先端複合材料技術による自動車開発 : 平成19年度〜平成23年度私立大学学術研究高度化推進事業ハイテク・リサーチ・センター整備事業研究成果報告書
    青山, 栄一; 同志社; 同志社大学複合材料研究センター
    同志社,同志社大学複合材料研究センター, May 2012
  • 材料加工学
    澤井, 猛; 廣垣, 俊樹; 塩田, 康友; 恩地, 好晶; 青山, 栄一; 桜井, 恵三; 足立, 勝重; 小川, 恒一
    朝倉書店, Apr. 2009
  • 材料加工学-高温加工編-
    青山 栄一
    槙書店, 1994, Scholarly book

Presentations

  • 差動遊星歯車機構の応答特性のシミュレーション方法の考察
    男谷和俊; 浜田征哉; 廣垣俊樹; 青山栄一; 中川正夫
    精密工学会大会学術講演会講演論文集, 2021, 2021, 2021
  • 5軸制御マシニングセンタによる切削点送り速度ベクトル一定化における加工現象の考察
    岩間翔哉; 廣垣俊樹; 青山栄一; 鈴木尊丸
    精密工学会大会学術講演会講演論文集, 2020, 2020, 2020
  • 5軸制御マシニングセンタでのエンドミル切削点送り速度ベクトル一定化の効果法の検討
    岩間翔哉; 鈴木尊丸; 廣垣俊樹; 青山栄一; 山口陽平; 池上貴一
    精密工学会大会学術講演会講演論文集, 2020, 2020, 2020
  • Investigation on machining accuracy with wireless tool holder under constant feed speed at milling point with a five axis controlled machining center considering approach path
    SUZUKI Takamaru; IWAMA Shoya; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of Mechanical Engineering Congress, Japan, 2020, 2020, 2020, The Japan Society of Mechanical Engineers
  • Identification Method of Moment of Inertia for Dynamic Modelling of Differential Planetary Gear Train
    男谷和俊; 浜田征哉; 福田知樹; 中川正夫; 廣垣俊樹; 青山栄一
    日本機械学会年次大会講演論文集(CD-ROM), 2020, 2020, 2020
  • 差動遊星歯車機構のねじり振動に公転成分の支持剛性が及ぼす影響
    浜田征哉; 男谷和俊; 福田知樹; 中川正夫; 廣垣俊樹; 青山栄一
    精密工学会大会学術講演会講演論文集, 2020, 2020, 2020
  • 5軸制御マシニングセンタでの切削点送り速度ベクトル一定化のための工具アプローチ方法の検討
    岩間翔哉; 鈴木尊丸; 廣垣俊樹; 青山栄一; 山口陽平; 池上貴一
    精密工学会関西地方定期学術講演会講演論文集, 2019, 2019, 2019
  • Investigation of Sound Absorption Characteristics Based on Biot Parameter of Polypropylene Nanofiber Nonwoven Fabric
    URABE Kenichi; WU Wei; HIROGAKI Toshiki; AOYAMA Eiichi; SOTA Hiroyoshi
    The Proceedings of Conference of Kansai Branch, 2019, 2019, 2019, The Japan Society of Mechanical Engineers
  • Monitoring of Processing Vibration Characteristic of Rotating Machining Tool with a Wireless Tool Holder System
    YAMAMOTO Takamasa; MATSUDA Ryo; SHINDOU Masatoshi; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of Conference of Kansai Branch, 2019, 2019, 2019, The Japan Society of Mechanical Engineers
  • Three-dimensional deformation of laser quenching forming and its prediction and control method
    NISHIDA Hiromichi
    The Proceedings of Conference of Kansai Branch, 2019, 2019, 2019, The Japan Society of Mechanical Engineers
  • Development of In-situ heat treatment method for thin-wall cylindrical workpieces on a turning center
    SHINKAI Yohei; KONDO Masaki; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of Conference of Kansai Branch, 2019, 2019, 2019, The Japan Society of Mechanical Engineers
  • Consideration of thread cutting method for helical interpolation of hardened steel by thread mill using servo information
    MATSUI Shota; Ozaki Nobutoshi; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of Conference of Kansai Branch, 2019, 2019, 2019, The Japan Society of Mechanical Engineers
  • Consideration of Bending Stress in Curved Tooth of Small Size and High Strength Spiral Bevel Gear Fabricated by Five Axis Controlled Machining Center
    TOYOTA Shinya; SAITO Masahiro; SHIBATA Takashi; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of Conference of Kansai Branch, 2019, 2019, 2019, The Japan Society of Mechanical Engineers
  • Investigation of Magnetic Paste Performance with Magnetic Polishing Method Using Rotational Permanent Magnet Tool
    XIANG Fei; WU Wei; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of Conference of Kansai Branch, 2019, 2019, 2019, The Japan Society of Mechanical Engineers
  • 弾性ヒンジのレーザ焼入れフォーミングに関する研究
    真鍋 裕輝; 西田 大陸; 廣垣 俊樹; 青山 栄一; 小川 圭二
    精密工学会学術講演会講演論文集, 2019, 2019, 2019, 公益社団法人 精密工学会
  • Investigation of rotary transient response on differential planetary gear train by monitoring with high-speed camera
    Fukuda Tomoki; Nakagawa Masao; Hirogaki Toshiki; Aoyama Eiichi
    Proceedings of JSPE Semestrial Meeting, 2019, 2019, 2019, The Japan Society for Precision Engineering
  • 波動歯車減速機を搭載したコンパクト5軸制御工作機械の消費電力特性の研究
    岡田 泰周; 廣垣 俊樹; 青山 栄一
    精密工学会学術講演会講演論文集, 2019, 2019, 2019, 公益社団法人 精密工学会
  • ポリプロピレンナノファイバー不織布の空気フィルター特性の予測
    呉 魏; 卜部 賢一; 廣垣 俊樹; 青山 栄一; 曽田 浩義
    精密工学会学術講演会講演論文集, 2019, 2019, 2019, 公益社団法人 精密工学会
  • Study on Smart Diagnosis of Chatter Mark Image of End Milled Surface
    Ozaki Nobutoshi; Matsui Syota; Hirogaki Toshiki; Aoyama Eiichi
    Proceedings of JSPE Semestrial Meeting, 2019, 2019, 2019, The Japan Society for Precision Engineering
  • ベイジアンネットワークに基づく工具カタログデータマイニング
    山田 航太郎; 佐久間 大志; 廣垣 俊樹; 青山 栄一; 児玉 紘幸
    精密工学会学術講演会講演論文集, 2019, 2019, 2019, 公益社団法人 精密工学会
  • スレッドミルによる焼入れ鋼のヘリカル補間ねじ切り加工法
    松井 翔太; 尾崎 信利; 廣垣 俊樹; 青山 栄一
    精密工学会学術講演会講演論文集, 2019, 2019, 2019, 公益社団法人 精密工学会
  • Investigation of Cutting Phenomena in Screw Cutting by Three Axis Controlling Helical Interpolate Motion
    MATSUI Shota; AOTANI Kaito; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of Conference of Kansai Branch, 2018, 2018, 2018, The Japan Society of Mechanical Engineers
  • Data mining from tool catalog introducing machine learning method
    SAKUMA Taishi; YAMADA Kotaro; HIROGAKI Toshiki; AOYAMA Eiichi; KODAMA Hiroyuki
    The Proceedings of The Manufacturing & Machine Tool Conference, 2018, 2018, 2018, The Japan Society of Mechanical Engineers
  • Investigation of data-mining method by using micro-drill catalogs for Printed Circuit Boards
    HIGUCHI Hirokazu; Amelie JANOT Claire; HIROGAKI Toshiki; AOYAMA Eiichi; KODAMA Hiroyuki
    The Proceedings of The Manufacturing & Machine Tool Conference, 2018, 2018, 2018, The Japan Society of Mechanical Engineers
  • Consideration of End Milling by Cutting Speed Feed Velocity Vector Constant Control Method
    YOSHIKAWA Kazuki; SUZUKI Takamaru; HIROGAKI Toshiki; AOYAMA Eiichi; AKAI Takayuki; IKEGAMI Takakazu
    The Proceedings of The Manufacturing & Machine Tool Conference, 2018, 2018, 2018, The Japan Society of Mechanical Engineers
  • Cutting-trace shape control of machined surface using radius end mill based on the estimation of internal servo information
    Uenoyama Masahiro; Hirogaki Toshiki; Aoyama Eiichi
    The Proceedings of The Manufacturing & Machine Tool Conference, 2018, 2018, 2018, The Japan Society of Mechanical Engineers
  • Improvement of Thread Mill Threading Processing Accuracy by Helical Interpolation Motion
    MATSUI Shota; OZAKI Nobutoshi; HIROGAKI Toshiki; AOYAMA Eiichi; SHINDO Masatoshi
    The Proceedings of Mechanical Engineering Congress, Japan, 2018, 2018, 2018, The Japan Society of Mechanical Engineers
  • The Property of the CFRP Machined Surface by Switching Rotational Direction Using cBN Electroplated End-mill
    KOMETANI Ruriko; AOYAMA Eiichi; HIROGAKI Toshiki; FURUKI Tatsuya; INABA Kiyofumi; FUJIWARA Kazuna
    The Proceedings of Mechanical Engineering Congress, Japan, 2018, 2018, 2018, The Japan Society of Mechanical Engineers
  • プラネットギヤの歯面精度が差動遊星歯車機構の騒音に与える影響に関する研究
    中川 正夫; 福田 知樹; 松井 翔太; 廣垣 俊樹; 青山 栄一
    精密工学会学術講演会講演論文集, 2018, 2018, 2018, 公益社団法人 精密工学会
  • Consideration of Optimizing Rib Sharp for Small Size and High Strength Spiral Bevel Gear Fabricated by Five Axis Controlled Machining Center
    TOYOTA Shinya; SAITO Masahiro; SHIBATA Takashi; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of Conference of Kansai Branch, 2018, 2018, 2018, The Japan Society of Mechanical Engineers
  • Investigation of Production of Nano Fiber Non-woven Fabric and Its Oil adsorption and filtration characteristics
    WU Wei; HIROGAKI Toshiki; AOYAMA Eiichi; URABE Kenichi; IKEGAYA Morihiko; SOTA Hiroyoshi
    The Proceedings of Conference of Kansai Branch, 2018, 2018, 2018, The Japan Society of Mechanical Engineers
  • Investigation of Production of Nano Fiber Non-woven Fabric and its Thermal Property
    URABE Kenichi; HIROGAKI Toshiki; AOYAMA Eiichi; WU Wei; IKEGAYA Morihiko; SOTA Hiroyoshi
    The Proceedings of Conference of Kansai Branch, 2018, 2018, 2018, The Japan Society of Mechanical Engineers
  • 産業用ロボットの現場における位置姿勢補正のためのリンク長さ同定法の検討
    山内 徹治; 廣垣 俊樹; 青山 栄一; 高橋 賢一
    精密工学会学術講演会講演論文集, 2018, 2018, 2018, 公益社団法人 精密工学会
  • タクシー型AGV搬送制御におけるネットワークボロノイ図を用いたコース形状の定量化
    小林 謙介; 高橋 藤也; 廣垣 俊樹; 青山 栄一; 小川 圭二
    精密工学会学術講演会講演論文集, 2018, 2018, 2018, 公益社団法人 精密工学会
  • Study on musical scale tuning of musical saw using industrial humanoid robot
    Fuke Yusuke; Kobayashi Asuka; Hirogaki Toshiki; Aoyama Eiichi
    Proceedings of JSPE Semestrial Meeting, 2018, 2018, 2018, The Japan Society for Precision Engineering
  • Vibration reduction effect of counter balance feed mechanism by right and left ball screw drive and guidelines for the design method of this mechanism
    Kawazoe Yuya; Hirogaki Toshiki; Aoyama Eiichi
    Proceedings of JSPE Semestrial Meeting, 2018, 2018, 2018, The Japan Society for Precision Engineering
  • 遊星歯車機構の機械式無段変速の高ギア比化とかみあい騒音低減に関する研究
    中川 正夫; 西田 大; 廣垣 俊樹; 青山 栄一
    精密工学会学術講演会講演論文集, 2018, 2018, 2018, 公益社団法人 精密工学会
  • アイドリングストップ機能付き工作機械の運動精度に関する考察
    尾崎 時矢; 廣垣 俊樹; 青山 栄一
    精密工学会学術講演会講演論文集, 2018, 2018, 2018, 公益社団法人 精密工学会
  • Consideration of machining accuracy of end mill machining with cutting point feed speed vector fixed by 5-axis control machine tool
    Yoshikawa Kazuki; Suzuki Takamaru; Hirogaki Toshiki; Aoyama Eiichi; Shinkai Yohei; Akai Takayuki; Ikegami Takakazu
    Proceedings of JSPE Semestrial Meeting, 2018, 2018, 2018, The Japan Society for Precision Engineering
  • 完全資源循環型の竹繊維歯車の歯元ひずみ計測に基づくかみあい基本特性の考察
    柳川 貴之; 青山 栄一; 廣垣 俊樹; 松井 翔太; 野辺 弘道; 小川 圭二
    精密工学会学術講演会講演論文集, 2018, 2018, 2018, 公益社団法人 精密工学会
  • Proposal of tool catalog data mining process introducing machine learning method
    Sakuma Taishi; Hirogaki Toshiki; Aoyama Eiichi; Kodama Hiroyuki
    Proceedings of JSPE Semestrial Meeting, 2018, 2018, 2018, The Japan Society for Precision Engineering
  • レーザ焼入れフォーミング法における残留応力の評価に関する考察
    真鍋 裕輝; 西田 大陸; 廣垣 俊樹; 青山 栄一; 小川 圭二
    精密工学会学術講演会講演論文集, 2018, 2018, 2018, 公益社団法人 精密工学会
  • High speed video monitor by two-color method of laser via hole processing of printed circuit board
    YAMAGUCHI Ryuta; KANKI Koji; HIROGAKI Toshiki; AOYAMA Eiichi; OGAWA Keiji
    The Proceedings of The Manufacturing & Machine Tool Conference, 2018, 2018, 2018, The Japan Society of Mechanical Engineers
  • Consideration of Rotation Direction Vibration of Natural Fiber Gears Made from Only Bamboo Fibers Extracted with a Machining Center
    Yanagawa Takayuki; Hirogaki Toshiki; Aoyama Eiichi; Matsui Shota; Ogawa Keiji; Nobe Hiromichi
    The Proceedings of The Manufacturing & Machine Tool Conference, 2018, 2018, 2018, The Japan Society of Mechanical Engineers
  • Basic study for three-dimensional molding of bamboo fiber extracted using machining center
    FUJIMOTO Takuya; BIGEARD Antoine; HIROGAKI Toshiki; AOYAMA Eiichi; OGAWA Keiji; NOBE Hiromichi
    The Proceedings of The Manufacturing & Machine Tool Conference, 2018, 2018, 2018, The Japan Society of Mechanical Engineers
  • Monitoring of countersinking processes with a multi-functional wireless tool holder system
    SHINDOU Masatoshi; MATSUDA Ryo; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of The Manufacturing & Machine Tool Conference, 2018, 2018, 2018, The Japan Society of Mechanical Engineers
  • Investigation of State Estimation Method by Image Processing of Chatter Surface Pattern in End Mill Cutting
    OZAKI Nobutoshi; MATSUI Shota; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of The Manufacturing & Machine Tool Conference, 2018, 2018, 2018, The Japan Society of Mechanical Engineers
  • Study on vibration reduction effect of counter-balance feed drive with right and left ball screw
    KAWAZOE Yuya; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of The Manufacturing & Machine Tool Conference, 2018, 2018, 2018, The Japan Society of Mechanical Engineers
  • Examination of tuning and performance behavior of musical saw by industrial humanoid robot
    Mishima Akira; Fuke Yusuke; Hirogaki Toshiki; Aoyama Eiichi
    The Proceedings of The Manufacturing & Machine Tool Conference, 2018, 2018, 2018, The Japan Society of Mechanical Engineers
  • Consideration of arrangement method and operation of two articulated robots based on torque margin method
    Murano Tetsuya; Hervas Carmen; kadoya Takuya; Hirogaki Toshiki; Aoyama Eiichi
    The Proceedings of The Manufacturing & Machine Tool Conference, 2018, 2018, 2018, The Japan Society of Mechanical Engineers
  • Position Correction Method Based on Servo Information of Large Robot for Piping Manufacturing System
    YAMAUCHI Tetsuji; TAKAHASHI Kenichi; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of The Manufacturing & Machine Tool Conference, 2018, 2018, 2018, The Japan Society of Mechanical Engineers
  • Consideration of the Lissajous trajectory of the ball by the plate control of the industrial dual arm robot
    Nakamura Masatoshi; Mizutani Yuta; Go Gi; Hirogaki Toshiki; Aoyama Eiichi
    The Proceedings of The Manufacturing & Machine Tool Conference, 2018, 2018, 2018, The Japan Society of Mechanical Engineers
  • 5軸制御工作機械におけるエンドミル切削点送り速度ベクトル一定化の旋回軸と直進軸の運動制御法の検討
    吉川和輝; 鈴木尊丸; 廣垣俊樹; 青山栄一; 新海洋平; 赤井孝行; 池上貴一
    精密工学会関西地方定期学術講演会講演論文集, 2017, 2017, 2017
  • Monitoring of Processing Phenomenon of Rotating Machining Tool with a Wireless Multifunctional Tool Holder System
    MATSUDA Ryo; SHINDOU Masatoshi; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of Conference of Kansai Branch, 2017, 2017, 2017, The Japan Society of Mechanical Engineers
  • Study on performance of end-mill type magnetic polishing tool with different magnetic media
    Ma Lei; YAGUCHI Wataru; AOYAMA Eiichi; HIROGAKI Toshiki
    The Proceedings of Conference of Kansai Branch, 2017, 2017, 2017, The Japan Society of Mechanical Engineers
  • Investigation of Force Monitoring in Screw Cutting by Three Axis Controlling Helical Interpolate Motion
    MATSUI Shota; AOTANI Kaito; KABAYA Yugo; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of Conference of Kansai Branch, 2017, 2017, 2017, The Japan Society of Mechanical Engineers
  • Study on designing a synchronous motor for a spindle axis of machine tools
    IKEGAMI Takakazu; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of Conference of Kansai Branch, 2017, 2017, 2017, The Japan Society of Mechanical Engineers
  • Investigation of Rib Sharp for Small Size and High Strength Spiral Bevel Gear Fabricated by Five Axis Controlled Machining Center
    TOYOTA Shinya; SHIBATA Takashi; SAITO Masahiro; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of Conference of Kansai Branch, 2017, 2017, 2017, The Japan Society of Mechanical Engineers
  • Investigation of Production of Nano Fiber Non-woven Fabric and Its Base Features for Applications
    WU Wei; AOYAMA Eiichi; HIROGAKI Toshiki; IKEGAYA Morihiko; ECHIZENYA Takatsugu; SOTA Hiroyoshi
    The Proceedings of Conference of Kansai Branch, 2017, 2017, 2017, The Japan Society of Mechanical Engineers
  • CBN電着エンドミル工具を用いたCFRP側面切削時の現象の考察
    米谷 瑠里子; 廣垣 俊樹; 青山 栄一; 古木 辰也; 稲葉 清文; 藤原 和納
    精密工学会学術講演会講演論文集, 2017, 2017, 2017, 公益社団法人 精密工学会
  • 高速度ビデオモニタに基づく3軸駆動遊星歯車機構のプラネットギアのセントロードの解明
    中川 正夫; 西田 大; 福田 知樹; 廣垣 俊樹; 青山 栄一; 松井 翔太
    精密工学会学術講演会講演論文集, 2017, 2017, 2017, 公益社団法人 精密工学会
  • ナノファイバー不織布の製造とその吸着と吸音特性の考察
    呉 魏; 青山 栄一; 廣垣 俊樹; 池ヶ谷 守彦; 越前谷 孝嗣; 曽田 浩義
    精密工学会学術講演会講演論文集, 2017, 2017, 2017, 公益社団法人 精密工学会
  • Proposal of tool catalog mining process introducing Maximal Information Coefficient (MIC) and knowledge discovery
    Sakuma Taishi; Hirogaki Toshiki; Aoyama Eiichi; Kodama Hiroyuki
    Proceedings of JSPE Semestrial Meeting, 2017, 2017, 2017, The Japan Society for Precision Engineering
  • コンパクト5軸制御工作機械のサーボ内部情報からの駆動部の消費電力モニタに基づく考察
    藤村 拓実; 廣垣 俊樹; 青山 栄一
    精密工学会学術講演会講演論文集, 2017, 2017, 2017, 公益社団法人 精密工学会
  • 5軸制御マシニングセンタで創成する小型高強度ベベルギヤのリブ形状最適化の考察
    豊田 真也; 柴田 高志; 齊藤 雅博; 廣垣 俊樹; 青山 栄一
    精密工学会学術講演会講演論文集, 2017, 2017, 2017, 公益社団法人 精密工学会
  • タクシー型AGV制御におけるコース形状の定量化
    高橋 藤也; 小林 謙介; 廣垣 俊樹; 青山 栄一; 小川 圭二
    精密工学会学術講演会講演論文集, 2017, 2017, 2017, 公益社団法人 精密工学会
  • 双腕ロボットのプレート操り動作によるボールのリサージュ転がり軌跡を用いた運動誤差の診断
    水谷 優太; 呉 魏; 廣垣 俊樹; 青山 栄一
    精密工学会学術講演会講演論文集, 2017, 2017, 2017, 公益社団法人 精密工学会
  • モータトルク余裕度法に基づく2台の多関節ロボットの配置方法および可操作性による考察
    角谷 拓也; 廣垣 俊樹; 青山 栄一
    精密工学会学術講演会講演論文集, 2017, 2017, 2017, 公益社団法人 精密工学会
  • エンドミルびびり振動時の工具軌跡と加工面模様モニタに基づく振動抑制方法の考察
    青谷 凱斗; 廣垣 俊樹; 青山 栄一
    精密工学会学術講演会講演論文集, 2017, 2017, 2017, 公益社団法人 精密工学会
  • Elucidation of fundamental characteristics of counter balance damping system by right and left ball screw drive
    Kawazoe Yuya; Hirogaki Toshiki; Aoyama Eiichi
    Proceedings of JSPE Semestrial Meeting, 2017, 2017, 2017, The Japan Society for Precision Engineering
  • Development of on-board heat treatment method using laser in turning center
    Shinkai Yohei; Kondo Masaki; Hirogaki Toshiki; Aoyama Eiichi
    Proceedings of JSPE Semestrial Meeting, 2017, 2017, 2017, The Japan Society for Precision Engineering
  • A study on Control method of cutting trace pattern in radius end mill R part processing by 5 axis controlled machine tools
    Uenoyama Masahiro; Nakamura Seigo; Hirogaki Toshiki; Aoyama Eiichi
    Proceedings of JSPE Semestrial Meeting, 2017, 2017, 2017, The Japan Society for Precision Engineering
  • Fabrication of hemispherical shell-shape products from a binder-free green composite using bamboo fibers and powders extracted with a machining center
    Inoue Kota; Bigeard Antoine; Hirogaki Toshiki; Aoyama Eiichi; Ogawa Keiji; Nobe Hiromichi
    Proceedings of JSPE Semestrial Meeting, 2017, 2017, 2017, The Japan Society for Precision Engineering
  • マシニングセンタを用いたヘリカル補間運動に基づくネジ切り加工の高精度化の検討
    松井 翔太; 青谷 凱斗; 廣垣 俊樹; 青山 栄一
    精密工学会学術講演会講演論文集, 2017, 2017, 2017, 公益社団法人 精密工学会
  • マシニングセンタで抽出された竹繊維を用いたグリーン球殻製品の創成の考察
    井上 興太; Bigeard Antoine; 廣垣 俊樹; 青山 栄一; 小川 圭二
    精密工学会学術講演会講演論文集, 2017, 2017, 2017, 公益社団法人 精密工学会
  • エンドミル加工面の逆解析に基づくびびり振動の抑制法
    青谷 凱斗; 廣垣 俊樹; 青山 栄一
    精密工学会学術講演会講演論文集, 2017, 2017, 2017, 公益社団法人 精密工学会
  • 双腕ロボットのプレート操り動作によるボールのリサージュ転がり運動の考察
    水谷 優太; 呉 魏; 廣垣 俊樹; 青山 栄一
    精密工学会学術講演会講演論文集, 2017, 2017, 2017, 公益社団法人 精密工学会
  • 3軸駆動制御を導入した2K-H型とDA型遊星歯車機構の実験的考察
    中川 正夫; 西田 大; サー ディパク; 廣垣 俊樹; 青山 栄一
    精密工学会学術講演会講演論文集, 2017, 2017, 2017, 公益社団法人 精密工学会
  • 可操作度も考慮したモータトルク余裕度法に基づく2台の多関節ロボットの配置法
    角谷 拓也; 廣垣 俊樹; 青山 栄一
    精密工学会学術講演会講演論文集, 2017, 2017, 2017, 公益社団法人 精密工学会
  • Magnetic Polishing of Ti-alloy with Machining Center
    Furuki Tatsuya; Kataoka Kouki; Hirogaki Toshiki; Aoyama Eiichi
    Proceedings of JSPE Semestrial Meeting, 2017, 2017, 2017, The Japan Society for Precision Engineering
  • 薄鋼板のレーザ焼入れフォーミング法におけるレーザ照射条件の検討
    真鍋 裕輝; 織田 良輔; 廣田 知直; 廣垣 俊樹; 青山 栄一; 小川 圭二
    精密工学会学術講演会講演論文集, 2017, 2017, 2017, 公益社団法人 精密工学会
  • Study on condition setting of micro-drill catalogs for PCBs by using data-mining method
    TABATA Shogo; HIROGAKI Toshiki; AOYAMA Eiichi; KODAMA Hiroyuki
    The Proceedings of The Manufacturing & Machine Tool Conference, 2016, 2016, 2016, The Japan Society of Mechanical Engineers
  • Quantification of the course shape by the homology in AGV transportation system based on knowledge of taxis.
    TAKAHASHI Toya; HIROGAKI Toshiki; AOYAMA Eiichi; UESAKI Daiki; OGAWA Keiji
    The Proceedings of The Manufacturing & Machine Tool Conference, 2016, 2016, 2016, The Japan Society of Mechanical Engineers
  • Characteristic of the machine tool having right and left ball screw counter balance forwarding drive system and micro drilling
    KISHIMOTO Masahiro; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of The Manufacturing & Machine Tool Conference, 2016, 2016, 2016, The Japan Society of Mechanical Engineers
  • Discussion and observation of meshing condition of bamboo gear made from only bamboo fiber extracted by machining center.
    Hashimoto Atsushi; Rona Maxime; Hirogaki Toshiki; Aoyama Eiichi; Ogawa Keiji; Hiromichi Nobe
    The Proceedings of The Manufacturing & Machine Tool Conference, 2016, 2016, 2016, The Japan Society of Mechanical Engineers
  • Study on processing method to save the energy consumption with 5-axis controlled compact machine tool which has idling reduction system.
    Ota Ryo; AOYAMA Eiichi; HIROGAKI Toshiki
    The Proceedings of The Manufacturing & Machine Tool Conference, 2016, 2016, 2016, The Japan Society of Mechanical Engineers
  • Investigation of instantaneous rotation center and inertia of planet gear based on the mechanism in the three-axis driving planetary gear train
    NAKAGAWA Masao; NISHIDA Dai; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of the Machine Design and Tribology Division meeting in JSME, 2016, 2016, 2016, The Japan Society of Mechanical Engineers
  • Investigation of dynamic characteristic under three-axis transition on the planetary gear train based on the sun gear speed contour map.
    NISHIDA Dai; HIROGAKI Toshiki; AOYAMA Eiichi; NAKAGAWA Masao
    The Proceedings of the Machine Design and Tribology Division meeting in JSME, 2016, 2016, 2016, The Japan Society of Mechanical Engineers
  • 磁力に基づく自律的変形工具の開発とその性能の考察
    矢口 航; 馬 雷; 古木 辰也; 廣垣 俊樹; 青山 栄一
    精密工学会学術講演会講演論文集, 2016, 2016, 2016, 公益社団法人 精密工学会
  • 工作機械における左右ボールねじ機構の制振効果とマイクロドリル加工動作への適用
    岸本 昌大; 廣垣 俊樹; 青山 栄一; 山下 竜弥; 小川 圭二
    精密工学会学術講演会講演論文集, 2016, 2016, 2016, 公益社団法人 精密工学会
  • アリコロニーの概念を導入したタクシー型AGV搬送制御に関する研究
    植崎 大樹; 廣垣 俊樹; 青山 栄一; 鈴木 二仁; 小川 圭二
    精密工学会学術講演会講演論文集, 2016, 2016, 2016, 公益社団法人 精密工学会
  • 産業用ロボットのレーザートラッカー計測に基づく運動精度の補正法に関する研究
    山内 翔貴; 畔柳 草介; 廣垣 俊樹; 青山 栄一; 森 浩一; 高橋 賢一; 古田 雅樹
    精密工学会学術講演会講演論文集, 2016, 2016, 2016, 公益社団法人 精密工学会
  • Mirror surface characteristics evaluation of surface processed by radius end mill with 5 axis control machine tools
    Nakamura Seigo; Hirogaki Toshiki; Aoyama Eiichi
    Proceedings of JSPE Semestrial Meeting, 2016, 2016, 2016, The Japan Society for Precision Engineering
  • Influence of cBN electroplated end-mill shape on CFRP machining
    Furuki Tatsuya; Kabaya Yugo; Hirogaki Toshiki; Aoyama Eiichi; Ogawa Keiji; Inaba Kiyofumi; Fujiwara Kazuna
    Proceedings of JSPE Semestrial Meeting, 2016, 2016, 2016, The Japan Society for Precision Engineering
  • 綿状ナノファイバーの製造法とその応用に関する研究
    呉 魏; 青山 栄一; 廣垣 俊樹; 池ヶ谷 守彦; 越前谷 孝嗣; 曽田 浩義
    精密工学会学術講演会講演論文集, 2016, 2016, 2016, 公益社団法人 精密工学会
  • 遊星歯車機構の3軸駆動時の遊星歯車セントロードの考察
    中川 正夫; 西田 大; 廣垣 俊樹; 青山 栄一
    精密工学会学術講演会講演論文集, 2016, 2016, 2016, 公益社団法人 精密工学会
  • アイドリングストップサーボ系を有する5軸制御工作機械の省電力加工に関する研究
    太田 諒; 廣垣 俊樹; 青山 栄一
    精密工学会学術講演会講演論文集, 2016, 2016, 2016, 公益社団法人 精密工学会
  • Data mining about the radius end mill in catalog data.
    Kubo Kengo; Hirogaki Toshiki; Aoyama Eiichi; Kodama Hiroyuki
    Proceedings of JSPE Semestrial Meeting, 2016, 2016, 2016, The Japan Society for Precision Engineering
  • 綿状ナノファイバーの製造とその超精密研磨加工への応用
    呉 魏; 青山 栄一; 廣垣 俊樹; 池ヶ谷 守彦; 越前谷 孝嗣; 曽田 浩義
    精密工学会学術講演会講演論文集, 2016, 2016, 2016, 公益社団法人 精密工学会
  • Improving Method of Synchronizing Motion Accuracy of Rotary Axes and Linear Axis under a Constant Feed Speed Vector of Endmilling Point
    Suzuki Takamaru; Hirogaki Toshiki; Aoyama Eiichi; Akai Takayuki; Ikegami Takakazu
    Proceedings of JSPE Semestrial Meeting, 2016, 2016, 2016, The Japan Society for Precision Engineering
  • ボンドグラフを用いた遊星歯車機構のかみあい剛性と減衰率の考察
    中川 正夫; 西田 大; Sah Deepak; 廣垣 俊樹; 青山 栄一
    精密工学会学術講演会講演論文集, 2016, 2016, 2016, 公益社団法人 精密工学会
  • サーモグラフィ画像と熱回路網モデルを用いたハイポイドギヤのかみ合い解析法
    鈴木 光彦; 廣垣 俊樹; 青山 栄一
    精密工学会学術講演会講演論文集, 2016, 2016, 2016, 公益社団法人 精密工学会
  • Development of cBN electroplated end-mill for CFRP processing
    Kabaya Yugo; Hirogaki Toshiki; Aoyama Eiichi; Furuki Tatsuya; Ogawa Keiji; Inaba Kiyofumi; Fujiwara Kazuna
    Proceedings of JSPE Semestrial Meeting, 2016, 2016, 2016, The Japan Society for Precision Engineering
  • ヒューマノイドロボットと弾性ばちが協調した打撃動作と打撃音の考察
    小林 飛翔; 鈴木 寛典; 廣垣 俊樹; 青山 栄一
    精密工学会学術講演会講演論文集, 2016, 2016, 2016, 公益社団法人 精密工学会
  • 双腕ロボットのプレート操り運動によるボールの八の字転がり制御の考察
    水谷 優太; 呉 魏; 廣垣 俊樹; 青山 栄一
    精密工学会学術講演会講演論文集, 2016, 2016, 2016, 公益社団法人 精密工学会
  • モータトルク余裕度に基づく2台の多関節ロボットの配置法の考察
    角谷 拓也; 廣垣 俊樹; 青山 栄一
    精密工学会学術講演会講演論文集, 2016, 2016, 2016, 公益社団法人 精密工学会
  • P076 Investigation of Relationship between Rotational Speed and its Direction under Three-axis Driving Planetary Gear Set
    NISHIDA Dai; HIROGAKI Toshiki; AOYAMA Eiichi; NAKAGAWA Masao
    The Proceedings of Conference of Kansai Branch, 2016, 2016, 2016, The Japan Society of Mechanical Engineers
  • P056 Consideration ofhitting motion cooperating with hitting tool by humanoid robot
    SUZUKI Hironori; KOBAYASHI Asuka; HAYASHI Kento; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of Conference of Kansai Branch, 2016, 2016, 2016, The Japan Society of Mechanical Engineers
  • P004 A study on catalog data of micro-drill by using data-mining method
    TABATA Shogo; SUZUKI Yoshimasa; AOYAMA Hiroyuki Eiichi; HIROGAKI Toshiki
    The Proceedings of Conference of Kansai Branch, 2016, 2016, 2016, The Japan Society of Mechanical Engineers
  • 618 Study on polishing characteristics of autonomous deformable tool which using the magnetic force
    Ma Lei; YAGUCHI Wataru; AOYAMA Eiichi; HIROGAKI Toshiki
    The Proceedings of Conference of Kansai Branch, 2016, 2016, 2016, The Japan Society of Mechanical Engineers
  • 617 Investigation of Characteristics of Small Size and High Strength Spiral Bevel Gear Fabricated by Five Axis Controlled Machining Center
    TOYOTA Shinya; SHIBATA Takashi; SAITO Masahiro; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of Conference of Kansai Branch, 2016, 2016, 2016, The Japan Society of Mechanical Engineers
  • 616 Study on Screw Cutting Performance by Three Axis Controlling Helical Interpolate Motion
    MATSUI Shota; HURUKI Tatsuya; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of Conference of Kansai Branch, 2016, 2016, 2016, The Japan Society of Mechanical Engineers
  • 615 Effect of Tuning Angular Acceleration Automatically by Servo Tuning Function in Rotary Axis Equipped with Direct Drive Motor for Machine Tools
    IKEGAMI Takakazu; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of Conference of Kansai Branch, 2016, 2016, 2016, The Japan Society of Mechanical Engineers
  • 409 Diagnostics of End-mill Process with an Infrared Imagery with Thermography and a Wireless Multifunctional Tool Holder System
    MATSUDA Ryo; SHINDOU Masatoshi; HIROGAKI Toshiki; AOYAMA Eiichi; HURUKI Tatsuya
    The Proceedings of Conference of Kansai Branch, 2016, 2016, 2016, The Japan Society of Mechanical Engineers
  • 5軸制御工作機械における旋回軸と直進軸の同期誤差の考察とその補正法の提案
    鈴木尊丸; 丸山優馬; 廣垣俊樹; 青山栄一
    精密工学会関西地方定期学術講演会講演論文集, 2015, 2015, 2015
  • ホモロジーの概念を導入したタクシー型AGVシステムの考察
    鈴木 二仁; 廣垣 俊樹; 青山 栄一; 小川 圭二; 植崎 大樹
    精密工学会学術講演会講演論文集, 2015, 2015, 2015, 公益社団法人 精密工学会
  • Study about correction method of position and orientation of large industrial robot with laser tracker measurement
    Kuroyanagi Sosuke; Yamauchi Syoki; Hirogaki Toshiki; Aoyama Eiichi; Furuta Masaki; Mori Koichi; Takahashi Kenichi
    Proceedings of JSPE Semestrial Meeting, 2015, 2015, 2015, The Japan Society for Precision Engineering
  • Consideration of the blow sound feedback movement using the industrial humanoid robot
    Kobayashi Asuka; Hayashi Kento; Hirogaki Toshiki; Aoyama Eiichi
    Proceedings of JSPE Semestrial Meeting, 2015, 2015, 2015, The Japan Society for Precision Engineering
  • Consideration of machining temperature during high speed cutting of CFRP with electroplated cBN end-mill
    Furuki Tatsuya; Kabaya Yugo; Hirogaki Toshiki; Aoyama Eiichi; Ogawa Keiji; Inaba Kiyofumi; Fujiwara Kazuna
    Proceedings of JSPE Semestrial Meeting, 2015, 2015, 2015, The Japan Society for Precision Engineering
  • Influence of grit size in high speed milling of CFRP with cBN electroplated end-mill
    Kabaya Yugo; Furuki Tatsuya; Hirogaki Toshiki; Aoyama Eiichi; Ogawa Keiji; Inaba Kiyofumi; Fujiwara Kazuna
    Proceedings of JSPE Semestrial Meeting, 2015, 2015, 2015, The Japan Society for Precision Engineering
  • Basic study of laser quenching forming method of sheet steel with small output semiconductor laser
    Hirota Tomonao; Oda Ryosuke; Hirogaki Toshiki; Aoyama Eiichi; Ogawa Keiji
    Proceedings of JSPE Semestrial Meeting, 2015, 2015, 2015, The Japan Society for Precision Engineering
  • 5節閉リンクコンパクトロボットを用いた平面磨き装置の検討
    呉 魏; 劉 宇東; 劉 涛; 廣垣 俊樹; 青山 栄一
    精密工学会学術講演会講演論文集, 2015, 2015, 2015, 公益社団法人 精密工学会
  • Study on Suitable Arrangement for Cooperation Movement with Two Industrial Robots
    Sugiura Takashi; Hirogaki Toshiki; Aoyama Eiichi
    Proceedings of JSPE Semestrial Meeting, 2015, 2015, 2015, The Japan Society for Precision Engineering
  • 薄板のレーザフォーミングと全体熱処理の複合加工法の考察
    織田 良輔; 廣垣 俊樹; 青山 栄一; 小川 圭二
    精密工学会学術講演会講演論文集, 2015, 2015, 2015, 公益社団法人 精密工学会
  • 高応答赤外線サーモグラフィを用いたハイポイドギヤのかみ合いモニター
    鈴木 光彦; 丹羽 広大; 廣垣 俊樹; 青山 栄一
    精密工学会学術講演会講演論文集, 2015, 2015, 2015, 公益社団法人 精密工学会
  • アイドリングストップ機能付き工作機械のサーボON-OFF時の振動特性
    佐藤 航; 藤本 雄奨; 廣垣 俊樹; 青山 栄一; 小川 圭二
    精密工学会学術講演会講演論文集, 2015, 2015, 2015, 公益社団法人 精密工学会
  • 左右ボールネジを用いた制振機構を有する工作機械の特性解析
    山下 竜弥; 芝田 亮介; 岸本 昌大; 廣垣 俊樹; 青山 栄一; 小川 圭二
    精密工学会学術講演会講演論文集, 2015, 2015, 2015, 公益社団法人 精密工学会
  • 旋回1軸と直進2軸の同期運動によるエンドミル切削点送り速度ベクトル一定下条件のサーボ特性の考察
    鈴木 尊丸; 丸山 優馬; 廣垣 俊樹; 青山 栄一; 小川 圭二
    精密工学会学術講演会講演論文集, 2015, 2015, 2015, 公益社団法人 精密工学会
  • High Speed Milling of CFRP with cBN Electroplated End-mill
    Furuki Tatsuya; Hirogaki Toshiki; Aoyama Eiichi; Ogawa Keiji; Inaba Kiyofumi
    Proceedings of JSPE Semestrial Meeting, 2015, 2015, 2015, The Japan Society for Precision Engineering
  • P095 Investigation of taxi type AGV system considering AGV motion on base conveyance order
    UESAKI Daiki; ITO Taiti; SUZUKI Tsuguhito; HIROGAKI Toshiki; AOYAMA Eichi; OGAWA Keiji
    The Proceedings of Conference of Kansai Branch, 2015, 2015, 2015, The Japan Society of Mechanical Engineers
  • P094 Vibration Characteristic of the Microperforator Movement in the Machine Tool Having the Counter Balance Mechanism Using the Right and Left Ball Screw
    KISHIMOTO Masahiro; HIROGAKI Toshiki; AOYAMA Eiichi; SHIBATA Ryosuke; YAMASHITA Tatsuya; OGAWA Keiji
    The Proceedings of Conference of Kansai Branch, 2015, 2015, 2015, The Japan Society of Mechanical Engineers
  • P092 Examination of Finishing Method of Micro Channel using the End mill type Magnetic Polishing Tool
    MURAKAMI Hiroki; FURUKI Tatsuya; HIROGAKI Toshiki; AOYAMA Eiichi; OGAWA Keiji
    The Proceedings of Conference of Kansai Branch, 2015, 2015, 2015, The Japan Society of Mechanical Engineers
  • P043 Multiple pulse irradiation set in the laser via hole formation for PWB
    IOZUMI Munetaka; HIROGAKI Toshiki; AOYAMA Eichi; OGAWA Keiji
    The Proceedings of Conference of Kansai Branch, 2015, 2015, 2015, The Japan Society of Mechanical Engineers
  • P041 Hitting sounds' feed-back control by humanoid robot and the application
    KOBAYASHI Asuka; HAYASHI Kento; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of Conference of Kansai Branch, 2015, 2015, 2015, The Japan Society of Mechanical Engineers
  • P040 Investigation of instantaneous rotation center and meshing frequency at Three-axis Driving Planetary Gear Set
    NAKAGAWA Masao; Mohamed Ali Ben Abbes
    The Proceedings of Conference of Kansai Branch, 2015, 2015, 2015, The Japan Society of Mechanical Engineers
  • P037 Two Axes Synchronous Accuracy of Plate Pivot Control under Various Poses of Dual Arm Robot
    HORIZUMI Yuichi; KINOSHITA Shun; WU Wei; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of Conference of Kansai Branch, 2015, 2015, 2015, The Japan Society of Mechanical Engineers
  • 603 Monitoring of End-mill Process with a Wireless Multifunctional Tool Holder System
    SHINDOU Masatoshi; MATSUDA Ryo; HURUKI Tatsuya; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of Conference of Kansai Branch, 2015, 2015, 2015, The Japan Society of Mechanical Engineers
  • 608 Less Deformation entire hardening of thin plate by a laser beam based on the power consumption minimization principle
    ODA Ryosuke; HIROGAKI Toshiki; AOYAMA Eiich; OGAWA Keiji
    The Proceedings of Conference of Kansai Branch, 2015, 2015, 2015, The Japan Society of Mechanical Engineers
  • 607 Study on polishing characteristics of autonomous deformable tool which using the magnetic force
    Ma Lei; YAGUCHI Wataru; AOYAMA Eiichi; HIROGAKI Toshiki
    The Proceedings of Conference of Kansai Branch, 2015, 2015, 2015, The Japan Society of Mechanical Engineers
  • 606 Development of Direct Driving Motor for Machine Tools and its Applications
    IKEGAMI Takakazu; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of Conference of Kansai Branch, 2015, 2015, 2015, The Japan Society of Mechanical Engineers
  • 526 Study of the Dynamic Accuracy in Skillful Operating of Working Plate to Control of Ball Rolling Motion with a Dual Arm Robot
    Kinoshita Shun; WU Wei; HIROGAKI Toshiki; AOYAMA Eiichi
    Dynamics and Design Conference : D & D, 25 Aug. 2014, 25 Aug. 2014, 25 Aug. 2014, The Japan Society of Mechanical Engineers
  • Consideration of a blow and the blow sound feedback movement using the humanoid robot
    Hayashi Kento; Hirogaki Toshiki; Aoyama Eiichi
    Proceedings of JSPE Semestrial Meeting, 2014, 2014, 2014, The Japan Society for Precision Engineering
  • Analysis of chatter vibration based on the monitoring of end-mill surface pattern
    Shiota Ryosuke; Furuki Tatsuya; Hirogaki Toshiki; Aoyama Eiichi
    Proceedings of JSPE Semestrial Meeting, 2014, 2014, 2014, The Japan Society for Precision Engineering
  • Study on Servo Characteristic of Linear Axes and a Rotary Axis to Maintain Feed Speed Vector at Milling Point with a Five-Axis Machining Center
    Maruyama Yuma; Akai Takayuki; Hirogaki Toshiki; Aoyama Eiichi; Ogawa Keiji
    Proceedings of JSPE Semestrial Meeting, 2014, 2014, 2014, The Japan Society for Precision Engineering
  • LCA estimation and environmental burden reduction technique on end-milling condition derived from catalog-mining
    Kodama Hiroyuki; Hirogaki Toshiki; Aoyama Eiichi; Ogawa Keiji; Okuda Koichi
    Proceedings of JSPE Semestrial Meeting, 2014, 2014, 2014, The Japan Society for Precision Engineering
  • High Speed Face Milling of CFRP with Various End-mill Type Tools
    Furuki Tatsuya; Hirogaki Toshiki; Aoyama Eiichi; Ogawa Keiji
    Proceedings of JSPE Semestrial Meeting, 2014, 2014, 2014, The Japan Society for Precision Engineering
  • Ball end-mill condition derived from catalog mining and cutting evaluation focus on inclination angle
    Sugaya Yui; Kodama Hiroyuki; Hirogaki Toshiki; Aoyama Eiichi; Ogawa Keiji
    Proceedings of JSPE Semestrial Meeting, 2014, 2014, 2014, The Japan Society for Precision Engineering
  • Manufacturing the green self-adhesion molding using only bamboo fiber which with considering sustainable manufacturing system:Suggestion of Manufacturing Method of Bowl
    Nakamura Yusuke; Minh Huynh; Ogawa Keiji; Hirogaki Toshiki; Aoyama Eiichi; Nobe Hiromichi
    Proceedings of JSPE Semestrial Meeting, 2014, 2014, 2014, The Japan Society for Precision Engineering
  • 212 Influence of the Number of AGVs on Products Conveyance Efficiency in AGV Transportation System Based on Knowledge of Taxis
    SUZUKI Tsuguhito; ITO Taichi; HIROGAKI Toshiki; AOYAMA Eichi; OGAWA Keiji
    The Proceedings of Conference of Kansai Branch, 2014, 2014, 2014, The Japan Society of Mechanical Engineers
  • Meshing Contact Monitor of Hypoid Gears Using a High Response Thermography
    NIWA Kodai; PIHET Raphael; HIROGAKI Toshiki; AOYAMA Eiichi
    Proceedings of JSPE Semestrial Meeting, 2014, 2014, 2014, The Japan Society for Precision Engineering
  • Fabrication Method of Smooth Micro-unevenness Mirror Surface of Difficult-to-Cut Material with a Machining Center
    Furuki Tatsuya; Ma Lei; Hirogaki Toshiki; Aoyama Eiichi; Ogawa Keiji
    Proceedings of JSPE Semestrial Meeting, 2014, 2014, 2014, The Japan Society for Precision Engineering
  • Micro-hole Drilling of Printed Wiring Boards by Machine Tools with Super-high-speed Spindle:Investigation of Vibration Control Effect by Z-axis Counterbalance Mechanism
    Shibata Ryosuke; Hirogaki Toshiki; Aoyama Eiichi; Ogawa Keiji
    Proceedings of JSPE Semestrial Meeting, 2014, 2014, 2014, The Japan Society for Precision Engineering
  • マシニングセンタによって抽出された天然竹繊維のみを用いて成形した平歯車の基本性能の考察
    大石 晃裕; 廣垣 俊樹; 青山 栄一; 小川 圭二; 野辺 弘道
    精密工学会学術講演会講演論文集, 2014, 2014, 2014, 公益社団法人 精密工学会
  • 419 Evaluation Method of Meshing Situation at Three-axis Driving Planetary Gear Set for Hybrid Vehicle
    NAKAGAWA Masao; Abbes Mohamed Ali Ben
    The Proceedings of Conference of Kansai Branch, 2014, 2014, 2014, The Japan Society of Mechanical Engineers
  • 408 Decision of Drilling Conditions for PCBs by Using Catalog-mining Method Focusing on Drill Shape
    SUZUKI Yoshimasa; HANEDA Hisaya; KODAMA Hiroyuki; AOYAMA Eiichi; HIROGAKI Toshiki; OGAWA Keiji
    The Proceedings of Conference of Kansai Branch, 2014, 2014, 2014, The Japan Society of Mechanical Engineers
  • 406 Study on the path of polishing on machining center by end-mill type of magnetic abrasive tool
    Ma Lei; FURUKI Tatsuya; HIROGAKI Toshiki; AOYAMA Eiichi; OGAWA Keiji
    The Proceedings of Conference of Kansai Branch, 2014, 2014, 2014, The Japan Society of Mechanical Engineers
  • 405 Elucidation of End-Mill Process Based on Infrared Image Diagnostic
    SHINDOU Masatoshi; MATSUDA Ryo; HURUKI Tatsuya; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of Conference of Kansai Branch, 2014, 2014, 2014, The Japan Society of Mechanical Engineers
  • 708 A Study of Polishing Motion Using the Minute Change Force with a 5-Axes Closed Link Robot
    LIU Yudong; WU Wei; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of Conference of Kansai Branch, 2014, 2014, 2014, The Japan Society of Mechanical Engineers
  • 404 Examination of whole Quenching in thin plate based on Save electricity Semiconductor Laser
    WANG Runyi
    The Proceedings of Conference of Kansai Branch, 2014, 2014, 2014, The Japan Society of Mechanical Engineers
  • 1210 Investigation of Dynamic Characteristic of Planetary Gear Set Based on Three-axes Torque Measuring under Power Distribution of Hybrid Vehicle
    NAKAGAWA Masao; HIROGAKI Toshiki; AOYAMA Eiichi; Mohamed Ali Ben Abbes; MIYATA Takahiro
    The Proceedings of the Machine Design and Tribology Division meeting in JSME, 2014, 2014, 2014, The Japan Society of Mechanical Engineers
  • C40 Investigation of abrasion phenomenon of micro-drilling for Print Writing Boards containing high hardness fillers
    HASEGAWA Satoshi; AOYAMA Eiichi; HIROGAKI Toshiki; OGAWA Keiji
    The Proceedings of The Manufacturing & Machine Tool Conference, 2014, 2014, 2014, The Japan Society of Mechanical Engineers
  • A33 Consideration about the Magnetic Polishing by End Mill shaped Tool at the Bottom of Micro Channel
    MURAKAMI Hiroki; FURUKI Tatsuya; AOYAMA Eiichi; HIROGAKI Toshiki; OGAWA Keiji
    The Proceedings of The Manufacturing & Machine Tool Conference, 2014, 2014, 2014, The Japan Society of Mechanical Engineers
  • Phenomena elucidation of micro-drilling for printed wiring boards containing high hardness fillers : Investigation of drilling force and drilling temperature
    長谷川 聡; 児玉 紘幸; 青山 栄一
    砥粒加工学会学術講演会講演論文集 ABTEC, 2013, 2013, 2013, 砥粒加工学会
  • Heat treatment of the small parts by the low-powered diode laser aimed at energy saving
    Oda Ryosuke; Hirogaki Toshiki; Aoyama Eiichi; Ogawa Keiji; Ogawa Sachiko
    Proceedings of JSPE Semestrial Meeting, 2013, 2013, 2013, The Japan Society for Precision Engineering
  • カタログマイニング手法を適用したボールエンドミル切削条件決定支援システムの実験的検証
    児玉 紘幸; 廣垣 俊樹; 青山 栄一; 小川 圭二
    精密工学会学術講演会講演論文集, 2013, 2013, 2013, 公益社団法人 精密工学会
  • Reducing Power Consumption of Five-axis-controlled Compact Machine Tools
    Nagawaki Tomohiro; Hirogaki Toshiki; Aoyama Eiichi; Ogawa Keiji
    Proceedings of JSPE Semestrial Meeting, 2013, 2013, 2013, The Japan Society for Precision Engineering
  • 消費電力に基づくコンパクト工作機械のアイドリングストップ機能と同時多軸制御技術の考察
    藤本 雄奨; 廣垣 俊樹; 青山 栄一; 宮澤 健太; 小川 圭二
    精密工学会学術講演会講演論文集, 2013, 2013, 2013, 公益社団法人 精密工学会
  • サスティナブル生産システムを指向した竹繊維のみを用いたグリーン自己接着成形体の製造:マシニングセンタによる繊維抽出の高効率化
    居村 真也; 小川 圭二; 廣垣 俊樹; 青山 栄一; 野辺 弘道
    精密工学会学術講演会講演論文集, 2013, 2013, 2013, 公益社団法人 精密工学会
  • Tooth Strength and Meshing Characteristic of Spur Gear Molded From Only Bamboo Fiber Extracted with a Machining Center
    Oishi Akihiro; Hirogaki Toshiki; Aoyama Eiichi; Ogawa Keiji; Nobe Hiromichi
    Proceedings of JSPE Semestrial Meeting, 2013, 2013, 2013, The Japan Society for Precision Engineering
  • Contact Analyses of the Hypoid gear Based on Thermal Images
    Niwa Kodai; Hirogaki Toshiki; Aoyama Eiichi; Pihet Raphael; Nakajima Kouji
    Proceedings of JSPE Semestrial Meeting, 2013, 2013, 2013, The Japan Society for Precision Engineering
  • エンドミル型工具を用いた磁気研磨技術のマイクロチャネル形状への応用
    竹林 佑介; 廣垣 俊樹; 青山 栄一; 小川 圭二; Shreyes N. Melkote
    精密工学会学術講演会講演論文集, 2013, 2013, 2013, 公益社団法人 精密工学会
  • Motion Characteristic of Liner Axes and a Rotary Axis under Constant Feed Speed Vector at Milling Point with a Five-Axis Machining Center
    Maruyama Yuma; Akai Takayuki; Hirogaki Toshiki; Aoyama Eiichi; Ogawa Keiji
    Proceedings of JSPE Semestrial Meeting, 2013, 2013, 2013, The Japan Society for Precision Engineering
  • 魔鏡像の評価に基づくエンドミル型工具による磁気研磨パスの考察
    古木 辰也; 馬 雷; 廣垣 俊樹; 青山 栄一
    精密工学会学術講演会講演論文集, 2013, 2013, 2013, 公益社団法人 精密工学会
  • ハイブリット車に用いられる遊星歯車の動特性評価
    宮田 隆広; 康 龍波; 廣垣 俊樹; 青山 栄一
    精密工学会学術講演会講演論文集, 2013, 2013, 2013, 公益社団法人 精密工学会
  • 双腕ロボットによるプレート操り制御におけるプレート支持位置の影響
    呉 魏; 木下 俊; 廣垣 俊樹; 青山 栄一
    精密工学会学術講演会講演論文集, 2013, 2013, 2013, 公益社団法人 精密工学会
  • 922 Control of AGV based on knowledge of taxi and take account of intersection
    ITO Taichi; MITUOKA Daisuke; HIROGAKI Toshiki; AOYAMA Eichi; OGAWA Keiji
    The Proceedings of Conference of Kansai Branch, 2013, 2013, 2013, The Japan Society of Mechanical Engineers
  • 916 Consideration of Percussion Motion with a Humanoid Robot using flexible Rubber Sticks
    SUGIURA Yoshihisa; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of Conference of Kansai Branch, 2013, 2013, 2013, The Japan Society of Mechanical Engineers
  • 903 Control of Polygonal Ball Rolling Motion by Operating Working Plate with a Dual arm Robot
    KINOSHITA Shun; WU Wei; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of Conference of Kansai Branch, 2013, 2013, 2013, The Japan Society of Mechanical Engineers
  • 605 Printed Circuit Board Drilling Conditions of Machine Learning from Catalog Mining
    HANEDA Hisaya; KODAMA Hiroyuki; AOYAMA Eiichi; HIROGAKI Toshiki; OGAWA Keiji
    The Proceedings of Conference of Kansai Branch, 2013, 2013, 2013, The Japan Society of Mechanical Engineers
  • 603 Estimation of MQL Process Based on Monitoring End-Mill Temperature by Infrared Image
    SHINDOU Masatoshi; KODAMA Hiroyuki; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of Conference of Kansai Branch, 2013, 2013, 2013, The Japan Society of Mechanical Engineers
  • 604 Development of Magnetic Polishing for Micro Channel by Ballnose Shaped-tool
    TAKEBAYASHI Yusuke; HIROGAKI Toshiki; AOYAMA Eiichi; OGAWA Keiji; MELKOTE Shreyes
    The Proceedings of Conference of Kansai Branch, 2013, 2013, 2013, The Japan Society of Mechanical Engineers
  • Phenomena elucidation of micro-drilling for printed wiring boards containing high hardness fillers : Investigation of drill wear and temperature during drilling
    FUNABIKI Taiji; KODAMA Hiroyuki; AOYAMA Kiichi; HIROGAKI Toshiki; OGAWA Keiji
    Journal of the Japan Society for Abrasive Technology, 2012, 2012, 2012, The Japan Society for Abrasive Technology
  • Fabrication of Binder-free Green Composite Using Bamboo Fibers Oriented to Sustainable Manufacturing System:Influence of fiber shape on bamboo fiber board's performances
    Ogawa Sachiko; Hirogaki Toshiki; Aoyama Eiichi; Ogawa Keiji; Nobe Hiromichi
    Proceedings of JSPE Semestrial Meeting, 2012, 2012, 2012, The Japan Society for Precision Engineering
  • データマイニングを用いた切削条件決定支援システム:LCAを適用した評価
    坂本 純一; 廣垣 俊樹; 青山 栄一; 小川 圭二; 児玉 紘幸
    精密工学会学術講演会講演論文集, 2012, 2012, 2012, 公益社団法人 精密工学会
  • Study on laser hardening for steel sheet with low power diode laser
    Ogawa Sachiko; Hirogaki Toshiki; Aoyama Eiichi
    Proceedings of JSPE Semestrial Meeting, 2012, 2012, 2012, The Japan Society for Precision Engineering
  • Micro-hole Drilling of Printed Wiring Boards by Machine Tools with Super-high-speed Spindle:Optimization of Rapid Micro-feed Step Drilling Cycle by Response Surface Method
    Noguchi Naoya; Hirogaki Toshiki; Aoyama Eiichi; Ogawa Keiji; Takeda Yutaka
    Proceedings of JSPE Semestrial Meeting, 2012, 2012, 2012, The Japan Society for Precision Engineering
  • 産業用ロボットによる工作物支持を援用したコンパクト多機能工作機械のエンドミル加工
    竹林 佑介; 廣垣 俊樹; 青山 栄一; 小川 圭二
    精密工学会学術講演会講演論文集, 2012, 2012, 2012, 公益社団法人 精密工学会
  • A Precision Measureing Method of Two-Rotary Axes of Table by Estimating Ball Rolling Motion
    Wu Wei; Hirogaki Toshiki; Aoyama Eiichi
    Proceedings of JSPE Semestrial Meeting, 2012, 2012, 2012, The Japan Society for Precision Engineering
  • Conveyance system of AGV which introduced the characteristic of taxi:The effects of multi-loaded and waiting
    Mitsuoka Daisuke; Hirogaki Toshiki; Aoyama Eiichi; Ogawa Keiji; Kono Takahiro
    Proceedings of JSPE Semestrial Meeting, 2012, 2012, 2012, The Japan Society for Precision Engineering
  • 5軸制御マシニングセンタにおける切削点送り速度ベクトル一定化条件下でのエンドミル加工による形状創成:2次元対称形状における曲率中心の不連続変化の影響
    中村 義隆; 廣垣 俊樹; 青山 栄一; 小川 圭二
    精密工学会学術講演会講演論文集, 2012, 2012, 2012, 公益社団法人 精密工学会
  • 遊星歯車機構におけるかみあい起振力の外部モニター手法の検討
    宮田 隆広; 廣垣 俊樹; 青山 栄一; 康 龍波
    精密工学会学術講演会講演論文集, 2012, 2012, 2012, 公益社団法人 精密工学会
  • サスティナブル生産システムを指向した竹繊維のみを用いたグリーン自己接着成形体の製造:マシニングセンタの繊維抽出条件と機械的特性の関係
    居村 真也; 小川 圭二; 廣垣 俊樹; 青山 栄一; 野辺 弘道
    精密工学会学術講演会講演論文集, 2012, 2012, 2012, 公益社団法人 精密工学会
  • E33 Magic-Mirror Surface Fabrication by CNC Ball End-Milling and Magnetic Abrasive Finishing
    KAWAI Ryohei; AOYAMA Eiichi; HIROGAKI Toshiki; OGAWA Keiji
    The Proceedings of The Manufacturing & Machine Tool Conference, 2012, 2012, 2012, The Japan Society of Mechanical Engineers
  • B22 Fabrication and Performance Assessment of Natural Fiber Gears Made From Only Bamboo Fiber Extracted with a Machining Center
    NISHIDA Shogo; HIROGAKI Toshiki; AOYAMA Eiichi; OGAWA Keiji; NOBE Hiromichi
    The Proceedings of The Manufacturing & Machine Tool Conference, 2012, 2012, 2012, The Japan Society of Mechanical Engineers
  • B19 Knowledge discovery of ball end mill condition derived from catalog mining system
    FUKASAWA Hiroaki; KODAMA Hiroyuki; SUGAYA Yui; HIROGAKI Toshiki; AOYAMA Eiichi; OGAWA Keiji
    The Proceedings of The Manufacturing & Machine Tool Conference, 2012, 2012, 2012, The Japan Society of Mechanical Engineers
  • 1412 Super-finishing with fine-grit super-abrasive stone for small area of glass material
    OGAWA Sachiko; AOYAMA Eiichi; HIROGAKI Toshiki
    The Proceedings of Conference of Kansai Branch, 2012, 2012, 2012, The Japan Society of Mechanical Engineers
  • 1411 Study on laser hardening with a compact laser for small parts and its power consumption
    OGAWA Sachiko; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of Conference of Kansai Branch, 2012, 2012, 2012, The Japan Society of Mechanical Engineers
  • 1407 Consideration of Digital Magic Mirror Fabrication using CNC Machining Center
    KAWAI Ryohei; AOYAMA Eiichi; HIROGAKI Toshiki; OGAWA Keiji
    The Proceedings of Conference of Kansai Branch, 2012, 2012, 2012, The Japan Society of Mechanical Engineers
  • 1404 Development of Monitoring Method of End-Milling Processes by Infrared Image
    SHINDOU Masatoshi; KODAMA Hiroyuki; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of Conference of Kansai Branch, 2012, 2012, 2012, The Japan Society of Mechanical Engineers
  • 1402 Development of the hitting sound feedback system using humanoid robot and deliberation of the hitting motion as task is to play metallophone
    KIUCHI Hirofumi; AOYAMA Eichi; SUGIURA Yoshihisa; HIROGAKI Toshiki
    The Proceedings of Conference of Kansai Branch, 2012, 2012, 2012, The Japan Society of Mechanical Engineers
  • 1207 Analysis of Temperature Cycle for Mesh of Hypoid Gears Using Infrared Ray Imagery
    NAKAJIMA Kouji; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of Conference of Kansai Branch, 2012, 2012, 2012, The Japan Society of Mechanical Engineers
  • 211 Investigation of Operating Plate and Its Accuracy by Dual Arm Cooperative Motion of Dual Arm Robot
    WU Wei
    The Proceedings of Manufacturing Systems Division Conference, 2012, 2012, 2012, The Japan Society of Mechanical Engineers
  • Life Cycle Assessment for Binder-free Composites Made from Bamboo Fibers Extracted with a Machining Center
    Ogawa Keiji; Hirogaki Toshiki; Aoyama Eiichi; Takagi Youta; Ogawa Sachiko
    Proceedings of JSPE Semestrial Meeting, 2011, 2011, 2011, The Japan Society for Precision Engineering
  • Environmental load evaluation focusing on producer goods for fixed-abrasive polishing with compact robot
    Ogawa Sachiko; Okumura Shinpei; Hirogaki Toshiki; Aoyama Eiichi; Onchi Yoshiaki
    Proceedings of JSPE Semestrial Meeting, 2011, 2011, 2011, The Japan Society for Precision Engineering
  • Study on laser hardening for small parts with low power diode laser and its energy efficiency
    Ogawa Sachiko; Okamoto Rie; Hirogaki Toshiki; Aoyama Eiichi; Ogawa Keiji
    Proceedings of JSPE Semestrial Meeting, 2011, 2011, 2011, The Japan Society for Precision Engineering
  • Estimation of Synchronous Error of Plate Pivot Control of Dual-Arm Robot by Observing Rolling Motion of Ball
    Wu Wei; Hirogaki Toshiki; Aoyama Eiichi
    Proceedings of JSPE Semestrial Meeting, 2011, 2011, 2011, The Japan Society for Precision Engineering
  • Research of knowledge discovery by applying data mining techniques intended for ball end mill
    Fukasawa Hiroaki; Kodama Hiroyuki; Hirogaki Toshiki; Aoyama Eiichi; Ogawa Keiji
    Proceedings of JSPE Semestrial Meeting, 2011, 2011, 2011, The Japan Society for Precision Engineering
  • Investigation of Contact Characteristics of FRP Gears Based on Observation with Thermography
    Nishida Shogo; Aoyama Eiichi; Hirogaki Toshiki; Ootawa Tomoki
    Proceedings of JSPE Semestrial Meeting, 2011, 2011, 2011, The Japan Society for Precision Engineering
  • Analysis of Movement Accuracy and Life Cycle Assessment for Closed Link Compact Machine
    Niwa Masaki; Aoyama Eiichi; Hirogaki Toshiki; Okumura Shinpei; Ogawa Sachiko
    Proceedings of JSPE Semestrial Meeting, 2011, 2011, 2011, The Japan Society for Precision Engineering
  • 1213 Rolling Control of the ball by Smooth Operating the Wbrking Plate with a Dual-aml Robot
    WU Wei; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of Conference of Kansai Branch, 2011, 2011, 2011, The Japan Society of Mechanical Engineers
  • 1205 Construction of Digital Makyoh by MAF using Machining Center
    Kawai Ryohei; Sawa Kazuya; Hirogaki Toshiki; Aoyama Eichi; Okubo Kazuya
    The Proceedings of Conference of Kansai Branch, 2011, 2011, 2011, The Japan Society of Mechanical Engineers
  • 1113 Tooth Contact Evaluation of Hypoid Gears Using Infrared Ray Imagery
    NAKAJIMA Kouji; HIROGAKI Toshiki; AOYAMA Eiichi; USUI Yoshitaka; NAGATA Masaki
    The Proceedings of Conference of Kansai Branch, 2011, 2011, 2011, The Japan Society of Mechanical Engineers
  • 1112 Evaluation of Meshing Force of Considering Three axis UO of Planetary Gear Mechanism
    Morimoto Yuta; Hirogaki Toshiki; Aoyaka Eiichi; Uenishi Yasuhiro
    The Proceedings of Conference of Kansai Branch, 2011, 2011, 2011, The Japan Society of Mechanical Engineers
  • 旋回軸運動を利用した切削点送り速度ベクトル一定化条件下での加工方法:2次元対象形状の曲率半径および曲率中心の影響
    川口 二俊; 廣垣 俊樹; 青山 栄一; 小川 圭二; 堀内 貴弘
    精密工学会学術講演会講演論文集, 2010, 2010, 2010, 公益社団法人 精密工学会
  • Micro Hole Drilling in Printed Wiring Boards Using Super-High-Speed Spindle:Effect of Rapid-Microfeed Step-Drilling Cycle
    Takeda Yutaka; Hirogaki Toshiki; Aoyama Eiichi; Ogawa Keiji
    Proceedings of JSPE Semestrial Meeting, 2010, 2010, 2010, The Japan Society for Precision Engineering
  • Fabrication of Binder-free Green Composite Using Bamboo Fibers Oriented to Sustainable Manufacturing System
    Ogawa Keiji; Hirogaki Toshiki; Aoyama Eiichi; Taniguchi Mitsuaki; Ogawa Sachiko; Nobe Hiromichi
    Proceedings of JSPE Semestrial Meeting, 2010, 2010, 2010, The Japan Society for Precision Engineering
  • 5節閉リンク小型ロボットによるガラス平面の固定砥粒磨き動作の検討
    奥村 慎平; 青山 栄一; 廣垣 俊樹; 小川 圭二; 恩地 好晶
    精密工学会学術講演会講演論文集, 2010, 2010, 2010, 公益社団法人 精密工学会
  • 422 Fabrication of Resources Recycling Self-Adhesive Products Using Only Bamboo Fibers Extracted with a Machining Center
    TAKAGI Yota; OGAWA Keiji; HIROGAKI Toshiki; AOYAMA Eiichi; TANIGUCHI Mitsuaki; OGAWA Sachiko
    The Proceedings of Conference of Kansai Branch, 2010, 2010, 2010, The Japan Society of Mechanical Engineers
  • 421 LCA Analysis of Integrated System of Small Articulated Robot and Desktop Machine
    OKAMOTO Rie; HIROGAKI Toshiki; AOYAMA Eiichi; SUZUKI Masafumi
    The Proceedings of Conference of Kansai Branch, 2010, 2010, 2010, The Japan Society of Mechanical Engineers
  • 420 A fundamental Study on the Controlling of Working Plate by Dual-arm Robot
    WU Wei; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of Conference of Kansai Branch, 2010, 2010, 2010, The Japan Society of Mechanical Engineers
  • 309 Controlling Motion of Rolling Ball by Operating the Working Plate with a Dual-arm Robot
    WU Wei; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of the Dynamics & Design Conference, 2010, 2010, 2010, The Japan Society of Mechanical Engineers
  • E14 Optimum Operation of Rotational-axis and Linear-axis based on Power Consumption with a Desktop Five-axis Controlled Machining Center
    SUTO Katsumasa; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of The Manufacturing & Machine Tool Conference, 2010, 2010, 2010, The Japan Society of Mechanical Engineers
  • B14 Investigation of Laser Heat treatment by LCA
    OKAMOTO Rie; HIROGAKI Toshiki; AOYAMA Eiichi; OGAWA Keiji; OGAWA Sachiko
    The Proceedings of The Manufacturing & Machine Tool Conference, 2010, 2010, 2010, The Japan Society of Mechanical Engineers
  • B13 Shape Generation of Color Changing and Lustrous Object with Photometric Stereo Method
    NAKATANI Ryo; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of The Manufacturing & Machine Tool Conference, 2010, 2010, 2010, The Japan Society of Mechanical Engineers
  • A11 Fabrication and performance evaluation of Resources Recycling Self-Adhesive Products Using Only Bamboo Fibers Extracted with a Machining Center
    TAKAGI Yota; HIROGAKI Toshiki; AOYAMA Eiichi; OGAWA Keiji; OGAWA Sachiko
    The Proceedings of The Manufacturing & Machine Tool Conference, 2010, 2010, 2010, The Japan Society of Mechanical Engineers
  • 1305 Automatic Tooth Contact Evaluation Method Based on Near-Infrared Ray Imagery
    HIROGAKI Toshiki; AOYAMA Eiichi; USUI Yoshitaka; NAGATA Masaki
    The Proceedings of the Machine Design and Tribology Division meeting in JSME, 2010, 2010, 2010, The Japan Society of Mechanical Engineers
  • 1304 Investigation of Contact Characteristics of Long-fiber Reinforced Plastic Gears Based on Observation with a High-speed Camera and a Thermography
    OTAWA Tomoki; AOYAMA Eiichi; HIROGAKI Toshiki
    The Proceedings of the Machine Design and Tribology Division meeting in JSME, 2010, 2010, 2010, The Japan Society of Mechanical Engineers
  • High Quality Bamboo Fiber Extraction from Bamboo Using a Machining Center Oriented to Sustainable Manufacturing System:Tool Path Decision Methodology Based on In-situ Measurement
    Ogawa Keiji; Hirogaki Toshiki; Aoyama Eiichi; Taniguchi Mitsuaki; Ogawa Sachiko
    Proceedings of JSPE Semestrial Meeting, 2009, 2009, 2009, The Japan Society for Precision Engineering
  • CAD-less Machining by photometric stereo method
    Fukura Masayuki; Hirogaki Toshiki; Aoyama Eiichi; Nakamura Seiji; Toyama Kazumasa
    Proceedings of JSPE Semestrial Meeting, 2009, 2009, 2009, The Japan Society for Precision Engineering
  • AGV System Using the Autonomous Decentralized Cooperative Characteristic of Taxi Traveling:Influence of Number of AGVs on Traveling Efficiency
    Kono Takahiro; Ogawa Keiji; Hirogaki Toshiki; Aoyama Eiichi
    Proceedings of JSPE Semestrial Meeting, 2009, 2009, 2009, The Japan Society for Precision Engineering
  • Study on high speed step feed drilling using microdrills for Printed Wiring Boards (PWB)
    Takeda Yutaka; Hirogaki Toshiki; Aoyama Eiichi; Ogawa Keiji; Nojiri Hiroshi
    Proceedings of JSPE Semestrial Meeting, 2009, 2009, 2009, The Japan Society for Precision Engineering
  • Cu-Direct Drilling of Blind Via-hole in Multi-layer PWBs using CO2 Laser beam:Effect of hydrated alumina filler on drilled hole quality
    Hirogaki Toshiki; Ayuzawa Tsukasa; Aoyama Eiichi; Ogawa Keiji
    Proceedings of JSPE Semestrial Meeting, 2009, 2009, 2009, The Japan Society for Precision Engineering
  • Micro-drilling of CFRP plates using high revolution spindle:Comparison of characteristics in case of GFRP and AFRP
    Ogawa Keiji; Nakagawa Heisaburo; Hirogaki Toshiki; Aoyama Eiichi
    Proceedings of JSPE Semestrial Meeting, 2009, 2009, 2009, The Japan Society for Precision Engineering
  • High Quality Bamboo Fiber Extraction from Bamboo Using a Machining Center Oriented to Sustainable Manufacturing System:Investigation of High Aspect Ratio Fiber Based on Cutting Conditions
    Husson Remi; Ogawa Sachiko; Ogawa Keiji; Hirogaki Toshiki; Aoyama Eiichi; Taniguchi Mitsuaki
    Proceedings of JSPE Semestrial Meeting, 2009, 2009, 2009, The Japan Society for Precision Engineering
  • 911 Clarification of Characteristic of FRP Gear Meshing with High-speed Camera Image
    OTAWA Tomoki; AOYAMA Eiichi; HIROGAKI Toshiki; KAWASAKI Takahiro
    The Proceedings of Conference of Kansai Branch, 2009, 2009, 2009, The Japan Society of Mechanical Engineers
  • 626 The Surface Generation of Glass by Micromachine using a Fixed Abrasive Process
    Okumura Shinpei; Aoyama Eiichi; Hirogaki Toshiki
    The Proceedings of Conference of Kansai Branch, 2009, 2009, 2009, The Japan Society of Mechanical Engineers
  • 614 Shape Reproduction and Cutter Location Generated by Normal Vector Derived by Photometric Stereo Method
    NAKAMURA Seishi; AOYAMA Eiichi; HIROGAKI Toshiki; FUKURA Masayuki
    The Proceedings of Conference of Kansai Branch, 2009, 2009, 2009, The Japan Society of Mechanical Engineers
  • Quality estimation of micro PWB diameter hole drilled by super-high-speed spindle
    Hirogaki Toshiki; Aoyama Eiichi; Ogawa Keiji; Otuka Tsuyoshi; Nojiri Hiroshi
    Proceedings of JSPE Semestrial Meeting, 2008, 2008, 2008, The Japan Society for Precision Engineering
  • Study on Digital Manufacturing of Makyoh Surface using a Machining Center and Polishing Processing
    Hirogaki Toshiki; Aoyama Eiichi; Ogawa Keiji; Shiomi Tomohiro; Sekimoto Masaki
    Proceedings of JSPE Semestrial Meeting, 2008, 2008, 2008, The Japan Society for Precision Engineering
  • A proposal of an AGV system applied of autonomous, distributed and cooperative characteristics in taxi traveling
    Ogawa Keiji; Hirogaki Toshiki; Aoyama Eiichi; Yoneda Tetsurou
    Proceedings of JSPE Semestrial Meeting, 2008, 2008, 2008, The Japan Society for Precision Engineering
  • Proposal of Fixed Cycle Slot Drilling Method for PWBs
    Ogawa Sachiko; Hirogaki Toshiki; Aoyama Eiichi; Yoshida Norihiro
    Proceedings of JSPE Semestrial Meeting, 2008, 2008, 2008, The Japan Society for Precision Engineering
  • Estimation of Microdrilling Based on Monitoring Temperature around Drilled Hole
    Hirogaki Toshiki; Aoyama Eiichi; Ogawa Keiji; Nojiri Hiroshi
    Proceedings of JIEP Annual Meeting, 2008, 2008, 2008, The Japan Institute of Electronics Packaging
  • 1124 Cu-direct Laser Drilling on Multi-layer Printed Wiring Boards : Influence of Surface Condition on Laser Drilling
    鮎澤 司; 松谷 章吾; 青山 栄一; 廣垣 俊樹; 小川 圭二
    The Proceedings of Conference of Kansai Branch, 2008, 2008, 2008, The Japan Society of Mechanical Engineers
  • 1123 Examination of new process passing about router processing to AFRP printed wiring board
    青山 栄一; 廣垣 俊樹; 仲西 亮
    The Proceedings of Conference of Kansai Branch, 2008, 2008, 2008, The Japan Society of Mechanical Engineers
  • 1122 Study on CAM System for Printed Wiring Boards : Optimization of Number of Sheet According to Processing Temperature
    大川 剛史; 青山 栄一; 廣垣 俊樹; 住田 誠太
    The Proceedings of Conference of Kansai Branch, 2008, 2008, 2008, The Japan Society of Mechanical Engineers
  • 1121 Study on Freeform Surface Machined by Machining Center : Evalution and method to Improves of Machined Surface Quality
    須知 亮; 青山 栄一; 廣垣 俊樹; 小川 圭二
    The Proceedings of Conference of Kansai Branch, 2008, 2008, 2008, The Japan Society of Mechanical Engineers
  • 1120 Nano surface generation of the hard brittleness material by the constant pressure processing
    杉山 太一; 青山 栄一; 廣垣 俊樹; 恩地 好晶
    The Proceedings of Conference of Kansai Branch, 2008, 2008, 2008, The Japan Society of Mechanical Engineers
  • 1119 A Development on In-process Monitoring Technology of Dressing Time on Grinding Wheel
    CHANG che yu; AOYAMA Eiichi; HIROGAKI Toshiki
    The Proceedings of Conference of Kansai Branch, 2008, 2008, 2008, The Japan Society of Mechanical Engineers
  • 1117 Proposal of Bamboo Fiber Extraction Method Using CNC Function of Machining Center
    谷口 允昭; 青山 栄一; 廣垣 俊樹; 小川 圭二
    The Proceedings of Conference of Kansai Branch, 2008, 2008, 2008, The Japan Society of Mechanical Engineers
  • 207 Study of Multi-functional Desktop Machine Tool for Cell Manufacturing System
    HIROGAKI Toshiki; AOYAMA Eiichi; OGAWA Keiji; SUZUKI Masafumi; NICHIKUBO Takuya
    The Proceedings of Conference of Kansai Branch, 2008, 2008, 2008, The Japan Society of Mechanical Engineers
  • D35 Fixed grain polishing using a five link micro robot
    SUGIYAMA Taichi; AOYAMA Eiichi; HIROGAKI Toshiki; ONCHI Yoshiaki
    The Proceedings of The Manufacturing & Machine Tool Conference, 2008, 2008, 2008, The Japan Society of Mechanical Engineers
  • C38 Digital Manufacturing of Makyoh Surface Using NC Cutting and Polishing Processing
    HIROGAKI Toshiki; AOYAMA Eiichi; SEKIMOTO Masaki; OGAWA Keiji
    The Proceedings of The Manufacturing & Machine Tool Conference, 2008, 2008, 2008, The Japan Society of Mechanical Engineers
  • C28 Examination of Processing Passing by Prevention of Shagginess on Router Processing Side of AFRP Printed Wiring Board
    AOYAMA Eiichi; HIROGAKI Toshiki; NAKANISHI Ryo
    The Proceedings of The Manufacturing & Machine Tool Conference, 2008, 2008, 2008, The Japan Society of Mechanical Engineers
  • C27 Evaluation of Form Accuracy Considered Redundancy of Control Axes with 5-Axis Controlled Machining Center
    KAWAGUCHI Tsugutoshi; HIROGAKI Toshiki; AOYAMA Eiichi; OGAWA Keiji
    The Proceedings of The Manufacturing & Machine Tool Conference, 2008, 2008, 2008, The Japan Society of Mechanical Engineers
  • A09 Multi-functional Small Machine Tool with Laser Heat Treatment System
    HIROGAKI Toshiki; AOYAMA Eiichi; OGAWA Keiji; SUZUKI Masafumi; NISHIKUBO Takuya
    The Proceedings of The Manufacturing & Machine Tool Conference, 2008, 2008, 2008, The Japan Society of Mechanical Engineers
  • 2206 Design Method of Number of Teeth for Low Noise Gear for Vehicle Transmission Considering Human Aural Characteristics
    ARARAGI Takayuki; UENISHI Yasuhiro; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of the Machine Design and Tribology Division meeting in JSME, 2008, 2008, 2008, The Japan Society of Mechanical Engineers
  • 2203 The Vibration Characteristic of the FRP Gear : Evaluation of Gear Meshing with Hi-Speed Camera
    KAWASAKI Yoshihiro; AOYAMA Eiichi; HIROGAKI Toshiki; ISE Teturou; HARA Eiji
    The Proceedings of the Machine Design and Tribology Division meeting in JSME, 2008, 2008, 2008, The Japan Society of Mechanical Engineers
  • Proposal of Bamboo Fiber Extraction Technique that uses Machining Centre
    Imamura Hajime; Aoyama Eiichi; Hirogaki Toshiki; Ogawa Keiji
    Proceedings of JSPE Semestrial Meeting, 2007, 2007, 2007, The Japan Society for Precision Engineering
  • Finished surface quality evaluation of three-dimensional free curved surface
    Aoyama Eiichi; Hirogaki Toshiki; Ogawa Keiji; Sueda Hidenori
    Proceedings of JSPE Semestrial Meeting, 2007, 2007, 2007, The Japan Society for Precision Engineering
  • The Most Suitable Control Method of AGV
    Aoyama Eiichi; hirogaki Toshiki; Ogawa Keiji; Yoneda Tetsurou
    Proceedings of JSPE Semestrial Meeting, 2007, 2007, 2007, The Japan Society for Precision Engineering
  • A Study of Decision Method of Cutting Condition to Use Data Mining
    Kitamura Tasuku; Aoyama Eiichu; Hirogaki Toshiki; Osaki Miho; Ogawa Keiji
    Proceedings of JSPE Semestrial Meeting, 2007, 2007, 2007, The Japan Society for Precision Engineering
  • Micro-drilled Hole Quality Evaluation for Multi-layer PWBs
    AOYMA Eiichi; HIROGAKI Toshiki; OGAWA Keiji; ITAGAKI Yuusuke
    Proceedings of JSPE Semestrial Meeting, 2007, 2007, 2007, The Japan Society for Precision Engineering
  • A Study of Cu-direct Via Hole Drilling Method by CO2 Laser in Manufacturing of Multi-layer Printed Wiring Boards
    青山 栄一; 廣垣 俊樹; 小川 圭二; 松谷 章吾
    Proceedings of JSPE Semestrial Meeting, 2007, 2007, 2007, The Japan Society for Precision Engineering
  • Study of Multi-functional Desktop Machine Tool for Cell Manufacturing System - Integration of Machining and Laser Heat Treatment Processes
    Hirogaki Toshiki; Aoyama Eiichi; Ogawa Keiji; Nishikubo Takuya; Iwama Masatoshi; Kubo Kaoru
    Proceedings of JSPE Semestrial Meeting, 2007, 2007, 2007, The Japan Society for Precision Engineering
  • Control of Cutting Forces in End Milling Processes Using Cutting-RP
    Aoyama Eiichi; Hirogaki Toshiki; Ogawa Keiji; Tanaka Shohei
    Proceedings of JSPE Semestrial Meeting, 2007, 2007, 2007, The Japan Society for Precision Engineering
  • エンドミルの切削条件決定におけるデータマイニングの適用:工具形状を考慮したカタログマイニング
    北村 祐; 青山 栄一; 廣垣 俊樹; 小川 圭二
    精密工学会学術講演会講演論文集, 2007, 2007, 2007, 公益社団法人 精密工学会
  • セル生産システムを目指した小型多機能工作機械に関する研究:切削とレーザ熱処理の統合化について
    廣垣 俊樹; 青山 栄一; 小川 圭二; 西久保 拓也; 岩間 正俊; 久保 かおる
    精密工学会学術講演会講演論文集, 2007, 2007, 2007, 公益社団法人 精密工学会
  • 1217 A Study on Vibration Characteristic of long-fibre FRP Gear
    KAWASAKI Yoshihiro; HIROGAKI Toshiki; AOYAMA Haruka; AOYAMA Eiichi; HARA Eiji; ISE Tetsuro
    The Proceedings of Conference of Kansai Branch, 2007, 2007, 2007, The Japan Society of Mechanical Engineers
  • 1311 Study on Thermal Damage of Minimum Diameter Hole Drilled by Super-High-Speed Spindle in PWB
    青山 栄一; 廣垣 俊樹; 小川 圭二; 大塚 剛史; 野尻 啓史
    The Proceedings of Conference of Kansai Branch, 2007, 2007, 2007, The Japan Society of Mechanical Engineers
  • 1319 Nano Surface Generation of the Hard Brittle Materials Using Diamond Grindstones
    SUGIYAMA Taichi; AOYAMA Eiichi; HIROGAKI Toshiki; ONCHI Yoshiaki; NAKA Sachiko
    The Proceedings of Conference of Kansai Branch, 2007, 2007, 2007, The Japan Society of Mechanical Engineers
  • 1320 Manufacturing Method of Makyoh Surface Using a Machining Centre and Polishing Processing
    SEKIMOTO Masaki; AOYAMA Eiichi; HIROGAKI Toshiki; OGAWA Keiji; SHIOMI Tomohiro
    The Proceedings of Conference of Kansai Branch, 2007, 2007, 2007, The Japan Society of Mechanical Engineers
  • 1316 Multi-functional Micro Machine Tool for Cell Manufacturing System
    廣垣 俊樹; 青山 栄一; 小川 圭二; 藤井 雄一; 西久保 拓也
    The Proceedings of Conference of Kansai Branch, 2007, 2007, 2007, The Japan Society of Mechanical Engineers
  • 1315 Micro factory that considered machine tool characteristic
    新山 徹; 青山 栄一; 廣垣 俊樹
    The Proceedings of Conference of Kansai Branch, 2007, 2007, 2007, The Japan Society of Mechanical Engineers
  • 422 Basic Study on Transmitted Characteristics of Gear Sound at Gearing System
    城間 寛; 青山 栄一; 廣垣 俊樹
    The Proceedings of Conference of Kansai Branch, 2007, 2007, 2007, The Japan Society of Mechanical Engineers
  • 418 Fundamental Study of Relationship between gear sound and background noise of the car
    上西 康弘; 廣垣 俊樹; 青山 栄一; 宮澤 昌也; 蘭 貴之
    The Proceedings of Conference of Kansai Branch, 2007, 2007, 2007, The Japan Society of Mechanical Engineers
  • 310 Strength Characteristics of Carbon-Cotton Hybrid Reinforced Plastics Gears
    KAWASAKI Yoshihiro; AOYAMA Eiichi; HIROGAKI Toshiki; ISE Teturou; HARA Eiji; TANIUCHI Hirokazu
    The Proceedings of the Symposium on Motion and Power Transmission, 2007, 2007, 2007, The Japan Society of Mechanical Engineers
  • Creation of tool path from photograph image for reverse engineering
    Kita Masahiro; Aoyama Eiichi; Hirogaki Toshiki; Ogawa Keiji; Nobe Hiromichi
    Proceedings of JSPE Semestrial Meeting, 2006, 2006, 2006, The Japan Society for Precision Engineering
  • Consideration of ball end mill tool route for creation of domed
    Nagasawa Masayuki; Hirogaki Toshiki; Aoyama Eiichi; Nobe Hiromichi; Ogawa Keiichi
    Proceedings of JSPE Semestrial Meeting, 2006, 2006, 2006, The Japan Society for Precision Engineering
  • Micro-drilled Hole Quality Evaluation for Multi-layer or Thickness copper foil PWB
    Aoyama Eiichi; Hirogaki Toshiki; Ogawa Keiji; Mori Kenichi; Itagaki Yusuke
    Proceedings of JSPE Semestrial Meeting, 2006, 2006, 2006, The Japan Society for Precision Engineering
  • Quality evaluation of minimum diameter drill hole which uses super-high-speed spindle in PWB's processing
    Hirogaki Toshiki; Aoyama Eiichi; Ogawa Keiji; Otsuka Tsuyoshi
    Proceedings of JSPE Semestrial Meeting, 2006, 2006, 2006, The Japan Society for Precision Engineering
  • Development of CAD Datares experimental system in reverse engineering
    Kita Masahiro; Aoyama Eiichi; Hirogaki Toshiki; Ogawa Keiji; Nobe Hiromichi
    Proceedings of JSPE Semestrial Meeting, 2006, 2006, 2006, The Japan Society for Precision Engineering
  • Gear Sound Level Audibility In The Background Noise in Vehicles
    Uenishi Yasuhiro; Hirogaki Toshiki; Aoyama Eiichi; Miyazawa Masaya
    Proceedings of JSPE Semestrial Meeting, 2006, 2006, 2006, The Japan Society for Precision Engineering
  • A Study for Bending Fracture Characteristic of FRP Gear Focused on Fracture Position
    Taniuchi Hirokazu; Aoyama Eiichi; Hirogaki Toshiki; Hara Eiji; Ise Tetsuro
    Proceedings of JSPE Semestrial Meeting, 2006, 2006, 2006, The Japan Society for Precision Engineering
  • Catalog Mining for new knowledge discovery concerning cutting condition decision
    Kitamura Tasuku; Hirogaki Toshiki; Aoyama Eiichi; Osaki Miho; Ogawa Keiji; Kawai Teppei
    Proceedings of JSPE Semestrial Meeting, 2006, 2006, 2006, The Japan Society for Precision Engineering
  • Study on CAM System in Considering Heat Damage as Printed Wiring Boards Hole is Drilled
    Hirogaki Toshiki; Aoyama Eiichi; Ogawa Keiji; Matumura Mitutaka; Sumida Seita
    Proceedings of JSPE Semestrial Meeting, 2006, 2006, 2006, The Japan Society for Precision Engineering
  • 1515 Study on CAM System for Printed Wiring Boards : Decision method for Tool Path in Cosidering Heat Damage
    Hirogaki Toshiki; Aoyama Eiichi; Ogawa Keiji; Matumura Mitutaka; Sumida Seita
    The Proceedings of Conference of Kansai Branch, 2006, 2006, 2006, The Japan Society of Mechanical Engineers
  • 1514 Application of movement characteristic of autonomous, decentralized taxi to AGV
    OGAWA Keiji; HIROGAKI Toshiki; AOYAMA Eiichi; OKIMURA Yuuki; YONEDA Tetsurou
    The Proceedings of Conference of Kansai Branch, 2006, 2006, 2006, The Japan Society of Mechanical Engineers
  • 1513 Study on Data Mining from Tool Catalog
    KITAMURA Tasuku; HIROGAKI Toshiki; AOYAMA Eiichi; Osaki Miho; OGAWA Keiji; KAWAI Teppei
    The Proceedings of Conference of Kansai Branch, 2006, 2006, 2006, The Japan Society of Mechanical Engineers
  • 1422 Study on the Order of Fixed Cycle Drilling for Length Hole of PWB
    HIROGAKI Toshiki; AOYAMA Eiichi; YOSHIDA Norihiro
    The Proceedings of Conference of Kansai Branch, 2006, 2006, 2006, The Japan Society of Mechanical Engineers
  • 1421 Quality Control of Micro-drilled Hole of PWBs
    AOYAMA Eiichi; HIROGAKI Toshiki; OTSUKA Tsuyoshi
    The Proceedings of Conference of Kansai Branch, 2006, 2006, 2006, The Japan Society of Mechanical Engineers
  • 1420 Micro-drilled Hole Quality Evaluation for Multi-layers PWBs
    AOYAMA Eiichi; HIROGAKI Toshiki; OGAWA Keiji; MORI Kennichi; ITAGAKI Yuusuke
    The Proceedings of Conference of Kansai Branch, 2006, 2006, 2006, The Japan Society of Mechanical Engineers
  • 1419 A Proposal of CAM System using Cutting-RP
    TANAKA Shohei; AOYAMA Eiichi; HIROGAKI Tosiki; OGAWA Keiji; YAGI Ryoichi
    The Proceedings of Conference of Kansai Branch, 2006, 2006, 2006, The Japan Society of Mechanical Engineers
  • 1416 Quality of machined surface in externals router processing of PWBs
    AOYAMA Eiiti; HIROGAKI Toshiki; SHINDO Rikima
    The Proceedings of Conference of Kansai Branch, 2006, 2006, 2006, The Japan Society of Mechanical Engineers
  • 1415 Evaluation of quality in cylindrical finished surface by ball end-milling
    SUEDA Hidenori; MACHINAKA Ryoji; HIROGAKI Toshiki; AOYAMA Eiichi; OGAWA Keiji
    The Proceedings of Conference of Kansai Branch, 2006, 2006, 2006, The Japan Society of Mechanical Engineers
  • 1413 Manufacturing the Makyoh with a Machining center
    SHIOMI Tomohiro; AOYAMA Eiichi; HIROGAKI Toshiki; OGAWA Keiji
    The Proceedings of Conference of Kansai Branch, 2006, 2006, 2006, The Japan Society of Mechanical Engineers
  • 1318 A Study on Vibration Characteristic of Hobed FRP Gear
    AOYAMA Haruka; HIROGAKI Toshiki; AOYAMA Eiichi; HARA Eiji; ISE Tetsuro
    The Proceedings of Conference of Kansai Branch, 2006, 2006, 2006, The Japan Society of Mechanical Engineers
  • 1317 Fundamental Study of Relationship between gear sound and background noise of the car
    UENISHI Yasuhiro; HIROGAKI Toshiki; AOYAMA Eiichi; MIYAZAWA Masaya
    The Proceedings of Conference of Kansai Branch, 2006, 2006, 2006, The Japan Society of Mechanical Engineers
  • 1314 Fundamental Study of Tooth Contact Monitor using by Thermography
    UENISHI Yasuhiro; HIROGAKI Toshiki; AOYAMA Eiichi; MIYAZAWA Masaya; IIDA Takahiro
    The Proceedings of Conference of Kansai Branch, 2006, 2006, 2006, The Japan Society of Mechanical Engineers
  • 1313 A Study for Bending Fracture Characteristic of Hobbing FRP Gear
    TANIUCHI Hirokazu; HIROGAKI Toshiki; AOYAMA Eiichi; HARA Eiji; ISE Tetsuro
    The Proceedings of Conference of Kansai Branch, 2006, 2006, 2006, The Japan Society of Mechanical Engineers
  • Quantify of Stripes in Cylindrical Finished Surface by Ball-Nosed End Mill
    Machinaka Ryoji; Hirogaki Toshiki; Aoyama Eiichi; Ogawa Keiji; Nobe Hiromichi
    Proceedings of JSPE Semestrial Meeting, 2005, 2005, 2005, The Japan Society for Precision Engineering
  • Super-finishing with fine grit super-abrasive stone
    Naka Sachiko; Aoyama Eiichi; Hirogaki Toshiki; Onchi Yoshiaki; Ogawa Keiji; Oku Kentaro
    Proceedings of JSPE Semestrial Meeting, 2005, 2005, 2005, The Japan Society for Precision Engineering
  • Investigation of Surface Topography by Learning from Makyoh
    Ogawa Keiji; Hirogaki Toshiki; Aoyama Eiichi
    Proceedings of JSPE Semestrial Meeting, 2005, 2005, 2005, The Japan Society for Precision Engineering
  • Acquisition and analysis of processing information in cutting RP CAM system
    Yagi Ryouichi; Hirogaki Toshiki; Aoyama Eiichi; Kita Masahiro; Ogawa Keiji
    Proceedings of JSPE Semestrial Meeting, 2005, 2005, 2005, The Japan Society for Precision Engineering
  • CAM System Based on Constant Drill Temperature for Drilling in Printed Wiring Board
    Yoshida Norihiro; Hirogaki Toshiki; Aoyama Eiichi; Ogawa Keiji; Matumura Mitutaka
    Proceedings of JSPE Semestrial Meeting, 2005, 2005, 2005, The Japan Society for Precision Engineering
  • Tool selection in manufacturing system supported by data mining
    Kawai Teppei; Hirogaki Tosiki; Aoyama Eiichi; Osaki Miho; Ogawa Keizi
    Proceedings of JSPE Semestrial Meeting, 2005, 2005, 2005, The Japan Society for Precision Engineering
  • Improvement of Micro-drilling Quality on Multi-layer PWBs Using Data-mining method
    hirogaki toshiki; Aoyama Eiichi; ogawa keiji; mori kenichi
    Proceedings of JIEP Annual Meeting, 2005, 2005, 2005, The Japan Institute of Electronics Packaging
  • Evaluation of Drilling Conditions based on monitoring using Thermography
    Hirogaki Toshiki; Aoyama Eiichi; Ogawa Keiji; Matsumura Mitutaka; Nakagawa Heisaburo
    Proceedings of JIEP Annual Meeting, 2005, 2005, 2005, The Japan Institute of Electronics Packaging
  • 1317 Proposal of manufacturing system which applies movement characteristic of taxi
    Okimura Yuuki; AOYAMA Eiichi; HIROGAKI Toshiki; OGAWA Keiji
    The Proceedings of Conference of Kansai Branch, 2005, 2005, 2005, The Japan Society of Mechanical Engineers
  • 1316 Proposal of manufacturing system supported by data mining
    KAWAI Teppei; HIROGAKI Toshiki; AOYAMA Eiichi; OHSAKI Miho; OGAWA Keiji
    The Proceedings of Conference of Kansai Branch, 2005, 2005, 2005, The Japan Society of Mechanical Engineers
  • 1315 Development of Small Multifunctional Machine Tool for Cell Production System
    FUJIOKA Mikihito; HIROGAKI Toshiki; AOYAMA Eiichi; OGAWA Keiji; IWAMA Masatoshi
    The Proceedings of Conference of Kansai Branch, 2005, 2005, 2005, The Japan Society of Mechanical Engineers
  • 1314 Development of CAM system using cutting RP : The characteristic of the RP material, and acquisition and analysis of processing information
    YAGI Ryoichi; HIROGAKI Toshiki; AOYAMA Eiichi; OGAWA Keiji
    The Proceedings of Conference of Kansai Branch, 2005, 2005, 2005, The Japan Society of Mechanical Engineers
  • 1305 Low Noise Gear Design Method Considering Human Engineering
    MIYAZAWA Masaya; HIROGAKI Toshiki; AOYAMA Eiichi; UENISHI Yasuhiro; NAKANO Yuusuke
    The Proceedings of Conference of Kansai Branch, 2005, 2005, 2005, The Japan Society of Mechanical Engineers
  • 628 Manufacturing and Controlling of Bamboo Fibers Obtained with a Machining Center
    TOMIOKA Yoshihiro; AOYAMA Eiichi; HIROGAKI Toshiki; OGAWA Keiji; SHIOMI Tomohiro
    学術講演会講演論文集, 2005, 2005, 2005, 日本材料学会
  • 317 Factor analysis of quality of micro-drilling hole in multilayer PWB that uses data mining
    HIROGAKI Toshiki; AOYAMA Eiichi; OGAWA Keiji; MORI Keniti; SHINDO Rikima
    学術講演会講演論文集, 2005, 2005, 2005, 日本材料学会
  • 318 Application of GFRP Plate to Build-up Layer of Multi Layer Printed Wiring Boards for Cu Direct Blind Via Hole Drilling using CO_2 Laser
    OGAWA Keiji; HIROGAKI Toshiki; AOYAMA Eiichi; DOI Nobuyuki
    学術講演会講演論文集, 2005, 2005, 2005, 日本材料学会
  • 537 Teeth Strength Properties of FRP Gears produced by Hob Cut
    AOYAMA Eiichi; HIROGAKI Toshiki; SUGIMURA Kazuya; ISE Tetsurou; HARA Eiji; YAGURA Yoshinori; AOYAMA Haruka
    学術講演会講演論文集, 2005, 2005, 2005, 日本材料学会
  • 赤外線サーモグラフィーを用いたドリル温度のモニタリングによる穴壁面品質の管理
    青山 栄一; 廣垣 俊樹; 小川 圭二
    マイクロエレクトロニクスシンポジウム論文集, 14 Oct. 2004, 14 Oct. 2004, 14 Oct. 2004, エレクトロニクス実装学会
  • 炭酸ガスレーザによるCuダイレクト加工における穴品質の改善
    廣垣 俊樹; 青山 栄一; 小川 圭二
    マイクロエレクトロニクスシンポジウム論文集, 14 Oct. 2004, 14 Oct. 2004, 14 Oct. 2004, エレクトロニクス実装学会
  • データマイニングによるバイアホールの層間回路接続信頼性支配要因の探索
    青山 栄一; 廣垣 俊樹; 小川 圭二
    マイクロエレクトロニクスシンポジウム論文集, 14 Oct. 2004, 14 Oct. 2004, 14 Oct. 2004, エレクトロニクス実装学会
  • CAM system of drilling for printed wiring boards using TSP considered processing time
    Hirogaki Toshiki
    Proceedings of JSPE Semestrial Meeting, 2004, 2004, 2004, The Japan Society for Precision Engineering
  • Reconsideration of manufacturing system based on traffic engineering attracted to taxi problem
    Aoyama Eiichi; Hirogaki Toshiki; Ogawa Keiji; Okimura Yuki
    Proceedings of JSPE Semestrial Meeting, 2004, 2004, 2004, The Japan Society for Precision Engineering
  • Data mining of micro-drilling quality on multi-layer printed wiring boards
    Hirogaki Toshiki
    Proceedings of JSPE Semestrial Meeting, 2004, 2004, 2004, The Japan Society for Precision Engineering
  • 412 Study of CAM System for Printed Wiring Boards : Decision method for optimization moving route applied TSP
    AOYAMA Eiichi; HIROGAKI Toshiki; HASHIMOTO Naohide; OGAWA Keiji; MATUMURA Mitutaka
    The Proceedings of Conference of Kansai Branch, 2004, 2004, 2004, The Japan Society of Mechanical Engineers
  • 411 Investigation of Application of Taxi Problem to Manufacturing System
    OGAWA Keiji; HIROGAKI Toshiki; AOYAMA Eiichi
    The Proceedings of Conference of Kansai Branch, 2004, 2004, 2004, The Japan Society of Mechanical Engineers
  • 204 Super-low-pressure control process for nano-surface generation by fixed abrasive grain
    AOYAMA Eiichi; HIROGAKI Toshiki; ONCHI Yoshiaki; OKU Kentaro; OGAWA Keiji
    The Proceedings of Conference of Kansai Branch, 2004, 2004, 2004, The Japan Society of Mechanical Engineers
  • Development of CAM for Printed Wiring Boards using TSP Considered Processing Time
    MATUMURA Mitutaka; HIROGAKI Toshiki; AOYAMA Eiichi; OGAWA Keiji; HASHIMOTO Naohide
    The Proceedings of The Manufacturing & Machine Tool Conference, 2004, 2004, 2004, The Japan Society of Mechanical Engineers
  • Development of Super Finishing Machine to Create Nano Mirror Surface Using Ultra Low Stone Pressure
    OKU Kentaro; HIROGAKI Toshiki; AOYAMA Eiichi; OGAWA Keiji; ONCHI Yoshiaki
    The Proceedings of The Manufacturing & Machine Tool Conference, 2004, 2004, 2004, The Japan Society of Mechanical Engineers
  • Factor Analysis of Circuit Connection Reliability for Laser-drilled Blind Via Hole on Printed Wiring Boards Using Data-mining Method
    OGAWA Keiji; HIROGAKI Toshiki; AOYAMA Eiichi; MAEDA Shinji
    The Proceedings of The Manufacturing & Machine Tool Conference, 2004, 2004, 2004, The Japan Society of Mechanical Engineers
  • Evaluation of Cu Direct Laser-drillng of PWB Using Infrared Thermography
    DOI Nobuyuki; HIROGAKI Toshiki; AOYAMA Eiichi; OGAWA Keiji; MINAGI Ryu
    The Proceedings of The Manufacturing & Machine Tool Conference, 2004, 2004, 2004, The Japan Society of Mechanical Engineers
  • Calculation Method for Fatigue Strength of Power Transmission Gear Made of Cotton Woven Cloth Reinforced Phenolic Resin Laminate
    HIROGAKI Toshiki; AOYAMA Eiichi; SUGIMURA Kazuya; YAGURA Yoshinori
    The Proceedings of the Symposium on Motion and Power Transmission, 2004, 2004, 2004, The Japan Society of Mechanical Engineers
  • Development of noncontact summary measuring method of flash temperature distribution on tooth surface
    UENISHI Yasuhiro; AOYAMA Eiichi; HIROGAKI Toshiki; KATAYAMA Tsutao; NAKANO Yuusuke; TANGE Hiromi
    The Proceedings of the Symposium on Motion and Power Transmission, 2004, 2004, 2004, The Japan Society of Mechanical Engineers
  • 607 FRP歯車における設計システムの開発 : 積層材料を用いた歯車における曲げ疲労強度の算定(破壊と破壊力学-I)(複合材料の産業応用)(オーガナイスドセッション6)
    青山 栄一; 片山 傅生; 廣垣 俊樹; 杉村 和哉; 矢倉 吉典
    学術講演会講演論文集, 2003, 2003, 2003, 日本材料学会
  • Estimating System of Gear Noise using Thermography
    UENISHI Yasuhiro; NAKANO Yuusuke; TANGE Hiromi; HIROGAKI Toshiki; AOYAMA Eiichi; KATAYAMA Tsutao
    東海支部地区講演会講演論文集, 2003, 2003, 2003, 日本機械学会東海支部
  • AFRPプリント基板のレーザ加工穴の品質評価:炭酸ガスレーザによるブラインドバイアホールの形成
    廣垣 俊樹; 中川 平三郎; 中村 隆英; 青山 栄一; 片山 傅生; 井上 久弘
    精密工学会大会学術講演会講演論文集, 01 Mar. 2002, 01 Mar. 2002, 01 Mar. 2002
  • Evaluation system of sideband noise of mesh frequency in bevel gears
    UENISHI Yasuhiro; HIROGAKI Toshiki; AOYAMA Eiichi; Katayama Tsutao; NAKATA Yasuhiro; TANGE Hiromi
    The Proceedings of the Machine Design and Tribology Division meeting in JSME, 2002, 2002, 2002, The Japan Society of Mechanical Engineers
  • アラミド繊維強化プリント基板の小径ドリル加工
    廣垣 俊樹; 中川 平三郎; 中村 隆英; 青山 栄一; 片山 傳生; 井上 久弘
    精密工学会大会学術講演会講演論文集, 01 Sep. 2001, 01 Sep. 2001, 01 Sep. 2001
  • K-0916 Performance Evaluation of FRP Gear : Mechanical Property and Vibration Characteristic in Driving
    Aoyama Eiichi; Katayama Tsutao; Hirogaki Toshiki; Sugimura Kazuya; Kojima Jun; Iwasaki Shinya
    The proceedings of the JSME annual meeting, 2001, 2001, 2001, The Japan Society of Mechanical Engineers
  • F-1030 Non-contact measurement method of the antifreezing admixture
    KATAYAMA Tsutao; AOYAMA Eiichi; NAKAYAMA Minoru; HORIUCHI Atsushi; HOSOKAWA Yoshinori; TANAKA Mototsugu
    The proceedings of the JSME annual meeting, 2001, 2001, 2001, The Japan Society of Mechanical Engineers
  • F-0915 Effects of Microscopic Structure of Granular Agglomerate in Ultra-high Molecular Weight Polyethylene (UHMWPE) on Delamination of Knee Joint Component
    SHIBATA Nobuyuki; TOMITA Naohide; ONMORI Naoki; KATO Koji; IKEUCHI Ken; AOYAMA Eiichi
    The proceedings of the JSME annual meeting, 2001, 2001, 2001, The Japan Society of Mechanical Engineers
  • K-0913 2-component mixing using the vertical vibration : The effect of the particle size
    KATAYAMA Tutao; AOYAMA Eiichi; YAMAMOTO Koji
    The proceedings of the JSME annual meeting, 2001, 2001, 2001, The Japan Society of Mechanical Engineers
  • K-0903 Development of FRP for compressive load support as a biomimetic design of cortical bone
    KATAYAMA Tutao; AOYAMA Eiichi; TAKEUCHI Yasuo
    The proceedings of the JSME annual meeting, 2001, 2001, 2001, The Japan Society of Mechanical Engineers
  • 117 The proposal of the finite element model for conceptual design of the construction machine cab : Simplified FE model for spot-welded frame-panel structure by using beam element
    NAKAJIMA Masayoshi; KATAYAMA Tsutao; AOYAMA Eiichi; HIROGAKI Toshiki; ANDOH Hiroaki; ENOKI Shinichi
    The Proceedings of Conference of Hokkaido Branch, 2001, 2001, 2001, The Japan Society of Mechanical Engineers
  • 116 Meshing Characteristics at Impact of the Spiral Bevel Gears
    TANGE Hiromi; AOYAMA Eiichi; KATAYAMA Tsutao; HIROGAKI Toshiki; UENISHI Yasuhiro; NAKATA Yasuhiro
    The Proceedings of Conference of Hokkaido Branch, 2001, 2001, 2001, The Japan Society of Mechanical Engineers
  • Observation of deformation at grain boundary in UHMWPE joint component
    KATO Koji; TOMITA Naohide; ONMORI Naoki; SHIBATA Nobuyuki; AOYAMA Eiichi; KATAYAMA Tsutao
    Proceedings of the JSME Bioengineering Conference and Seminar, 2000, 2000, 2000, The Japan Society of Mechanical Engineers
  • 613 Vilbratioii Estimation of Spiral Bevel Gears by Monitoring the Exterior Vibration
    AOYAMA Eiichi; HIROGAKI Toshiki; UENISHI Yasuhiro; YAMADA Takeshi; NAKATA Yasuhiro
    The Proceedings of Conference of Tokai Branch, 2000, 2000, 2000, The Japan Society of Mechanical Engineers
  • 812 Fatigue characteristic of UHMWPE added vitamin E
    Yamamoto Koji; Tomita Naohide; Hiyoshi Nobuyuki; Onmori Naoki; Ishimoto Yosiyuki; Aoyama Eiiti
    The Proceedings of Conference of Kansai Branch, 2000, 2000, 2000, The Japan Society of Mechanical Engineers
  • 420 Vibration Characteristics of Spiral Bevel Gears : Rotational Vibration of Gears and Meshing Transmission Error
    NAKATA Yasuhiro; AOYAMA Eiichi; HIROGAKI Toshiki; UENISHI Yasuhiro; YAMADA Takeshi
    The Proceedings of Conference of Kansai Branch, 2000, 2000, 2000, The Japan Society of Mechanical Engineers
  • 419 A study on meshing transmission error of spur gear used inverse problems
    AOYAMA Eiichi; HIROGAKI Toshiki; UENISHI Yasuhiro; KOU Zaigaku; KOJIMA Jun
    The Proceedings of Conference of Kansai Branch, 2000, 2000, 2000, The Japan Society of Mechanical Engineers
  • 224 Study on Small-diameter Drilling of the GFRP Printed Wiring Board : Effect of the Drill Wear on the Drilled Hole Quality
    AOYAMA Eiichi; HIROGAKI Toshiki; NOBE Hiromichi; Nishizawa Mitsuru; INOUE Hisahiro; KATAYAMA Tsutao
    The Proceedings of Conference of Kansai Branch, 2000, 2000, 2000, The Japan Society of Mechanical Engineers
  • 217 Fundamental Investigation The Falling Mechanism of Abrasive Grain of CBN Super-finishing Stone
    YAMASHIRO Atsushi; AOYAMA Eiichi; ONCHI Yoshiaki; HIROGAKI Toshiki; YANAGITANI Kosuke
    The Proceedings of Conference of Kansai Branch, 2000, 2000, 2000, The Japan Society of Mechanical Engineers
  • 106 The study on minute diameter drilling on the stainless steel board
    AOYAMA Eiichi; NISHUZAWA Mitsuru; HUJIWARA Hisakazu; OHYAMA Hiroshi; KATAYAMA Tsutao
    The Proceedings of the Materials and processing conference, 2000, 2000, 2000, The Japan Society of Mechanical Engineers
  • 205 人工膝関節用超高分子量ポリエチレンのデラミネーション破壊に及ぼす諸因子の影響
    山本 浩司; 富田 直秀; 御守 直樹; 柴田 延幸; 青山 栄一; 片山 傅生
    学術講演会講演論文集, 2000, 2000, 2000, 日本材料学会
  • Damage mechanism in the small-diameter drilling of the GFRP printed wiring board
    AOYAMA Eiichi; HIROGAKI Toshiki; INOUE Hisahiro; NOBE Hiromichi; YAMURA Kouichi; GUNJIMA Munehisa; KATAYAMA Tsutao
    複合材料シンポジウム講演要旨集, Jan. 1999, Jan. 1999, Jan. 1999
  • 504 レーザを用いたプリント基板の小径ブラインドホール加工 : アラミドおよびガラス不織布強化基板の比較
    廣垣 俊樹; 井上 久弘; 青山 栄一; 野辺 弘道; 小川 圭二; 前田 伸治; 片山 傳生
    学術講演会講演論文集, 1998, 1998, 1998, 日本材料学会
  • 111 プリント基板用 GFRP 積層材の小径ドリル加工時の損傷評価とその対策
    野辺 弘道; 青山 栄一; 廣垣 俊樹; 片山 傳生
    学術講演会講演論文集, 1997, 1997, 1997, 日本材料学会
  • 110 プリント基板用 GFRP 積層材の小径ドリル加工時の損傷幅に対する要因
    奥野 泰和; 青山 栄一; 廣垣 俊樹; 井上 久弘; 野辺 弘道; 郡嶋 宗久; 片山 傳生
    学術講演会講演論文集, 1997, 1997, 1997, 日本材料学会

Industrial Property Rights

  • Patent right
    びびり振動抑制方法
    廣垣 俊樹, 青山 栄一, 塩田 亮祐, 青谷 凱斗
    特願2016-096669, 特開2017-202555, 特許第6727578号, 学校法人同志社
  • Patent right
    びびり振動抑制方法およびびびり振動抑制システム
    廣垣 俊樹, 青山 栄一, 尾崎 信利
    特願2018-184240, 特開2020-049626, 学校法人同志社
  • Patent right
    遊星歯車装置
    中川 正夫, 廣垣 俊樹, 青山 栄一, 西田 大
    特願2017-220013, 特開2019-090487, 学校法人同志社
  • Patent right
    研磨用ナノファイバー集積体およびその製造方法
    池ヶ谷 守彦, 曽田 浩義, 廣垣 俊樹, 青山 栄一, 呉 魏
    JP2017042926, WO2019-106774, エム・テックス株式会社
  • Patent right
    研磨装置および研磨方法
    廣垣 俊樹, 青山 栄一, 馬 雷
    特願2015-014627, 特開2016-137553, 学校法人同志社
  • Patent right
    レーザフォーミング加工方法およびレーザフォーミング加工装置
    廣垣 俊樹, 青山 栄一, 織田 良輔
    特願2014-181928, 特開2016-055302, 学校法人同志社
  • Patent right
    噛み合い起振力の測定方法
    廣垣 俊樹, 青山 栄一, 森本 裕太, 上西 康弘
    特願2011-159738, 特開2013-024723, 特許第5820177号, 学校法人同志社, ダイハツ工業株式会社
  • Patent right
    回転2軸運動の同期精度の診断方法
    廣垣 俊樹, 青山 栄一, 呉 魏
    特願2011-222764, 特開2012-101348, 特許第5757526号, 学校法人同志社
  • Patent right
    歯車の歯当たり検査方法および検査装置
    臼井 徳貴, 松原 正己, 上西 康弘, 廣垣 俊樹, 青山 栄一, 永田 昌希
    特願2009-115830, 特開2010-266244, 特許第5161149号, 日産自動車株式会社, ジヤトコ株式会社, 学校法人同志社
  • Patent right
    プリント基板用穴あけ加工機およびそれを用いたプリント基板の穴あけ加工条件決定方法
    廣垣 俊樹, 青山 栄一, 前野 伸
    特願2004-286690, 特開2006-095656, 特許第4833535号, 学校法人同志社, 株式会社タケウチ
  • Patent right
    歯車の歯当り評価方法
    上西 康弘, 松原 正己, 臼井 徳貴, 廣垣 俊樹, 青山 栄一, 飯田 剛弘
    特願2007-021483, 特開2008-185549, 特許第4733652号, ジヤトコ株式会社, 日産自動車株式会社, 学校法人同志社
  • Patent right
    プリント基板の穴あけ方法
    廣垣 俊樹, 青山 栄一
    特願2009-168820, 特開2011-023643, 学校法人同志社
  • Patent right
    被削材の切削方法
    廣垣 俊樹, 青山 栄一
    特願2009-168821, 特開2011-022898, 学校法人同志社
  • Patent right
    はすば歯車の最適歯数設定方法及びはすば歯車
    上西 康弘, 廣垣 俊樹, 青山 栄一, 中野 裕介
    特願2005-270261, 特開2007-078142, 特許第4674140号, ジヤトコ株式会社, 学校法人同志社
  • Patent right
    歯車の歯当り評価方法及び装置
    上西 康弘, 廣垣 俊樹, 青山 栄一
    特願2007-157916, 特開2007-263978, 特許第4457126号, ジヤトコ株式会社, 学校法人同志社
  • Patent right
    金属表面状態検出装置及び検出方法
    廣垣 俊樹, 青山 栄一
    特願2004-072042, 特開2005-257585, 学校法人同志社
  • Patent right
    歯車の歯当り評価方法及び装置並びに歯車の噛み合い起振力推定方法及び装置
    上西 康弘, 廣垣 俊樹, 青山 栄一
    特願2004-028560, 特開2005-221347, ジヤトコ株式会社, 学校法人同志社
  • Patent right
    FRP製歯車を用いた歯車機構及び該歯車機構を備えた機械システム
    廣垣 俊樹, 青山 栄一, 片山 傳生, 杉村 和哉
    特願2003-322088, 特開2005-090557, 学校法人同志社, 株式会社イシダ

Research Projects

  • Study on Transmitting Behavior of Spiral Bevel Gears
    Competitive research funding
  • Study on Low Current Air Plasma Arc Cutting of Thin Metal Plates
    Competitive research funding
  • Study on fine drilling of FRP.
    Competitive research funding
  • まがりばかさ歯車の動力伝達特性に関する研究
    Competitive research funding
  • 金属薄板の小容量エアプラズマアーク切断に関する研究
    Competitive research funding
  • 複合材料の精密穴あけ加工に関する研究
    Competitive research funding

Research Seeds

  • Investigation of End-mill Condition Decision Methodology Based on Data Mining for Tool Catalog Data Base
    Research Fields: Machinery and Measuring Equipment
    Affiliation/Name: Toshiki Hirogaki:Eiichi Aoyama

    Patent Information: 特願 2003-290325
  • Fabrication of Binder-free Green Composites Using Bamboo Fibers Extracted with a Machining Center
    Research Fields: Machinery and Measuring Equipment, Chemicals, Nanotechnology and Materials, Environment and Energy
    Affiliation/Name: Toshiki Hirogaki:Eiichi Aoyama

  • Development of automation technology based on Motion Control of Rolling Ball by Operating the Working Plate with a Dual-arm Robot
    Research Fields: Machinery and Measuring Equipment
    Affiliation/Name: Toshiki Hirogaki:Eiichi Aoyama

  • Technology to Diagnose the State of the Mechanical Elements and the Process by Infrared Thermography Image
    Research Fields: Machinery and Measuring Equipment
    Affiliation/Name: Toshiki Hirogaki:Eiichi Aoyama

  • Autonomous Conveyance Control of AGV Based on Knowledge of Taxi Transportation rules
    Research Fields: Machinery and Measuring Equipment
    Affiliation/Name: Toshiki Hirogaki:Eiichi Aoyama