| MATSUOKA Takashi |  |
| Faculty of Science and Engineering Department of Mechanical and Systems Engineering | |
| Professor |
Last Updated :2024/10/12
Researcher Profile and Settings
researchmap
Research Areas
- Nanotechnology/Materials / Composite materials and interfaces
- Manufacturing technology (mechanical, electrical/electronic, chemical engineering) / Machine elements and tribology
- Manufacturing technology (mechanical, electrical/electronic, chemical engineering) / Design engineering
Education
- Doshisha University, 工学研究科, 機械工学専攻, - 1984
- Doshisha University, Graduate School, Division of Engineering, - 1984
- Doshisha University, 工学研究科, 機械工学専攻, - 1981
- Doshisha University, Graduate School, Division of Engineering, - 1981
- Doshisha University, 工学部, 機械工学科, - 1979
- Doshisha University, Faculty of Engineering, - 1979
Degree
Association Memberships
Committee Memberships
- 評議員, 2007 - 2011, 日本複合材料学会, Society, 日本複合材料学会
- 関西支部商議員, 2003 - , 日本設計工学会, Society, 日本設計工学会
- 理事, 2000 - , 関西潤滑懇談会, Society, 関西潤滑懇談会
- 関西支部商議員, - , 日本機械学会, Society, 日本機械学会
- 理事2003-2005、評議員1999-2003、編集委員2000、査読委員2000-、複合材料部門委員会幹事1999-2009, - , 日本材料学会, Society, 日本材料学会
Awards
- Best Paper Award of ASPEN2011
2010 - 日本トライボロジー学会 論文賞
2008, Japan - 繊維機械学会賞 技術賞
2004, Japan - 46th FRP CON-EX2001協会賞（論文賞）
2001, Japan
Published Papers
- "Friction and wear properties of polyacrylonitrile-and pitch-based carbon fiber-reinforced polymer matrix composites containing silicon carbide nanoparticles"
Kimiyoshi Naito; Morimasa Nakamura; Takashi Matsuoka
Polymer Composites, 44 2405 - 2416, Apr. 2023 - Hydrodynamic Performance Produced by Nanotexturing in Submicrometer Clearance With Surface Roughness
Tomoko Hirayama; Heinosuke Shiotani; Kazuki Yamada; Naoki Yamashita; Takashi Matsuoka; Hiroshi Sawada; Kosuke Kawahara
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, ASME, 137(1), Jan. 2015, Scientific journal - Wear and Friction Properties of Mg-Zn-Y Alloy with Dispersion of Quasi-Crystalline Phase
Hidetoshi Somekawa; Atsushi Shimoda; Tomoko Hirayama; Takashi Matsuoka; Toshiji Mukai
MATERIALS TRANSACTIONS, JAPAN INST METALS, 55(1) 216 - 219, Jan. 2014, Scientific journal - Increase of film thickness by nano-texturing under elastohydrodynamic lubrication
Tomoko Hirayama; Mitsutaka Ikeda; Toshiteru Suzuki; Takashi Matsuoka; Hiroshi Sawada; Kosuke Kawahara; Shunji Noguchi
5th World Tribology Congress, WTC 2013, Politecnico di Torino (DIMEAS), 2 1670 , 2013, International conference proceedings - Oiliness additive adsorption onto metal surface analyzed by infrared reflection absorption spectroscopy
Ryota Kawamura; Masato Nakashima; Takashi Matsuoka; Tomoko Hirayama
5th World Tribology Congress, WTC 2013, Politecnico di Torino (DIMEAS), 4 3429 - 3431, 2013, International conference proceedings - Herringbone-grooved bearing with non-uniform grooves for high-speed spindle
Shinichi Ikeda; Yo Arakawa; Noriaki Hishida; Tomoko Hirayama; Takashi Matsuoka; Hiroshi Yabe
LUBRICATION SCIENCE, JOHN WILEY & SONS LTD, 22(9) 377 - 392, Oct. 2010, Scientific journal - Effect of Oxygen Plasma Treatment on Adhesion of Copper Plating Film to Polyimide Film for Flexible Printed Circuits
IKARI Shohei; ISHIDA Shuichi; MATSUOKA Takashi; HIRAYAMA Tomoko; KATO Kiyotaka
journal of the Japan Society for Testing Materials, The Society of Materials Science, Japan, 59(9) 705 - 711, 2010 - A method for plaiting polymer fibre around natural yarn to form composite fabric
T. Izumi; T. Matsuoka; T. Hirayama; H. Fujita; Y. Miyata; K. Fujii
HIGH PERFORMANCE STRUCTURES AND MATERIALS V, WIT PRESS, 112 187 - +, 2010, International conference proceedings - Fundamental study on oil leakage from tapered seal at the ends of fluid film bearing for precision equipments: 2nd report, theoretical study on critical speed for oil leakage
Noriaki Hishida; Masaki Hashimoto; Tomoko Hirayama; Takashi Matsuoka; Hiroshi Yabe
Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, Japan Society of Mechanical Engineers, 75(758) 2783 - 2789, 2009, Scientific journal - Fundamental study on oil leakage from tapered seal at the ends of fluid film bearing for precision equipments: 3nd report, experimental study on meniscus profile and oil leakage
Noriaki Hishida; Masaki Hashimoto; Tomoko Hirayama; Takashi Matsuoka; Hiroshi Yabe
Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, Japan Society of Mechanical Engineers, 75(758) 2790 - 2796, 2009, Scientific journal - Fundamental study on oil leakage from tapered seal at the ends of fluid film bearing for precision equipments (1st report, proposal of sealing capacity index)
Noriaki Hishida; Masaki Hashimoto; Tomoko Hirayama; Takashi Matsuoka; Hiroshi Yabe
Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, Japan Society of Mechanical Engineers, 75(751) 727 - 734, 2009, Scientific journal - Hydrodynamic Bearing with Non-Uniform Spiral Grooves for High-Speed HDD Spindle
Yo Arakawa; Shinichi Ikeda; Tomoko Hirayama; Takashi Matsuoka; Noriaki Hishida
ISCE: 2009 IEEE 13TH INTERNATIONAL SYMPOSIUM ON CONSUMER ELECTRONICS, VOLS 1 AND 2, IEEE, 159 - 160, 2009, International conference proceedings - Effects of deposition conditions on residual stress in DLC films prepared by UBM sputtering
Morimasa Nakamura; Ken-Ichi Miura; Takashi Matsuoka; Tomoko Hirayama
Zairyo/Journal of the Society of Materials Science, Japan, 57(5) 488 - 494, May 2008, Scientific journal - Pneumatic servo bearing actuator for ultraprecise positioning - Part 1: Principle and basic performance
Tomoko Hirayama; Takakazu Kitagawa; Masato Kadotani; Hiroki Danjyo; Takashi Matsuoka; Katsumi Sasaki; Hiroshi Yabe
Proceedings of the 23rd Annual Meeting of the American Society for Precision Engineering, ASPE 2008 and the 12th ICPE, 2008, International conference proceedings - Fundamental study about oil leakage from fluid film bearing
N. Hishida; T. Hirayama; T. Matsuoka; H. Yabe
Society of Tribologists and Lubrication Engineers - 2008 Annual Meeting and Exhibition, Extended Abstracts, 2008, International conference proceedings - Nano-fluctuation of Pneumatic Servo Bearing Actuator for Ultraprecise Positioning
Kitagawa Takakazu; Hirayama Tomoko; Matsuoka Takashi; Kadotani Masato; Danjyo Hiroki; Sasaki Katsumi; Yabe Hiroshi
The science and engineering review of Doshisha University, Doshisha University, 48(4) 14 - 20, Jan. 2008 - Mechanical Properties of DLC Coatings Prepared on PPS by RF Plasma CVD
Honda Atsumu; Nakamura Morimasa; Matsuoka Takashi; Hirayama Tomoko
The science and engineering review of Doshisha University, Doshisha University, 48(3) 1 - 7, Oct. 2007 - Mechanical properties of loosing natural fiber reinforced polypropylene
K. Mizuta; Y. Ichihara; T. Matsuoka; T. Hirayama; H. Fujita
WIT Transactions on the Built Environment, 85 189 - 198, 2006, International conference proceedings - Effect of precipitate morphology on tribological properties in AZ91 alloy
Akihiro Murata; Yohei Tanigawa; Takashi Matsuoka; Kazuhiko Sakaguchi; Hiroyuki Watanabe; Toshiji Mukai
Zairyo/Journal of the Society of Materials Science, Japan, Society of Materials Science Japan, 54(1) 90 - 96, 2005, Scientific journal - Effect of Twists on Mechanical Properties of Woven Fabric Composites
OTA Takao; MATSUOKA Takashi; SAKAGUCHI Kazuhiko
Proceedings of the 1992 Annual Meeting of JSME/MMD, The Japan Society of Mechanical Engineers, 2004 331 - 332, 2004 - Development of natural fiber reinforced composite materials using a loosing technique and mechanical properties
T Matsuoka; K Sakaguchi; H Fujita; H Yamamoto; M Kurasaka
HIGH PERFORMANCE STRUCTURES AND MATERIALS II, WIT PRESS, 391 - 399, 2004, International conference proceedings - K-0902 Effect of Post-cure on Mechanical Properties of Vinyl-ester Resins
OTA Takao; MATSUOKA Takashi; SAKAGUCHI Kazuhiko
The proceedings of the JSME annual meeting, The Japan Society of Mechanical Engineers, 1 485 - 486, 2001 - Relation between the quantitative evaluation of the surface texture of rubber under the reciprocating sliding condition and the frictional characteristic (Part 2)
H Fujita; H Yoneshima; K Sakaguchi; T Matsuoka
JOURNAL OF JAPANESE SOCIETY OF TRIBOLOGISTS, JAPAN SOC TRIBOLOGISTS, 46(5) 418 - 426, 2001, Scientific journal - Tribological property and fatigue of carbon fiber reinforced polyphenylene sulfide (PPS) composites under the rolling-sliding condition
T Matsuoka; K Sakaguchi; Y Hoshimoto; H Mekada; T Adachi
JOURNAL OF JAPANESE SOCIETY OF TRIBOLOGISTS, JAPAN SOC TRIBOLOGISTS, 45(10) 749 - 756, 2000, Scientific journal - Fatigue Life Estimation of FRP under Random Loading by Equivqlent Stress Amplitude Evaluation(
Minor Special Issue on Fiber Reinforced Plastics)
AMIJIMA Sadao; TANIMOTO Toshio; MATSUOKA Takashi
Journal of the Society of Materials Science, Japan, The Society of Materials Science, Japan, 30(339) 1190 - 1195, 15 Dec. 1981
MISC
- Tribological Characteristics of Polymer Materials Irradiated with Ion Beam
田中汰玖; 中村守正; 松岡敬; 奥林里子; 長町信治; 三浦健一; 小畠淳平
日本トライボロジー学会トライボロジー会議予稿集(CD-ROM), 2021, 2021 - 潤滑グリースの油膜形成に及ぼす増ちょう剤の効果 －摩擦面への増ちょう剤の付着・堆積を伴うグリース膜形成のメカニズム－
小宮広志; 下司佑馬; 八百谷昇; 平山朋子; 松岡敬; 坂本英俊
トライボロジスト, 64(1) 33 - 41, 2019 - Growth of Adsorbed Additive Layer for Further Friction Reduction
Tomoko Hirayama; Masayuki Maeda; Yuto Sasak; , Takashi Matsuoka; Hiroshi Komiya; Masahiro Hino
Lubrication Science, 2018 - カバーリング複合糸を用いた織物状CFRTPの開発
渡邉健斗; 越智昭夫; 松岡敬; 平山朋子
プラスチック成型加工, 30(3) 131 - 135, 2018 - Cross-Sectional Imaging of Boundary Lubrication Layer Formed by Fatty Acid by Means of Frequency-Modulation Atomic Force Microscopy
Tomoko Hirayama; Ryota Kawamura; Keita Fujino; Takashi Matsuoka; Hiroshi Komiya; Hiroshi Onishi
Langmuir, American Chemical Society, 33(40) 10492 - 10500, 10 Oct. 2017 - Relationship between Oil Film Thickness between Timing Chain Plate and Guide and Friction Force under Sliding Condition
宮本淳; 勝見健吾; 平山朋子; 松岡敬; 宇瀧昭彦
自動車技術会論文集, 自動車技術会, 48(5) 1067 - 1071, 2017 - Effect of Alloying Elements on Nano-ordered Wear Property of Magnesium Alloys
Takahiro Yagi; Tomoko Hirayama; Takashi Matsuoka; Hidetoshi Somekawa
Metallurgical and Materials Transactions A, SPRINGER, 48(3) 1366 - 1374, 2017 - Structural Analysis of a-C:H and a-C:H:Si Films under High-Pressure and High-Temperature by Synchrotron X-ray Diffraction
Tomoko Hirayama; Yuri Eguchi; Koichi Saeki; Takashi Matsuoka; Takumi Kikegawa
Diamond and Related Materials, 70 83 - 90, 2016 - Nano-Ordered Wear Property of Magnesium Obtaining Nanoindentation
Hidetoshi Somekawa; Kazuhiro Tomita; Miwako Toda; Tomoko Hirayama; Takashi Matsuoka
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, SPRINGER, 46A(9) 4351 - 4359, Sep. 2015 - 中性子反射率法によるトライボロジー現象理解のための展開
平山朋子; 秋元翔太; 藤森慎; 山下直輝; 松岡敬; 日野正裕
KURRI-KR, (200), 2015 - Effect of Nanotexturing on Increase in Elastohydrodynamic Lubrication Oil Film Thickness
Tomoko Hirayama; Mitsutaka Ikeda; Toshiteru Suzuki; Takashi Matsuoka; Hiroshi Sawada; Kosuke Kawahara
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, ASME, 136(3) Paper No. 031501 , Jul. 2014 - 316 Microstructual evolution during nano-scratch tests in Mg
TOMITA Kazuhiro; YOSHIKAWA Naotaka; TODA Miwako; HIRAYAMA Tomoko; MATSUOKA Takashi; SOMEKAWA Hidetoshi
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2014(89) "3 - 25", 18 Mar. 2014 - 親油性濃厚ポリマーブラシのトライボロジー特性(第2報:溶媒中における構造,共振ずり特性,摩耗メカニズム)
山下直輝; 花本直哉; 平山朋子; 平山朋子; 松岡敬; 辻井敬亘; 榊原圭太
日本トライボロジー学会トライボロジー会議予稿集(CD-ROM), 2014, 2014 - 各種その場分析法から見る添加剤吸着層の形成・脱離プロセス
平山朋子; 秋元翔太; 秋元翔太; 山下直輝; 山下直輝; 松岡敬; 日野正裕; 山田悟史
日本トライボロジー学会トライボロジー会議予稿集(CD-ROM), 2014, 2014 - 親油性濃厚ポリマーブラシのトライボロジー特性(第3報:ストライベック曲線における挙動の把握)
山下直輝; 平山朋子; 松岡敬; 小宮広志; 辻井敬亘
日本トライボロジー学会トライボロジー会議予稿集(CD-ROM), 2014, 2014 - Hydrodynamic Performance Produced by Nanotexturing in Sub-micrometer Clearance with Surface Roughness
Takashi Matsuoka; Tomoko Hirayama; Heinosuke Shiotani; Kazuki Yamada; Naoki Yamashita; Hiroshi Sawada; Kosuke Kawahara
ASME, Journal of Tribology, 137(1) Paper No. 011704 , 2014 - Variation of Oil Introduction Behaviour during Oil-in-Water Emulsion Rolling
Hironobu Nakanishi; Kozo Saiki; Tomoko Hirayama; Takashi Matsuoka
MATERIALS TRANSACTIONS, JAPAN INST METALS, 54(8) 1408 - 1415, Aug. 2013 - 親油性濃厚ポリマーブラシのトライボロジー特性(第1報)
山下直輝; 平山朋子; 松岡敬; 辻井敬亘
日本トライボロジー学会トライボロジー会議予稿集(CD-ROM), 2013, 2013 - Pneumatic Servo Bearing Actuator with Multiple Bearing Pads for Ultraprecise Positioning
Takashi Matsuoka; Shuhei Tsujimura; Yusuke Hashimoto; Tomoko Hirayama; Katsumi Sasaki
International Journal of Automation Technology, 7(5) 498 - 505, 2013 - Levitation and Deformation Characteristics of Thin Glass Substrate on Non-Contact Aerostatic Conveyer
OIWA Naoki; HIRAYAMA Tomoko; MATSUOKA Takashi; YABE Hiroshi
Journal of the Japan Society for Precision Engineering, The Japan Society for Precision Engineering, 79(6) 559 - 564, 2013 - Microstructural evolution during dry wear test in magnesium and Mg-Y alloy
Hidetoshi Somekawa; Shunsuke Maeda; Tomoko Hirayama; Takashi Matsuoka; Tadanobu Inoue; Toshiji Mukai
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, ELSEVIER SCIENCE SA, 561 371 - 377, Jan. 2013 - Understanding of the Mechanism of Oil Film Formation between Roll and Strip in Rolling Process Lubricated with O/W Emulsion
NAKANISHI Hironobu; YAMANAKA Yusuke; TOKUOKA Ryoya; HIRAYAMA Tomoko; MATSUOKA Takashi
トライボロジスト, Vol. 58, No. 6 (2013) pp. 407-414., 日本トライボロジー学会 ; 1989-, 58(6) 407 - 414, 2013 - Microstructural evolution during dry wear test in magnesium and Mg-Y alloy
Hidetoshi Somekawa; Shunsuke Maeda; Tomoko Hirayama; Takashi Matsuoka; Tadanobu Inoue; Toshiji Mukai
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, ELSEVIER SCIENCE SA, 561 371 - 377, Jan. 2013 - Microstructural evolution during dry wear test in magnesium and Mg-Y alloy
Hidetoshi Somekawa; Shunsuke Maeda; Tomoko Hirayama; Takashi Matsuoka; Tadanobu Inoue; Toshiji Mukai
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, ELSEVIER SCIENCE SA, 561 371 - 377, Jan. 2013 - Thickness and density of adsorbed additive layer on metal surface in lubricant by neutron reflectometry
Tomoko Hirayama; Takashi Torii; Yohei Konishi; Masayuki Maeda; Takashi Matsuoka; Kazuko Inoue; Masahiro Hino; Dai Yamazaki; Masayasu Takeda
TRIBOLOGY INTERNATIONAL, ELSEVIER SCI LTD, 54 100 - 105, Oct. 2012 - Thickness and density of adsorbed additive layer on metal surface in lubricant by neutron reflectometry
Tomoko Hirayama; Takashi Torii; Yohei Konishi; Masayuki Maeda; Takashi Matsuoka; Kazuko Inoue; Masahiro Hino; Dai Yamazaki; Masayasu Takeda
TRIBOLOGY INTERNATIONAL, ELSEVIER SCI LTD, 54 100 - 105, Oct. 2012 - J111023 Lubrication Effect of Surface Texturing on Machine Tools under Elasto Hydrodynamic Lubrication
IKEDA Mitsutaka; MATSUOKA Takashi; HIRAYAMA Tomoko
Mechanical Engineering Congress, Japan, The Japan Society of Mechanical Engineers, 2012 "J111023 - 1"-"J111023-3", 09 Sep. 2012 - J111032 Tribological Property of DLC/DLC Sliding under Lubricated Condition with Oiliness Additive
YAMAGUCHI Yoshifumi; MATSUOKA Takashi; HIRAYAMA Tomoko; ASANO Makoto; HANAMOTO Naoya
Mechanical Engineering Congress, Japan, The Japan Society of Mechanical Engineers, 2012 "J111032 - 1"-"J111032-4", 09 Sep. 2012 - 1312 Levitation and Deformation Characteristics of Glass Substrate on Air Conveyer System
OIWA Naoki; TSUJIUCHI Masato; HIRAYAMA Tomoko; MATSUOKA Takashi; YABE Hiroshi
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2012(87) "13 - 12", 16 Mar. 2012 - 1211 Effect of Functional Groups of Additives on Tribological Properties of Hydrogen-Containing DLC against Steel under Lubrication
KOBAYASHI Go; MATSUOKA Takashi; HIRAYAMA Tomoko
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2012(87) "12 - 11", 16 Mar. 2012 - Lubricated Friction Reduction by Spiral-Groove-Shape Nano-Texturing
Yusuke Tanaka; Kazuma Okada; Tomoko Hirayama; Takashi Matsuoka; Hiroshi Sawada; Kosuke Kawahara; Shunji Noguchi
PROCEEDINGS OF PRECISION ENGINEERING AND NANOTECHNOLOGY (ASPEN2011), TRANS TECH PUBLICATIONS LTD, 516 431 - +, 2012 - Nano-Motion X-Y Stage by Pneumatic Servo Spherical Bearing Actuators
Atsushi Sugimoto; Tomoko Hirayama; Takashi Matsuoka; Katsumi Sasaki
PROCEEDINGS OF PRECISION ENGINEERING AND NANOTECHNOLOGY (ASPEN2011), TRANS TECH PUBLICATIONS LTD, 516 281 - +, 2012 - Microstructural Evolution during Dry Wear Test in Magnesium and Mg-Y Alloy
松岡 敬; Hidetoshi Somekawa; Shunsuke Maeda; Tomoko Hirayama; Tadanobu Inoue; Toshiji Mukai
Materials Science and Engineering: A, 2012 - 往復動用リップシールのシール特性に及ぼす気液界面メニスカスの影響
松岡 敬; 荒川陽; 中嶋将人; 平山朋子; 菱田典明
設計工学会誌, 47(1) 43 - 48, 2012 - Tribological Properties of Si-Doped and Ti-Doped DLC/DLC Slidings
HARADA Yoichi; MATUSOKA Takashi; HIRAYAMA Tomoko; ASANO Makoto
Jitsumu Hyomen Gijutsu, The Surface Finishing Society of Japan, 63(1) 29 - 34, 2012 - Lubricated Friction Reduction by Spiral-Groove-Shape Nano-Texturing
Yusuke Tanaka; Kazuma Okada; Tomoko Hirayama; Takashi Matsuoka; Hiroshi Sawada; Kosuke Kawahara; Shunji Noguchi
PROCEEDINGS OF PRECISION ENGINEERING AND NANOTECHNOLOGY (ASPEN2011), TRANS TECH PUBLICATIONS LTD, 516 431 - +, 2012 - Nano-motion X-Y stage by pneumatic servo spherical bearing actuators
Atsushi Sugimoto; Tomoko Hirayama; Takashi Matsuoka; Katsumi Sasaki
Key Engineering Materials, 516 281 - 286, 2012 - Microstructural Evolution during Dry Wear Test in Magnesium and Mg-Y Alloy
Takashi Matsuoka; Hidetoshi Somekawa; Shunsuke Maeda; Tomoko Hirayama; Tadanobu Inoue; Toshiji Mukai
Materials Science and Engineering: A, 2012 - Development of ultraprecise positioning X-Y stage composed of pneumatic servo bearing actuators
A. Sugimoto; H. Danjo; T. Kitagawa; T. Hirayama; T. Matsuoka; K. Sasaki
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 225(7) 655 - 662, Jul. 2011 - Development of ultraprecise positioning X-Y stage composed of pneumatic servo bearing actuators
A. Sugimoto; H. Danjo; T. Kitagawa; T. Hirayama; T. Matsuoka; K. Sasaki
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 225(7) 655 - 662, Jul. 2011 - 1102 Structural Analysis of DLC Film under Hydrostatic High Pressure by Synchrotron X-ray Diffraction
HASHIMOTO Kazuhiro; Hirayama Tomoko; MATSUOKA Takashi; EGUCHI Yuri
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2011(86) "11 - 2", 19 Mar. 2011 - Fundamental Study on Oil Leakage from Tapered Seal at Ends of Fluid Film Bearing for Precision Equipments (Theoretical Study on Critical Rotational Speed for Oil Leakage):(Theoretical Study on Critical Rotational Speed for Oil Leakage)
HISHIDA Noriaki; HASHIMOTO Masaki; HIRAYAMA Tomoko; MATSUOKA Takashi; YABE Hiroshi
JEE, The Japan Society of Mechanical Engineers, 6(3) 627 - 638, 2011 - Fundamental Study on Oil Leakage from Tapered Seal at Ends of Fluid Film Bearing for Precision Equipments (Experimental Study on Oil Leakage from Tapered Seals):(Experimental Study on Oil Leakage from Tapered Seals)
HISHIDA Noriaki; HASHIMOTO Masaki; HIRAYAMA Tomoko; MATSUOKA Takashi; YABE Hiroshi
JEE, The Japan Society of Mechanical Engineers, 6(3) 639 - 649, 2011 - 1103 Clarification of Mechanism of Nano-Fluctuations of Obj ect Supported by Aerostatic Bearing with Surface restriction
YOSHIMUR.A Tomotaka; MINAMI Yosuke; HIRAYAMA Tomoko; MATSUOKA Takashi; YABE Hiroshi; KITAGAWA Takakazu
Tribology International, The Japan Society of Mechanical Engineers, 2011(86) "11 - 3", 2011 - Thickness and Density of Additive Adsorbed Layer on Metal Surface Measured by Neutron Reflectometry and Its Effect on Tribological Properties
HIRAYAMA Tomoko; TORII Takashi; KONISHI Yohei; MAEDA Masayuki; MATSUOKA Takashi; INOUE Kazuko; HINO Masahiro; YAMAZAKI Dai; TAKEDA Masayasu
TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, The Japan Society of Mechanical Engineers, 77(779) 2884 - 2893, 2011 - Deformation and Flying Height Orbit of Glass Sheets on Aerostatic Porous Bearing Guides
松岡 敬; Naoki Oiwa; Masaya Masuda; Tomoko Hirayama; Hiroshi Yabe
Tribology International, 2011 - Effect of Fiber Interval on Tensile Strength of Fiber Reinforced Plastics in Multi-Fiber Fragmentation Test
松岡 敬; A. Maki; A. Sakuratani; T. Hirayama
HPSM2011, 2011 - Fundamental Study on Oil Leakage from Tapered Seal at Ends of Fluid Film Bearing in Precision Equipments(Theoretical Study on Critical Rotational Speed for Oil Leakage)
Takashi Matsuoka; Noriaki Hishida; Masaki Hashimoto; Tomoko Hirayama; Hiroshi Yabe
Journal of Environment and Engineering, The Japan Society of Mechanical Engineers, 6(3) 627 - 638, 2011 - Fundamental Study on Oil Leakage from Tapered Seal at Ends of Fluid Film Bearing in Precision Equipments(Experimental Study on Oil Leakage from Tapered Seals)
Takashi Matsuoka; Noriaki Hishida; Masaki Hashimoto; Tomoko Hirayama; Hiroshi Yabe
Journal of Environment and Engineering, The Japan Society of Mechanical Engineers, 6(3) 639 - 649, 2011 - Clarifications of the Mechanism of Nano-Fluctuation of Aerostatic Thrust Bearing with Surface Restriction
Takashi Matsuoka; Tomotaka Yoshimura; Teruhisa Hanafusa; Takakazu Kitagawa; Tomoko Hirayama; Hiroshi Yabe
Tribology International, The Japan Society of Mechanical Engineers, 2011(86) "11 - 3", 2011 - Deformation and Flying Height Orbit of Glass Sheets on Aerostatic Porous Bearing Guides
Takashi Matsuoka; Naoki Oiwa; Masaya Masuda; Tomoko Hirayama; Hiroshi Yabe
Tribology International, 2011 - Effect of Fiber Interval on Tensile Strength of Fiber Reinforced Plastics in Multi-Fiber Fragmentation Test
T. Matsuoka; A. Maki; A. Sakuratani; T. Hirayama
HPSM2011, 2011 - 1104 Development of Ultraprecise Positioning XY Stage Using Pneumatic Servo Bearing Actuators
Danjo Hiroki; Sugimoto Atsushi; Hirayama Tomoko; MATSUOKA Takashi
The Machine Design and Tribology Division meeting in JSME, The Japan Society of Mechanical Engineers, 2010(10) 17 - 18, 18 Apr. 2010 - 1103 Structural Analysis of Metal-Lubricant Interface Using Neutron Reflectometry and Its Tribology Property
Torii Takashi; Suyama Yuki; Hirayama Tomoko; MATSUOKA Takashi
The Machine Design and Tribology Division meeting in JSME, The Japan Society of Mechanical Engineers, 2010(10) 15 - 16, 18 Apr. 2010 - 418 Ultraprecise Positioning X-Y-θ Stage Composed of Pneumatic Servo Bearing Actuator
Dabjo Hiroki; HIRAYAMA Tomoko; MATSUOKA Takashi; Sugimoto Atsushi; Yoshimura Tomotaka
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2010(85) "4 - 22", 16 Mar. 2010 - 415 Sideslip Force of 3K Type CVT
TANAKA Kiyotaka; MATUOKA Takashi; IZUNO Hiroyuki; HIRAYAMA Tomoko
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2010(85) "4 - 19", 16 Mar. 2010 - 417 Nanostructure Analysis of Lubricant Film at Solid-Liquid Interface by Neutron Reflectometry
TORII Takashi; HIRAYAMA Tomoko; MATSUOKA Takashi
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2010(85) "4 - 21", 16 Mar. 2010 - 416 Microscopic Structure Analysis of Traction oil Using Synchrotron X-ray Diffraction
KONO Koki; HIRAYAMA Tomoko; MATSUOKA Takashi; HASHIMOTO Kazuhiro; HOSONO Yuto
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2010(85) "4 - 20", 16 Mar. 2010 - 708 Flying Height and Deformation Behavior of Thin Glass Sheet for Liquid Crystal Display on Handling Device with Aerostatic Bearings
MASUDA Masaya; HIRAYAMA Tomoko; MATSUOKA Takashi
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2010(85) "7 - 8", 16 Mar. 2010 - Study on reduction of nano-fluctuations of aerostatic bearing with surface restriction
Takakazu Kitagawa; Tomoko Hirayama; Takashi Matsuoka; Ryota Mizuno; Masato Kadotani; Hiroki Danjo; Katsumi Sasaki; Hiroshi Yabe
INTERNATIONAL JOURNAL OF SURFACE SCIENCE AND ENGINEERING, INDERSCIENCE ENTERPRISES LTD, 4(2) 111 - 120, 2010 - Analysis and experimental study on oil leakage from fluid bearing
N. Hishida; T. Hirayama; M. Hashimoto; T. Matsuoka; H. Yabe
INTERNATIONAL JOURNAL OF SURFACE SCIENCE AND ENGINEERING, INDERSCIENCE ENTERPRISES LTD, 4(2) 121 - 137, 2010 - Study on reduction of nano-fluctuations of aerostatic bearing with surface restriction
Takakazu Kitagawa; Tomoko Hirayama; Takashi Matsuoka; Ryota Mizuno; Masato Kadotani; Hiroki Danjo; Katsumi Sasaki; Hiroshi Yabe
INTERNATIONAL JOURNAL OF SURFACE SCIENCE AND ENGINEERING, INDERSCIENCE ENTERPRISES LTD, 4(2) 111 - 120, 2010 - Analysis and experimental study on oil leakage from fluid bearing
N. Hishida; T. Hirayama; M. Hashimoto; T. Matsuoka; H. Yabe
INTERNATIONAL JOURNAL OF SURFACE SCIENCE AND ENGINEERING, INDERSCIENCE ENTERPRISES LTD, 4(2) 121 - 137, 2010 - Optimization of groove dimensions in herringbone-grooved journal bearings for improved repeatable run-out characteristics
Tomoko Hirayama; Naomi Yamaguchi; Shingo Sakai; Noriaki Hishida; Takashi Matsuoka; Hiroshi Yabe
TRIBOLOGY INTERNATIONAL, ELSEVIER SCI LTD, 42(5) 675 - 681, May 2009 - Optimization of groove dimensions in herringbone-grooved journal bearings for improved repeatable run-out characteristics
Tomoko Hirayama; Naomi Yamaguchi; Shingo Sakai; Noriaki Hishida; Takashi Matsuoka; Hiroshi Yabe
TRIBOLOGY INTERNATIONAL, ELSEVIER SCI LTD, 42(5) 675 - 681, May 2009 - 905 Development of Pneumatic Servo Bearing Actuator for Ultraprecise Positioning : Improvement of Performances by Feedback Controls
KADOTANI Masato; KATTO Satoshi; KITAGAWA Takakazu; HIRAYAMA Tomoko; MATSUOKA Takashi; SASAKI Katsumi
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2009(84) "9 - 5", 16 Mar. 2009 - 901 Run-Out Characteristics of Coupled Journal and Thrust Spiral-Grooved Bearings for Precision Equipment
ISOGAI Toshiaki; OKADA Kazuma; HIRAYAMA Tomoko; MATSUOKA Takashi
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2009(84) "9 - 1", 16 Mar. 2009 - 908 Development of Hydrodynamic Bearing Having Non-Uniform Groove for High-Speed Rotation
IKEDA Shinichi; Arakawa Yo; HIRAYAMA Tomoko; MATSUOKA Takashi; HISHIDA Noriaki; YABE Hiroshi
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2009(84) "9 - 8", 16 Mar. 2009 - 910 Study on Microscopic Structure of Machine Base Oils under High Pressure Using Synchrotron Radiation X-Ray Diffraction
HAYASE Susumu; HASHIMOTO Kazuhiro; HIRAYAMA Tomoko; MATSUOKA Takashi
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2009(84) "9 - 10", 16 Mar. 2009 - 906 Static and Dynamic Characteristics of Ultrasonic Wave Squeeze Bearing Guide and Their Theoretical Verification
NIHONGI Kei; HARADA Youichi; HIRAYAMA Tomoko; MATSUOKA Takashi
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2009(84) "9 - 6", 16 Mar. 2009 - 903 Study on Reduction of Nano-fluctuation of Aerostatic bearings
KITAGAWA Takakazu; KADOTANI Masato; DANJYO Hiroki; HIRAYAMA Tomoko; MATUOKA Takashi; YABE Hiroshi
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2009(84) "9 - 3", 16 Mar. 2009 - 323 Influence of Morphology of Dispersed Quasi-crystalline Phase in Mg-Zn-Y Alloys on Their Wear Property
SHIMODA Atsushi; MATSUOKA Takashi; HIRAYAMA Tomoko; SOMEKAWA Hidetoshi; MUKAI Toshiji
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2009(84) "3 - 23", 16 Mar. 2009 - 324 Study on Surface Modification of Polyimide Film by Plasma Treatment and Adhesion of Copper Plating to the Film
IKARI Shohei; MATSUOKA Takashi; HIRAYAMA Tomoko; KATO Kiyotaka
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2009(84) "3 - 24", 16 Mar. 2009 - Improvement of wear property of Mg-Zn-Y alloys by controlling morphology of dispersed quasi-crystalline phase
下田 篤; 松岡 敬; 平山 朋子
JCOM講演論文集, [日本材料学会], 38 253 - 256, 10 Mar. 2009 - Influence of plasma treatment on adhesion between copper plating and polyimide printed wiring board
井狩 頌平; 松岡 敬; 平山 朋子
JCOM講演論文集, [日本材料学会], 38 292 - 295, 10 Mar. 2009 - Machine Elements and Tribology Laboratory, Doshisha University
Takashi Matsuoka; Tomoko Hirayama
JOURNAL OF JAPANESE SOCIETY OF TRIBOLOGISTS, JAPAN SOC TRIBOLOGISTS, 54(8) 539 - 539, 2009, Others - 小型流体軸受における軸受端テーパシールからの油漏れに関する基礎研究
松岡 敬; 菱田典明; 橋本賢樹; 平山朋子; 松岡敬; 矢部寛
日本機械学会論文集C編, 75(758) 2783 - 2789, 2009 - 小型流体軸受における軸受端テーパシールからの油漏れに関する基礎研究
松岡 敬; 菱田典明; 橋本賢樹; 平山朋子; 松岡敬; 矢部寛
日本機械学会論文集C編, 75(758) 2790 - 2796, 2009 - Analysis and Experimental Study about Oil Leakage from Fluid Film Bearing
松岡 敬; Noriaki Hishida; Masaki Hashimoto; Tomoko Hirayama; Takashi Matsuoka; Hiroshi Yabe
2009 - Effects of Deposition Conditions on Adhesion of DLC Films Prepared by UBM Sputtering
NAKAMURA Morimasa; MIURA Ken'ichi; MATSUOKA Takashi; HIRAYAMA Tomoko; MORIWAKI Ichiro
JSMME, The Japan Society of Mechanical Engineers, 3(5) 748 - 757, 2009 - Structural analysis of simple base oils under high pressure using synchrotron radiation X-ray diffraction: First trial
Tomoko Hirayama; Kazuaki Nemoto; Susumu Hayase; Yuka Mitsunaga; Takashi Matsuoka; Takanori Hattori; Takumi Kikegawa
TRIBOLOGY INTERNATIONAL, ELSEVIER SCI LTD, 42(1) 88 - 92, Jan. 2009 - 小型流体軸受における軸受端テーパシールからの油漏れに関する基礎研究 (第1報：シール特性の理論解析)
松岡 敬; 菱田典明; 平山朋子; 橋本賢樹; 松岡敬; 矢部寛
日本機械学会論文集C編, 75(751) 727 - 734, 2009 - Analysis and Experimental Study about Oil Leakage from Fluid Film Bearing
International Journal of Surface Science and Engineering, 2009 - Effects of Deposition Conditions on Adhesion of DLC Films Prepared by UBM Sputtering
Journal of Solid Mechanics and Materials Engineering, 3(5) 748 - 757, 2009 - Structural analysis of simple base oils under high pressure using synchrotron radiation X-ray diffraction: First trial
Tomoko Hirayama; Kazuaki Nemoto; Susumu Hayase; Yuka Mitsunaga; Takashi Matsuoka; Takanori Hattori; Takumi Kikegawa
TRIBOLOGY INTERNATIONAL, ELSEVIER SCI LTD, 42(1) 88 - 92, Jan. 2009 - Improvement of copper plating adhesion of PPE printed wiring board by plasma treatment
Shohei Ikari; Hiroshi Kashiwade; Takashi Matsuoka; Tomoko Hirayama; Shuiti Ishida; Kiyotaka Kato
SURFACE & COATINGS TECHNOLOGY, ELSEVIER SCIENCE SA, 202(22-23) 5583 - 5585, Aug. 2008 - Improvement of copper plating adhesion of PPE printed wiring board by plasma treatment
Shohei Ikari; Hiroshi Kashiwade; Takashi Matsuoka; Tomoko Hirayama; Shuiti Ishida; Kiyotaka Kato
SURFACE & COATINGS TECHNOLOGY, ELSEVIER SCIENCE SA, 202(22-23) 5583 - 5585, Aug. 2008 - Effect of ethylene plasma polymerization on interfacial strength of ramie fiber reinforced PP
一原 祐介; 松岡 敬; 平山 朋子
JCOM講演論文集, [日本材料学会], 37 163 - 167, 18 Mar. 2008 - Effects of processing conditions of MoS2 fine particle bombarding on the tribological property of bombarded surface
森田 友和; 松岡 敬; 平山 朋子
JCOM講演論文集, [日本材料学会], 37 70 - 74, 18 Mar. 2008 - Study on microscopic structure & frictional properties of TiN/CrN multilayer films
楊 暁麗; 松岡 敬; 平山 朋子
JCOM講演論文集, [日本材料学会], 37 273 - 277, 18 Mar. 2008 - Tribological properties of rubber materials in reciprocating motion under gradually increased load and water lubrication
藤谷 淳治; 松岡 敬; 平山 朋子
JCOM講演論文集, [日本材料学会], 37 211 - 215, 18 Mar. 2008 - 921 Non-Repeatable Run-Out Characteristics of Spiral-Grooved Journal Bearings
SAKAMOTO kazuyuki; OOKA Maki; HIRAYAMA Tomoko; MATSUOKA Takashi
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2008(83) "9 - 21", 14 Mar. 2008 - 919 Tribological Properties of Rubber Materials in Reciprocating Motion under Gradually Increased Load and Water Lubrication
FUJITANI Junji; MATSUOKA Takashi; HIRAYAMA Tomoko; MASUDA Masaya
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2008(83) "9 - 19", 14 Mar. 2008 - 422 Effect of Histionic Constitution of Proteglycan on Frictional Property of Articular Cartilage Surface
KOSAKA Tetsuya; MATSUOKA Takashi; HIRAYAMA Tomoko; HUJIHARA Shusuke
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2008(83) "4 - 22", 14 Mar. 2008 - 2304 Structure Analysis of Interface between DLC Films and Lubricants using Neutron Reflectometry
HIRAYAMA Tomoko; TORII Takashi; MATSUOKA Takashi; INOUE Kazuko; EBISAWA Toru; TASAKI Seiji; HINO Masahiro; TORIKAI Naoya
The Proceedings of the Conference on Information, Intelligence and Precision Equipment : IIP, The Japan Society of Mechanical Engineers, 2008(0) 341 - 342, 2008 - Structure analysis of interface between DLC film and water by neutron reflectometry
平山 朋子; 宇野 共生; 松岡 敬
The Science and engineering review of Doshisha University, 同志社大学理工学研究所, 48(4) 52 - 58, Jan. 2008 - 関節軟骨表層の摩擦特性に及ぼすプロテオグリカンの組織構造の影響に関する研究
松岡 敬; 小坂哲也; 平山朋子; 松岡敬; 藤原秀輔
日本臨床バイオメカニクス学会誌, 29 93 - 98, 2008 - Improved Adhesion Properties of DLC Film Using Silicon-Carbide Fine Particle Bombardment
Yusuke Kawazoe; Morimasa Nakamura; Tomoko Hirayama; Takashi Matsuoka; Yasuhiro Miki
JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, JAPAN SOC MECHANICAL ENGINEERS, 2(6) 961 - 970, 2008 - UBMスパッタ法により形成したDLC膜の残留応力に及ぼす被覆条件の影響
松岡 敬; 中村守正; 三浦健一; 松岡敬; 平山朋子
材料, 57(5) 488 - 494, 2008 - 3K形CVTによる力平衡装置の開発
松岡 敬; 岡村貴句男; 知元洋平; 松岡敬; 平山朋子
設計工学, 43(7) 382 - 387, 2008 - 超精密位置決め用空気圧サーボ軸受アクチュエータにおける微小振れに関する研究
松岡 敬; 北川貴一; 平山朋子; 松岡敬; 角谷雅人; 檀上弥輝; 佐々木勝美; 矢部寛
同志社大学理工学研究報告, 48(4) 234 - 240, 2008 - 2K-H形CVTの伝達性能に及ぼすスピンの影響
松岡 敬; 岡村貴句男; 田中佳和; 松岡敬; 平山朋子
設計工学, 43(3) 157 - 162, 2008 - Improved Adhesion Properties of DLC Film Using Silicon-Carbide Fine Particle Bombardment
Yusuke Kawazoe; Morimasa Nakamura; Tomoko Hirayama; Takashi Matsuoka; Yasuhiro Miki
JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, JAPAN SOC MECHANICAL ENGINEERS, 2(6) 961 - 970, 2008 - Density of lubricants at a solid-liquid interface measured by neutron reflectometry (Part 1): The case of DLC films having various surface energies and water
Tomoko Hirayama; Tomoki Uno; Tomoki Uno; Tomoki Uno; Takashi Matsuoka; Kazuko Inoue; Toru Ebisawa; Seiji Tasaki; Masahiro Hino; Naoya Torikai
Japanese Journal of Tribology, 52 685 - 696, 01 Dec. 2007 - 114 Residual Stress and Adhesion of Diamond-like Carbon Films Deposited by UBM Sputtering
NAKAMURA Morimasa; MIURA Ken'ichi; MATSUOKA Takashi; HIRAYAMA Tomoko; MORIWAKI Ichiro
The JSME Symposium on Motion and Power Transmissions, The Japan Society of Mechanical Engineers, 2007 73 - 76, 29 Nov. 2007 - B212 Study on condition of neck-shoulder stiffness and evaluation of massage effectiveness
HAYASHI Jun-ichi; MATSUOKA Takashi; HIRAYAMA Tomoko
Proceedings of the ... JSME Conference on Frontiers in Bioengineering, The Japan Society of Mechanical Engineers, 2007(18) 135 - 136, 05 Oct. 2007 - 1216 Study on Reduction of Nano-Fluctuation of Aerostatic Bearing with Surface-Restriction
KITAGAWA Takakazu; MIZUNO Ryota; KADOTANI Masato; MATUOKA Takashi; HIRAYAMA Tomoko; SASAKI Katsumi
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2007(82) "12 - 14", 16 Mar. 2007 - 308 Influence on Copper Plating Adhesion by Plasma Modification of PPE Printed Wiring Board
膳 寛; 松岡 敬; 平山 朋子; 石田 修一; 加藤 聖隆
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2007(82) "3 - 8", 16 Mar. 2007 - Study on surface modification and copper plating adhesion of PPE printed wiring board treated by plasma treatment
膳 寛; 松岡 敬; 平山 朋子
JCOM講演論文集, [日本材料学会], 36 260 - 264, 08 Mar. 2007 - 615 The Effect of Protein Degeneration in Lubrication Liquid to Tribology of Prosthetic Joint Materials
TSUKAMOTO Atsushi; MORITA Yusuke; MATSUOKA Takashi; HIRAYAMA Tomoko
バイオエンジニアリング講演会講演論文集, The Japan Society of Mechanical Engineers, 2006(19) 224 - 225, 06 Jan. 2007 - 中性子反射率法による金属-金属界面および親水性・撥水性薄膜表面の観察 (第41回京都大学原子炉実験所学術講演会 報文集)
宇野 共生; 平山 朋子; 松岡 敬
京都大学原子炉実験所学術講演会報文集, 京都大学原子炉実験所, 41 104 - 109, Jan. 2007 - 422 Finite Element Stress Analyses of the Intervertebral Disc in a Rheumatoid Arthritis Patient with the Cervical Involvement
鈴木 啓水; 高取 良太; 徳永 大作; 長谷 斉; 松岡 敬; 平山 朋子; 郷木 理史; 久保 俊一; 井上 望
学術講演会講演論文集, 日本材料学会, 56 303 - 304, 2007 - 3K形トラクションドライブCVTのストール特性に関する研究
松岡 敬; 岡村貴句男; 知元洋平; 松岡敬; 平山朋子
日本機械学会論文集C編, 73(729) 1574 - 1581, 2007 - Suggestion of Evaluation method for Adhesion of DLC Films Using Scratch Test and 180 Degree Bend Test
NAKAMURA Morimasa; MIURA Ken-ichi; MATSUOKA Takashi; HIRAYAMA Tomoko
journal of the Japan Society for Testing Materials, The Society of Materials Science, Japan, 56(7) 667 - 674, 2007 - Suggestion of Evaluation method for Adhesion of DLC Films Using Scratch Test and 180 Degree Bend Test
NAKAMURA Morimasa; MIURA Ken-ichi; MATSUOKA Takashi; HIRAYAMA Tomoko
journal of the Japan Society for Testing Materials, The Society of Materials Science, Japan, 56(7) 667 - 674, 2007 - RFプラズマCVD法を用いてPPS上に形成したDLC膜の機械的特性
松岡 敬; 本多統; 中村守正; 松岡敬; 平山朋子
同志社大学理工学研究報告, 48(3) 127 - 133, 2007 - 中性子反射率法による物質最表面近傍における潤滑剤の密度測定
松岡 敬; 平山朋子; 宇野共生; 松岡敬; 井上和子; 海老澤徹; 田崎誠司; 日野正裕; 鳥飼直也
トライボロジスト, 52(12) 896 - 903, 2007 - Frequency Analysis of Hard Disk Drive Spindle System Supported by Hydrodynamic Bearings
Shohta Tohma; Toshiaki Isogai; Tomoko Hirayama; Takashi Matsuoka; Katsuhisa Yokozuka; Shigeyoshi Mori
JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, JAPAN SOC MECHANICAL ENGINEERS, 1(5) 717 - 725, 2007 - Frequency Analysis of Hard Disk Drive Spindle System Supported by Hydrodynamic Bearings
Shohta Tohma; Toshiaki Isogai; Tomoko Hirayama; Takashi Matsuoka; Katsuhisa Yokozuka; Shigeyoshi Mori
JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, JAPAN SOC MECHANICAL ENGINEERS, 1(5) 717 - 725, 2007 - B205 Finite Element Stress Analyses of the Intervertebral Disc of the Rheumatoid Cervical Spine
SUZUKI Hiromi; INOUE Nozomu; TAKATORI Ryota; TOKUNAGA Daisaku; HASE Hitoshi; MATSUOKA Takashi; HIRAYAMA Tomoko; KUBO Toshikazu
Proceedings of the ... JSME Conference on Frontiers in Bioengineering, The Japan Society of Mechanical Engineers, 2006(17) 121 - 122, 10 Nov. 2006 - 1405 Study on Traction Characteristic used Elastoplasticity Shearing Model under EHL Condition
NAKAHIRA Masahiro; MATSUOKA Takashi; HIRAYAMA Tomoko; MURAKI Masayoshi
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2006(81) "14 - 5", 17 Mar. 2006 - 1010 Development of Estimation Method of Mechanical Environments in vivo Using 3D Computer Model in Motion
SUZUKI Hiromi; INOUE Nozomu; MATSUOKA Takashi; HIRAYAMA Tomoko; An Howard
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2006(81) "10 - 10", 17 Mar. 2006 - 424 In vivo Evaluation of Mechanical Environments of Intervertebral Disc Using 3D Computer Model
SUZUKI Hiromi; INOUE Nozomu; MATSUOKA Takashi; HIRAYAMA Tomoko; An Howard
学術講演会講演論文集, 日本材料学会, 55 323 - 324, 2006 - 平織ガラス繊維強化複合材料の機械的特性に及ぼすポストキュア時間の影響
松岡 敬; 太田孝雄; 松岡敬; 坂口一彦
材料, 55(10) 958 - 964, 2006 - プリント基板製造におけるドライプロセス化を目指したCuダイレクトレーザ加工によるバイヤホール形成
松岡 敬; 廣垣俊樹; 青山栄一; 松岡敬; 土井信幸; 松谷章吾; 小川圭二
同志社大学理工学研究報告, 47(2) 60 - 65, 2006 - 織物強化複合材料の損傷進展に及ぼす繊維束形状の影響
松岡 敬; 太田孝雄; 吉住光; 土橋広和; 松岡敬; 坂口一彦
材料, 55(2) 224 - 229, 2006 - Study on Interfacial Strength Properties between PBO Fiber Modified by Oxygen Plasma Treatment and Epoxy Resin
NAKAMURA Tomo; MATSUOKA Takashi; SAKAGUCHI Kazuhiko
Journal of the Society of Materials Science, Japan, The Society of Materials Science, Japan, 55(1) 83 - 88, 2006 - Mechanical properties of loosing natural fiber reinforced polypropylene
K. Mizuta; Y. Ichihara; T. Matsuoka; T. Hirayama; H. Fujita
HIGH PERFORMANCE STRUCTURES AND MATERIALS III, WIT PRESS/COMPUTATIONAL MECHANICS PUBLICATIONS, 85 189 - +, 2006 - 2K-H形CVTの伝達性能に関する研究
松岡 敬; 吉田武史; 岡村貴句男; 松岡敬; 坂口一彦
日本機械学会論文集C編, 72(718) 1960 - 1966, 2006 - Mechanical properties of loosing natural fiber reinforced polypropylene
K. Mizuta; Y. Ichihara; T. Matsuoka; T. Hirayama; H. Fujita
HIGH PERFORMANCE STRUCTURES AND MATERIALS III, WIT PRESS/COMPUTATIONAL MECHANICS PUBLICATIONS, 85 189 - +, 2006 - 2P1-12 Effect of Material Properties of Massage Chair Arm on Massage Comfort
KOTANI Naoki; MATSUOKA Takashi; HIRAYAMA Tomoko; KONDO Hideshi
The JSME Symposium on Welfare Engineering, The Japan Society of Mechanical Engineers, 2005 191 - 194, 07 Dec. 2005 - Influence of spin on efficiency of 2K-H type traction drive CVT
松岡 敬
Proc. of the 1st International Conference on Design Engineering and Science, (1) 127 - 132, 2005 - Study on slip ratio and stall torque for 3K type Traction drive CVT
CHIMOTO Y.
1^ICDES2005, Austria, (1) 121 - 126, 2005 - Study on Application of Massage Chair Arm Using CFRP and Evaluation of Massage Comfort(
The Frontier of Applications for Composite Materials)
NAKAMURA Morimasa; KOTANI Naoki; MATSUOKA Takashi; SAKAGUUHI Kazuhiko; KONDO Hideshi
Journal of the Society of Materials Science, Japan, The Society of Materials Science, Japan, 54(5) 500 - 506, 2005 - Mechanical Properties on Natural Fiber Reinforced Composite Materials with Using Loosing Technique
松岡 敬
Proc. of Third International Workshop on Green Composites, 95 - 100, 2005 - AZ91合金のトライボロジー特性に及ぼす析出組織の影響
松岡 敬
材料, 54(1) 90 - 96, 2005 - Influence of spin on efficiency of 2K-H type traction drive CVT
Proc. of the 1st International Conference on Design Engineering and Science, (1) 127 - 132, 2005 - Study on slip ratio and stall torque for 3K type traction drive CVT
Proc. of the 1st International Conference on Design Engineering and Science, (1) 121 - 126, 2005 - Mechanical Properties on Natural Fiber Reinforced Composite Materials with Using Loosing Technique
95 - 100, 2005 - Effect of surface treatment on interfacial strength between bamboo fiber and PP resin
NH Tung; H Yamamoto; T Matsuoka; T Fujii
JSME INTERNATIONAL JOURNAL SERIES A-SOLID MECHANICS AND MATERIAL ENGINEERING, JAPAN SOC MECHANICAL ENGINEERS, 47(4) 561 - 565, Oct. 2004 - Effect of surface treatment on interfacial strength between bamboo fiber and PP resin
NH Tung; H Yamamoto; T Matsuoka; T Fujii
JSME INTERNATIONAL JOURNAL SERIES A-SOLID MECHANICS AND MATERIAL ENGINEERING, JAPAN SOC MECHANICAL ENGINEERS, 47(4) 561 - 565, Oct. 2004 - 203 Influence of Fine Particle Peening for Characteristics in Fatigue Life of Ball Way.
UDA Masashi; MATUOKA Takashi; SAKAGUCHI Kazuhiko; MURATA Mituo; MURAKAMI Takahiro
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2004(79) "2 - 5"-"2-6", 17 Mar. 2004 - Method for cleaning laser-drilled holes on printed wiring boards by plasma treatment
T Hirogaki; E Aoyama; R Minagi; K Ogawa; T Katayama; T Matsuoka; H Inoue
JSME INTERNATIONAL JOURNAL SERIES C-MECHANICAL SYSTEMS MACHINE ELEMENTS AND MANUFACTURING, JAPAN SOC MECHANICAL ENGINEERS, 47(1) 105 - 110, Mar. 2004 - Method for cleaning laser-drilled holes on printed wiring boards by plasma treatment
T Hirogaki; E Aoyama; R Minagi; K Ogawa; T Katayama; T Matsuoka; H Inoue
JSME INTERNATIONAL JOURNAL SERIES C-MECHANICAL SYSTEMS MACHINE ELEMENTS AND MANUFACTURING, JAPAN SOC MECHANICAL ENGINEERS, 47(1) 105 - 110, Mar. 2004 - Study on Interfacial Strength Properties between Epoxy Resin and PBO Fiber Modified by Low-Temperature Plasma Treatment
UMAKOSHI Tomoyasu; MATSUOKA Takashi; SAKAGUCHI Kazuhiko
Transactions of the Japan Society of Mechanical Engineers Series B, The Japan Society of Mechanical Engineers, 70(699) 1643 - 1649, 2004 - 相関法による滑り状態下におけるゴム摩擦面の変形分布の計測
松岡 敬
日本機会学会論文集（C編）, 70(696) 2500 - 2507, 2004 - 解繊技術を利用した綿繊維強化 ポリプロピレン/ポリエチレン樹脂複合材料の開発
松岡 敬
材料, 53(5) 539 - 545, 2004 - ゴムの摩擦表面形状とフラクタル
松岡 敬
日本ゴム協会誌, 77(2) 60 - 64, 2004 - Adhesion Improvement of Copper Plating on PPO Resin for Printed Wiring Boards Material using Low Temperature Plasma Treatment
ISHIDA Shuichi; MATSUOKA Takashi; SAKAGUCHI kazuhiko
Transactions of the Japan Society of Mechanical Engineers Series B, The Japan Society of Mechanical Engineers, 70(689) 155 - 161, 2004 - A Study on Friction and Wear Properties of Polycarbonate of Ion-Implanted
SAKAUE Takeshi; SAKAGUTI Kazuhiko; MATUOKA Takashi
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2003(78) "4 - 21"-"4-22", 2003 - Fatigue and Impact Strengths of Austenitic Stainless Steel by Powder Injection Molding
Hideki Kyogoku; Shinichiro Komatsu; Masahiro Shinzawa; Takashi Matsuoka
Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, Funtai Funamtsu Yakin Kyokai/Japan Soc. of Powder Metallurgy, 50(11) 903 - 907, 2003 - Friction and Wear Properties of Solution-Treated and Aging-Treated Mg-Al-Zn Alloys
YOSHIOKA Ryo; MATSUOKA Takashi; SAKAGUCHI Kazuhiko; MUKAI Toshiji; MURATA Akihiro
Journal of the Society of Materials Science, Japan, The Society of Materials Science, Japan, 58(6) 702 - 708, 2003 - ニューラルネットワークによる織物風合いの予測―織物構造からの風合いの予測―
松岡 敬
繊維機械学会誌（論文集）, (56) 53 , 2003 - Fatigue and Impact Strengths of Austenitic Stainless Steel by Powder Injection Molding
Hideki Kyogoku; Shinichiro Komatsu; Masahiro Shinzawa; Takashi Matsuoka
Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, Funtai Funamtsu Yakin Kyokai/Japan Soc. of Powder Metallurgy, 50(11) 903 - 907, 2003 - 直動案内要素の疲れ寿命特性に及ぼすレイデント処理の効果
松岡 敬
日本機械学会論文集（C編）, 68(676) 3720 , 2002 - 往復滑り状態下のゴムの摩擦面形状の周波数解析と摩擦特性の関連性
松岡 敬
日本機械学会論文集（C編）, 68(675) 3416 , 2002 - 振動解析による高分子系繊維強化複合材料の損傷評価（振動特性変化からのアプローチ）
松岡 敬
日本機械学会論文集（A編）, 68(674) 1446 , 2002 - ZK60マグネシウム合金の摩擦摩耗特性に及ぼす結晶粒径の影響
松岡 敬
材料, 51(10) 1154 , 2002 - 酸素プラズマ処理によるGF/PP複合材料の表面改質と接着特性に関する研究
松岡 敬
材料, 51(9) 1038 , 2002 - Study on Tribological Properties of Pitch Carbon Fiber Reinforced PPS Composite Materials under the Rolling-Sliding Condition(Special Issue on Composite Materials)
TAKAYA Kentaro; MATSUOKA Takashi; SAKAGUCHI Kazuhiko; OKUDA Kenji
Journal of the Society of Materials Science, Japan, The Society of Materials Science, Japan, 51(5) 524 - 530, 2002 - 解繊繊維強化複合材料の成形技術開発に関する研究
松岡 敬
強化プラスチックス, 強化プラスチックス協会, 48(4) 161 - 167, 2002 - Damage Detection of Fiber Reinforced Plastics Using the Change of Vibration Properties
松岡 敬
Proc. of 9th International Conference on Fiber Reinforced Composites, 280, 2002 - Study on the interfacial shear strength of bamboo fiber reinforced plastics
O Sano; T Matsuoka; K Sakaguchi; K Karukaya
HIGH PERFORMANCE STRUCTURES AND COMPOSITES, WIT PRESS, 4 147 - 156, 2002 - Damage Detection of Fiber Reinforced Plastics Using the Change of Vibration Properties
Proc. of 9th International Conference on Fiber Reinforced Composites, 280, 2002 - Study on the interfacial shear strength of bamboo fiber reinforced plastics
O Sano; T Matsuoka; K Sakaguchi; K Karukaya
HIGH PERFORMANCE STRUCTURES AND COMPOSITES, WIT PRESS, 4 147 - 156, 2002 - 809 Surface Modification of PPS by Ion Implantation Method : Surface Properties and Friction and Wear Properties
SATO Hidetaka; SAKAGUCHI Kazuhiko; MATSUOKA Takashi
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2001(76) "8 - 17"-"8-18", 16 Mar. 2001 - 811 Effect of Wear Surface of Rubber for Friction Force under the Reciprocating Sliding Condition
KURIYA Akihiko; SAKAGUTI Kazuhiko; MATSUOKA Takashi; FUJITA Hiroyuki; HAGIMOTO Mituhiro
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2001(76) "8 - 21"-"8-22", 16 Mar. 2001 - 807 Study on the Improvement of Friction and Wear Characteristic by DLC film formed by the Plasma Polymerization Method
FUKUI Takao; MATUOKA Takashi; SAKAGUCHI Kazuhiko; YAMAHARA Noboru
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2001(76) "8 - 13"-"8-14", 16 Mar. 2001 - Friction and Wear Properties of Vinylester Composites Containing Short Carbon Fiber Fillers : Influence of Hot Water Degradation
KAGIMOTO Koki; MATSUOKA Takashi; SAKAGUCHI Kazuhiko; MATSUOKA Yoshiaki; FUJITA Hiroyuki
Transactions of the Japan Society of Mechanical Engineers. Series C., The Japan Society of Mechanical Engineers, 67(664) 3992 - 3998, 2001 - 往復滑り状態下のゴムの摩擦面形状の定量化と摩擦特性との関連性（第2報）-３次元表面形状からの特徴量の抽出-
松岡 敬
トライボロジスト, 46(5) 418 , 2001 - Effect of Wavy Fibers on Mechanical Properties of plain Woven textile composites
松岡 敬
Materials Science Research International, (Special Technical Publication-2) 286 , 2001 - AFRPの界面強度に及ぼす酸素プラズマ処理の影響
松岡 敬
材料, 50(2) 174 , 2001 - Effect of Wavy Fibers on Mechanical Properties of plain Woven textile composites
Materials Science Research International, (Special Technical Publication-2) 286 , 2001 - 1010 Fatigue strength of SUS304L by metal injection molding
MIZUNO Daisuke; SAKAGUCHI Kazuhiko; MATSUOKA Takashi; KYOGOKU Hideki
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2000(75) "10 - 29"-"10-30", 16 Mar. 2000 - 413 Study of improving wear resistance on magnesium alloy composite
MATSUYAMA Masakazu; SAKAGUTI Kazuhiko; MATSUOKA Takashi; MUKAI Toshiji
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2000(75) "4 - 19"-"4-20", 16 Mar. 2000 - 403 Influence of interface friction as lamination on dynamic properties
SAKO Noriya; SKAGUCHI Kazuhiko; MATSUOKA Takashi
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2000(75) "4 - 9"-"4-10", 16 Mar. 2000 - 416 The effect of crowning treatment on the life of Ball Way
YOSHIMURA Yugo; SAKAGUCHI Kazuhiko; MATSUOKA Takashi; MURAKAMI Takahiro; HORIMOTO Hidemi
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2000(75) "4 - 25"-"4-26", 16 Mar. 2000 - 219 温水劣化を伴ったカーボン繊維粉末充填ビニルエステル系複合材料の摩擦・摩耗特性
松岡 敬; 坂口 一彦; 松岡 良明; 鍵元 皇樹
学術講演会講演論文集, 日本材料学会, 49 227 - 228, 2000 - Effect of Fiber Surface Treatment on Strength Properties of Bio-degradable Composites Using Jute Fibers
JIANG Jianye; FUJII Toru; OKUBO Kazuya; MATSUOKA Takashi
日本複合材料学会研究発表講演会予稿集, 2000 7 - 8, 2000 - 転がり滑り状態下における炭素繊維強化PPS複合材料のトライボロジー特性および疲れに関する研究
松岡 敬
トライボロジスト, 45(10) 749 , 2000 - 往復滑り状態下のゴムの摩擦面形状の定量化と摩擦特性との関連性
松岡 敬
トライボロジスト, 45(4) 312 , 2000 - カーボン繊維粉末充填ビニルエステル系複合材料のトライボロジー特性と硬さとの関係
松岡 敬
日本機械学会論文集（Ｃ編）, 66(643) 986 , 2000 - 布の摩擦係数波形のフラクタル解析
松岡 敬
日本繊維機会学会, 53(2) 37 , 2000 - Relation between the quantitative evaluation of the surface texture of rubber under the reciprocating sliding condition and the frictional characteristic - Extraction of features from the digital images
H Fujita; K Morikawa; K Sakaguchi; T Matsuoka
JOURNAL OF JAPANESE SOCIETY OF TRIBOLOGISTS, JAPAN SOC TRIBOLOGISTS, 45(4) 312 - 320, 2000 - Relation between Tribological Properties and Hardness on Vinylester Composites Containing Short Carbon Fiber Filler
Takaya Okada; Kazuhiko Sakaguchi; Takashi Matsuoka; Yoshiaki Matsuoka
Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 66(643) 986 - 993, 2000 - Fractal analysis of wavy pattern of frictional coefficient of fabrics
Hiroyuki Fujita; Kazuhiko Komurasaki; Takashi Matsuoka; Kazuhiko Sakaguchi
Seni Kikai Gakkai Shi/Journal of the Textile Machinery Society of Japan, Textile Machinery Soc of Japan, 53(2) T27 - T36, 2000 - みがき銅板に対するビニルエステル系複合材料のすべり摩擦・摩耗特性
松岡 敬
日本機械学会論文集（Ｃ編）, 65(634) 368 , 1999 - 熱可塑性複合材料における界面応力伝達・ﾏﾄﾘｯｸｽ応力集中に関するパラメーターの推定
松岡 敬
日本機械学会論文集（Ａ編）, 65(633) 48 , 1999 - フリクションドライブのスピン・スキューに関する研究
松岡 敬
トライボロシスト, 44(4) 273 , 1999 - Sliding Friction and Wear Properties of Vinylester Composite Materials against steel
65(634) 368 , 1999 - Estimation of Evaluating Parameters on stress Transferability in Interface and Stress Concentration in Matrix of Thermoplastic Composites Material
65(633) 48 , 1999 - A study of spin and skew on friction drive
M Matsudaira; K Sikaguchi; T Matsuoka
JOURNAL OF JAPANESE SOCIETY OF TRIBOLOGISTS, JAPAN SOC TRIBOLOGISTS, 44(4) 273 - 280, 1999 - Study on Rolling Contact Fatigue Life of Ball Way
UENO Masanori; SAKAGUCHI Kazuhiko; MATSUOKA Takashi; TONOKAI Mitsuyasu; HORIMOTO Hidemi
Transactions of the Japan Society of Mechanical Engineers. Series C., The Japan Society of Mechanical Engineers, 64(628) 313 - 4849, 1998 - Sliding Friction and Wear Properties of Vinylester Composite Materials Against The Steel
松岡 敬
Proc. of ACCM-1, 615-1, 1998 - Deformation and Strength of Glass Fiber Reinforced Polypropylene in Interface Modification using Plasma Treatment Method
松岡 敬
Proceeding of the 7th International Conference on FRC, (1) 175 , 1998 - Interfacial Control of Glass/Polypropylene Composites Using Low Temperature Plasma Treatment : Estimation of Interfacial Strength Using T-Peel Test Method
SAKO Noriya; MATSUOKA Takashi; SAKAGUCHI Kazuhiko
Transactions of the Japan Society of Mechanical Engineers Series B, The Japan Society of Mechanical Engineers, 64(618) 500 - 507, 1998 - Study on Rolling Contact Fatigue Life of Ball Way
UENO Masanori; SAKAGUCHI Kazuhiko; MATSUOKA Takashi; TONOKAI Mitsuyasu; HORIMOTO Hidemi
Transactions of the Japan Society of Mechanical Engineers. Series C., The Japan Society of Mechanical Engineers, 64(628) 313 - 4849, 1998 - Sliding Friction and Wear Properties of Vinylester Composite Materials Against The Steel
Proc. of ACCM-1, 615-1, 1998 - Deformation and Strength of Glass Fiber Reinforced Polypropylene in Interface Modification using Plasma Treatment Method
Proceeding of the 7th International Conference on FRC, (1) 175 , 1998 - The effect of interface on fracture mechanism of GF/PP composites using O2 plasma treatment
Noriya Sako; Takashi Matsuoka; Kazuhiko Sakaguch
Composite Interfaces, 4(6) 401 - 415, 01 Jan. 1997 - The effect of interface on fracture mechanism of GF/PP composites using O2 plasma treatment
Noriya Sako; Takashi Matsuoka; Kazuhiko Sakaguch
Composite Interfaces, 4(6) 401 - 415, 01 Jan. 1997 - Fundamental study on fiber-reinforced epoxy composites using glass fabric treated by low-temperature ammonia plasma
T Ihara; T Matsuoka; Y Iriyama
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, VSP BV, 10(9) 823 - 832, 1996 - Effects of Matrix on Fatigue Crack Propagation Behaviors and Crack Length Distribution of Spheroidal Graphite Cast Iron
MATSUOKA Takashi; SHIOTA Toshio; KOMATSU Shinichiro
THE JOURNAL OF THE JAPAN FOUNDRYMEN'S SOCIETY, Japan Foundry Engineering Society, 68(6) 512 - 517, 1996 - AMMONIA PLASMA TREATMENT OF GLASS FIBER FOR CONTROLLED INTERFACIAL ADHESION TO EPOXY RESIU
松岡 敬
Proc : of ECCM-7, 7(2) 429 , 1996 - ポリイミドの摩擦伝動における変速操作力に関する研究
松岡 敬
トライボロジスト, 41(5) 411 , 1996 - 低温プラズマを利用したGFRPの曲げ強さに及ぼす磁場の影響
松岡 敬
日本機械学会論文集(A編), 62(602) 2256 , 1996 - Fundamental study on fiber-reinforced epoxy composites using glass fabric treated by low-temperatare ammonia plama.
J. Adhesion Sci. Technol., 10(9) 823 , 1996 - Effects of Matrix on Fatigue Crack Propagation Behaviors and Crack Length Distribution of Spheroidal Graphite Cast From.
Journal of Japan Foundry Engineering Society., 68(6) 512 , 1996 - AMMONIA PLASMA TREATMENT OF GLASS FIBER FOR CONTROLLED INTERFACIAL ADHESION TO EPOXY RESIU
Proc : of ECCM-7, 7(2) 429 , 1996 - The study of speed change force in the friction drive of polyimide
T Okamoto; K Sakaguchi; T Matsuoka
JOURNAL OF JAPANESE SOCIETY OF TRIBOLOGISTS, JAPAN SOC TRIBOLOGISTS, 41(5) 411 - 418, 1996 - Effect of Magnetie Field on Bending Strength of GFRP Prepared with Low-Temperature Plasma
Transactions of the Japan Society of Mecharical Engineers, 62(602) 2256 , 1996 - Properties of Rolling-Sliding Friction on Carbon-Fiber-Reinforced Polyphenylene Sulfide (PPS) Composites
SAKAGUCHI Kazuhiko; MATSUOKA Takashi; ARAKI Hiroaki; ADACHI Tsuneyuki
Transactions of the Japan Society of Mechanical Engineers. Series C., The Japan Society of Mechanical Engineers, 61(583) 1117 - 1122, 1995 - フェライト地鋳鉄の疲労亀裂進展挙動に及ぼす黒鉛形状の影響
松岡 敬
鋳物, 67(3) 197 , 1995 - Properties of Rolling Sliding Friction on Carbon-Fiber-Reinforced Polyphenylene Sulfide (PPS) Composites
SAKAGUCHI Kazuhiko; MATSUOKA Takashi; ARAKI Hiroaki; ADACHI Tsuneyuki
Transactions of the Japan Society of Mechanical Engineers, The Japan Society of Mechanical Engineers, 61(583) 1117 - 1122, 1995 - Influence of graphite Shape on Fatigue Crack Propagation Behavior of Ferritized Cast Iron
The journal of the Japan foundrymen's Society, 67(3) 197 , 1995 - 球状黒鉛鋳鉄の各種負荷条件による破面の特徴
松岡 敬
鋳物, 日本鋳造工学会, 66(8) 579 - 586, 1994 - Effects of Several Main Factors on Ductile-Brittle Transition Behaviors of Fracture Toughness in SG Cast Iron
松岡 敬
AFS Transactions, 1994 - Fractographical Characteristics of Spheroidal Graphite Cast Irons Fractured Under Various Applied Loads
The Journal of the Japan Foundrymen's Society, 66(8) 579 , 1994 - Effects of Several Main Factors on Ductile-Brittle Transition Behaviors of Fracture Toughness in SG Cast Iron
AFS Transactions, 1994 - Influence of Manganese Content On Fracture Toughness In Ductile Cast Iron
松岡 敬
Strength of Ductile Cast Iron and Other Cast Metals'93 JSME-MMD, 431, 1993 - Influences of Carbon, Silicon, Manganese and Phosphorus Contents On the compact Characteristics of Spheroidal Graphite Cast Iron
松岡 敬
Strength of Ductile Cast Iron and Other Cast Metals '93 JSME-MMD, 413, 1993 - 球状黒鉛鋳鉄の衝撃特性に及ぼす炭素量の影響
松岡 敬
鋳物, 65(10) 771 , 1993 - Fundamental Study on FRP Using Glass Fiber Treated By Low Temperature Plasma
松岡 敬
Proc. of ISPCII, (3) 1162 , 1993 - ガラス繊維の表面処理に低温プラズマ処理を利用したFRPの基礎的研究
松岡 敬
材料, 42(478) 829 - 835, 1993 - Fatigue Damage Process of Spheroidal Graphite Cast Iron Under Rotating Bending Cyclic Loading.
Matsuoka Takashi; Shiota Toshio; Komatsu Shinichiro
Transactions of the Japan Society of Mechanical Engineers Series B, The Japan Society of Mechanical Engineers, 59(559) 722 - 727, 1993 - Influence of Manganese Content On Fracture Toughness In Ductile Cast Iron
Strength of Ductile Cast Iron and Other Cast Metals'93 JSME-MMD, 431, 1993 - Influences of Carbon, Silicon, Manganese and Phosphorus Contents On the compact Characteristics of Spheroidal Graphite Cast Iron
Strength of Ductile Cast Iron and Other Cast Metals '93 JSME-MMD, 413, 1993 - Influence of Carbon Content on the Impact Characteristics of Spheroidal Graphite Cast Iron
The gournal of the Japan Foundrymen's Society, 65(10) 771 , 1993 - Fundamental Study on FRP Using Glass Fiber Treated By Low Temperature Plasma
Proc. of ISPCII, (3) 1162 , 1993 - Fundamental Study on FRP Using Glass Fiber Treated by Low Temperature Plasma
Journal of Society of Materials Science, 42(478) 829 - 835, 1993 - Fatigue Damage Process of Spheroidal Graphite Cast Iron Under Botating Bending Cyclic Loading
Transactions of the Japan Society of Mechanical Engineers., 59(559) 722 , 1993 - 球状黒鉛鋳鉄の衝撃特性に及ぼすマンガン量の影響
松岡 敬
鋳物, 63(7), 1991 - Fatigue Damage of Plain Woven GFRP under Pulse Loading
松岡 敬
Proc. of Fatique 90, vol 2, 1990 - Influences of graphite nodules on fatigue crack propagation behaviors and crack length distribution of spheroidal graphite cast iron.
MATSUOKA Takashi; SHIOTA Toshio; KOMATSU Shinichiro
Transactions of the Japan Society of Mechanical Engineers Series B, The Japan Society of Mechanical Engineers, 56(526) 1371 - 1377, 1990 - Fatigue Damage of Plain Woven GFRP under Pulse Loading
Proc. of Fatique 90, vol 2, 1990 - Fracture Toughness and Fatigue Crack Propagation Behavior of FRP
松岡 敬
Proc. of ICCM7 Vol. 2, 1989 - On the Strength and Stress-Strain Relasions of Plain Woven Fiber Reinforced Plastics Under Tension-torsion Biaxial Loading(
Minor Special Issue on Fiber Reinforced Plastics)
AMIJIMA Sadao; FUJII Toru; SAGAMI Taisuke; MATSUOKA Takashi
Journal of the Society of Materials Science, Japan, The Society of Materials Science, Japan, 38(427) 347 - 353, 1989 - フェライト地球状黒鉛鋳鉄と極低炭素鋼における疲労微小き裂の発生と成長挙動
松岡 敬
鋳物, 日本鋳造工学会, 61(2) p85 - 91, 1989 - Fracture Toughness and Fatigue Crack Propagation Behavior of FRP
Proc. of ICCM7 Vol. 2, 1989 - Development of Pneumatic Servo Bearing Actuator for Nanometer Positioning
松岡 敬; Masato Kadotani; Takakazu Kitagawa; Satoshi Katto; Tomoko Hirayama; Takashi Matsuoka; Hiroshi Yabe; Katsumi Sasaki - Development of Pneumatic Servo Bearing Actuator for Nanometer Positioning
Books etc
- Mechanical Properties of Loosing Natural Fiber Reinforced Polypropylene
MATSUOKA Takashi; K. Mizuta; Y. Ichihara; T. Matsuoka; H. Fujita
High Performance Structure and Materials III, WIT Press, 2006, Joint work, 189-198, Scholarly book - 有機、無機材料における表面処理・改質の上手な方法とその手法
松岡 敬
技術情報協会, 2005, Joint work, 239-257, Scholarly book - 日本ゴム協会誌
松岡 敬; 藤田浩行; 坂口一彦
日本ゴム協会, 2004, Joint work, 77,2,60-64, Musical material - MATERIAL STAGE
松岡 敬
技術情報協会, 2002, Single work, 2,4,70, Musical material - 機械設計法
松岡 敬; 酒井達雄; 岩井保善; 岩井善郎; 内田仁; 小熊規泰; 小寺秀俊ほか
日本材料学会, 2001, Joint work, Scholarly book - 日本機械学会誌
松岡 敬
日本機械学会, 2000, Single work, 103,982,28-29, Musical material - 低温プラズマ処理を利用した高分子系複合材料の界面制御
松岡 敬
同志社工学会報, Single work, ４０,28-51, Musical material
Presentations
- Friction and Wear Properties of High Modulus Pitch-Based Carbon Reinforced Plastics with SiC Nanoparticles
MATSUOKA Takashi
10th International Conference on Composite Science and Technology, 2015 - Effect of Thickener Structure on Grease Film Formation and Tribological Properties
MATSUOKA Takashi
International Tribology Conference Tokyo 2015, 2015, Japan - Mechanism of Increase in EHL Oil Film Thickness by Formation with Sub-Micrometer Downsteps Adjacent to Contact Point
MATSUOKA Takashi
Malaysian International Tribology Conference 2015, 2015, Malaysian - Direct Observation of Adsorbed Additive Layer at Solid-Liquid Interface by Frequency-Modulation Atomic Force Microscopy
MATSUOKA Takashi
Malaysian International Tribology Conference 2015, 2015, Malaysian - Rheological Property of Boundary Layer Formed by Oiliness Additive Evaluated by A New Rheometer with Narrow Clearance
MATSUOKA Takashi
Malaysian International Tribology Conference 2015, 2015, Malaysian - Friction and Wear Properties of High Modulus Pitch-Based Carbon Reinforced Plastics with SiC Nanoparticles
MATSUOKA Takashi
ICCST/10, 2015 - 中性子反射率法によるトライボロジー現象理解のための展開
第49回京大原子炉実験所学術講演会, 2015 - O/Wエマルション圧延における添加剤の影響
2014年度極限環境対応極微細表面構造付与先進流体軸受研究会, 2015 - 潤滑グリースの油膜形成に及ぼす増ちょう剤の効果とその機構解明
2014年度極限環境対応極微細表面構造付与先進流体軸受研究会, 2015 - サブミクロンステップの形成によるEHL油膜厚さ増大メカニズムに関する考察
2014年度極限環境対応極微細表面構造付与先進流体軸受研究会, 2015 - テクスチャを有するロータリ切削工具と切りくず間の摩擦特性に関する流体潤滑解析
2014年度極限環境対応極微細表面構造付与先進流体軸受研究会, 2015 - ロケットエンジン用炭化水素ターボポンプに開発に向けたシールシステムの特性評価
日本機械学会関西支部第90期定時総会講演会, 2015 - テクスチャ付きロータリ工具と切りくず間の低摩擦化に関する解析的検討
精密工学会2015年度春季大会学術講演, 2015 - ミクロンすきまで作動する平板対向型レオメータによる境界潤滑膜のレオロジー特性評価
精密工学会2015年度春季大会学術講演, 2015 - ナノスクラッチに伴うマグネシウムの摩耗特性
日本金属学会2015年春期講演大会, 2015 - O/Wエマルション圧延における導入油膜形成に及ぼす油性剤の影響
トライボロジー会議春姫路2015, 2015 - ロケットエンジン用エタノールターボポンプ開発に向けたシールシステムの提案と評価
トライボロジー会議春姫路2015, 2015 - ATR-IR法によるリン酸エステルと鉄表面の化学反応分析
トライボロジー会議春姫路2015, 2015 - 光干渉機構付き平行平板型摩擦試験機によるナノテクスチャ基板間の油膜厚測定
トライボロジー会議春姫路2015, 2015 - 撥油コーティングによる流体潤滑下における界面すべりの実験的検証
トライボロジー会議春姫路2015, 2015 - SiCナノ粒子を添加した炭素繊維強化複合材料の摩擦摩耗特性の把握
トライボロジー会議春姫路2015, 2015 - 接触点を挟むサブミクロンオーダステップの形成によるEHL油膜厚さ増大メカニズムの解明
トライボロジー会議春姫路2015, 2015 - 中性子反射率法による親油性濃厚ポリマーブラシの構造解析
京大原子炉実験所 第47回学術講演会, 2014 - ナノスクラッチ摩耗試験によるマグネシウムの内部組織変形の把握
日本機械学会関西支部 第89期定時総会講演会, 2014 - 親油性濃厚ポリマーブラシ層の構造解析及びトライボロジー特性の関係
日本機械学会関西支部 第89期定時総会講演会, 2014 - 高圧エタノール潤滑下におけるフローティングリングシールの流量特性評価
日本機械学会関西支部 第89期定時総会講演会, 2014 - ポーラスカーボンを用いた静圧軸受型非接触吸着盤によるシリコンウエハの浮上および変形特性
精密工学会 2014年度春季大会, 2014 - 多連型空気静圧軸受パッドによるz-θ方向精密支持ジョイント機構の特性評価
精密工学会 2014年度春季大会講演, 2014 - 混合および境界潤滑領域での潤滑挙動に及ぼす微細周期構造の影響
精密工学会 2014年度春季大会講演, 2014 - 親油性濃厚ポリマーブラシのトライボロジー特性（第2報：溶媒中における構造，共振ずり特性，摩耗メカニズム）
トライボロジー会議春東京2014, 2014 - テクスチャ付摺動面におけるキャビテーション領域の圧力測定と修正キャビテーション理論の提案
トライボロジー会議春東京2014, 2014 - テクスチャ付きロータリ工具端面と切りくず間の流体潤滑解析
2014年度設計工学会秋季研究発表講演会, 2014 - 表面絞り型空気静圧軸受機構を用いた平板対向型レオメータの開発と潤滑油のレオロジー特性評価
2014年度設計工学会秋季研究発表講演会, 2014 - 各種その場分析法から見る添加剤吸着層の形成・脱離プロセス
トライボロジー会議秋岩手2014, 2014 - 親油性濃厚ポリマーブラシのトライボロジー特性（第3報：ストライベック曲線における挙動の把握）
トライボロジー会議秋岩手2014, 2014 - 共振ずり測定による油性剤添加潤滑油のナノすきま潤滑特性
トライボロジー会議秋岩手2014, 2014 - 周波数変調原子間力顕微鏡（FM-AFM）による表面／潤滑剤固液界面の断面イメージング像の取得
トライボロジー会議秋岩手2014, 2014 - 縫合複合糸を用いた織物強化複合材料の機械的特性及び破壊メカニズム
第6回自動車用途コンポジットシンポジウム講演, 2014 - 縫合複合糸を用いた織物強化複合材料の機械的特性と曲面成形性について
第6回先端複合材料センターコロキウム, 2014 - CNTの分散状態がCNT/PPS複合材料のトライボロジー特性に与える影響
第6回先端複合材料センターコロキウム, 2014 - マグネシウム合金のナノスクラッチ特性に及ぼす添加元素の影響
軽金属学会第127回秋期大会, 2014 - CNTの分散状態がCNT/PPS複合材料の摩擦・摩耗特性に与える影響
プラスチック成型加工学会 第22回秋季大会講演, 2014 - 弾性流体潤滑下での油膜厚さに及ぼすナノテクスチャリングの効果（続）
トライボロジー会議春東京2013, 2013 - 流体潤滑下におけるナノテクスチャリング特性に及ぼす表面粗さの影響
トライボロジー会議春東京2013, 2013 - DLC/DLC摺動のトライボロジー特性と油性剤添加の影響
トライボロジー会議春東京2013, 2013 - 放射光X線回折法による高圧高温下DLC膜の構造解析
トライボロジー会議春東京2013, 2013 - ナノスクラッチ試験による純Mgの内部組織変形の把握
日本金属学会2013秋期講演大会, 2013 - テクスチャ付摺動面におけるキャビテーション発生領域の観察と圧力測定
日本機械学会2013年度年次大会, 2013 - 放射光X線回折法を用いた静水圧下における各種潤滑油の構造解析
日本機械学会2013年度年次大会, 2013 - 多連型空気静圧軸受パッドによるθ方向超精密位置決め機構の特性評価
日本機械学会2013年度年次大会, 2013 - ATR-IR法による金属表面上の油性剤吸着層の化学物性測定
日本機械学会2013年度年次大会, 2013 - ダブルネットワーク（DN）ゲルの摩擦特性に及ぼす接触面積および面圧の影響
日本機械学会2013年度年次大会, 2013 - ATR-IR法による摩擦条件下における油性剤吸着層の形成・成長プロセスの把握
トライボロジー会議秋博多2013, 2013 - 放射光X線回折法による高圧下各種潤滑油の分子構造とトラクション係数との関係性
トライボロジー会議秋博多2013, 2013 - O/Wエマルション圧延におけるスターブ潤滑時のプレートアウト量が導入油膜形成に及ぼす影響
トライボロジー会議秋博多2013, 2013 - 親油性濃厚ポリマーブラシのトライボロジー特性（第1報）
トライボロジー会議秋博多2013, 2013 - ロータリー工具端面と切りくず間の流体潤滑解析
極限環境対応極微細表面構造付与先進流体軸受研究会 第3回研究会, 2013 - サブミクロンすきまにおける潤滑油のストライベック挙動
極限環境対応極微細表面構造付与先進流体軸受研究会 第3回研究会, 2013 - 表面絞り型静圧軸受機構を用いたサブミクロンすきま平行平板摩擦試験機の開発
極限環境対応極微細表面構造付与先進流体軸受研究会 第3回研究会, 2013 - 親油性濃厚ポリマーブラシの摩擦摩耗特性の把握
極限環境対応極微細表面構造付与先進流体軸受研究会 第3回研究会, 2013 - 共振ずり測定による添加剤吸着層のナノすきま粘度特性
極限環境対応極微細表面構造付与先進流体軸受研究会 第3回研究会, 2013 - 静圧軸受機構を用いたサブミクロンすきま平行平板摩擦試験機の開発
"超"を目指す軸受技術研究会 第42回講演会, 2013 - 親油性濃厚ポリマーブラシによる低摩擦摺動の実現
"超"を目指す軸受技術研究会 第42回講演会, 2013 - 親油性濃厚ポリマーブラシの構造解析とナノすきまにおける力学挙動
"超"を目指す軸受技術研究会 第42回講演会, 2013 - 縫合複合糸を用いた織物強化複合材料の成形及びその機械的特性について
第1回先端複合材料研究センターコロキウム, 2013 - 縫合複合糸を用いた織物強化複合材料の成形及びその機械的特性について
プラスチック成型加工学会 第21回秋季大会, 2013 - CNT添加PPS複合材料のトライボロジー特性に関する研究
プラスチック成型加工学会 第21回秋季大会, 2013 - 自動調圧カムを搭載したトラクションドライブ式2K-H型CVTの変速比に与える負荷トルクの影響
松岡 敬
日本機械学会 機素潤滑設計部門会議, 2012 - 中性子反射率測定を用いた固液界面における油性剤吸着層の厚さと密度に関する研究
松岡 敬
日本機械学会2012年度年次大会, 2012 - EHL下における工具表面テクスチャの潤滑効果
松岡 敬
日本機械学会2012年度年次大会, 2012 - ナノテクスチャリング特性に及ぼす表面粗さの影響に関する影響
松岡 敬
日本機械学会2012年度年次大会, 2012 - 油性剤含有潤滑下におけるDLC/DLC 摺動のトライボロジー特性
松岡 敬
日本機械学会2012年度年次大会, 2012 - 超精密位置決め用多連型空気圧サーボ軸受アクチュエータの特性評価
松岡 敬
日本機械学会2012年度年次大会, 2012 - FT-IR（フーリエ変換赤外分光法）による添加剤吸着層の分析
松岡 敬
日本機械学会2012年度年次大会, 2012 - エタノールターボポンプにおけるリップシールの特性評価
松岡 敬
日本機械学会2012年度年次大会, 2012 - 弾性流体潤滑下におけるスパイラル状ナノテクスチャリングの効果
松岡 敬
トライボロジー会議秋室蘭2012, 2012 - 金属表面上における油性剤吸着層の物理化学物性の把握（第1報：中性子反射率法および水晶発振子マイクロバランス法）
松岡 敬
トライボロジー会議秋室蘭2012, 2012 - 金属表面上における油性剤吸着層の物理化学物性の把握（第2報：フーリエ変換赤外分光法およびX線光電子分光法）
松岡 敬
トライボロジー会議秋室蘭2012, 2012 - 放射光X線回折法による高温・高圧下DLC膜の構造解析
松岡 敬
第53回高圧討論会, 2012 - Effect of Surface Roughness on Hydrodynamic Lubrication with Nano-Texturing
MATSUOKA Takashi
Abstract of ASME/STLE 2012 International Joint Tribology Conference, 2012 - Nano-Texturing for Expansion of Hydrodynamic Lubrication Regime
MATSUOKA Takashi
Abstract of ASME/STLE 2012 International Joint Tribology Conference, 2012 - Physical and Chemical Properties of Fatty Acids as Oiliness Additives
MATSUOKA Takashi
Abstract of ASME/STLE 2012 International Joint Tribology Conference, 2012 - Influence of Cyclic Stress on Interfacial Debonding in Natural Fiber Reinforced Composite
MATSUOKA Takashi
Full Paper of the 8th Asian-Australasian Conference on Composite Materials, 2012 - Pneumatic Servo Bearing Actuator with Multiple Bearing Pads for Ultraprecise Positioning
MATSUOKA Takashi
Short Paper of the 5th International Conference on Positioning Technology, 2012 - 産業利用を目的としたTOF型中性子反射率計の構築と評価
松岡 敬
第46回京都大学原子炉実験所学術講演会, 2012 - 潤滑下における水素含有DLCと鋼のトライボロジー特性
松岡 敬
表面技術協会主催第125回講演, 2012 - 潤滑添加剤の官能基が水素含有DLCと鋼のトライボロジー特性に及ぼす影響
松岡 敬
日本機械学会関西支部第87期定時総会講演, 2012 - 3K形CVTを用いた新型トルクコンバータの開発
松岡 敬
日本機械学会関西支部第87期定時総会講演, 2012 - 放射光X線回折を用いた高圧下オルトリン酸亜鉛の相変態挙動に関する研究
松岡 敬
日本機械学会関西支部第87期定時総会講演, 2012 - スパイラル溝付き動圧ジャーナル軸受におけるキャビテーション発生領域の検討
松岡 敬
日本機械学会関西支部第87期定時総会講演, 2012 - フラグメンテーション試験を用いたラミー繊維強化ポリプロピレンの損傷メカニズムの把握
松岡 敬
日本機械学会関西支部第87期定時総会講演, 2012 - O/Wエマルション圧延における油導入メカニズムの把握
松岡 敬
日本機械学会関西支部第87期定時総会講演, 2012 - 空気浮上式ガラス基板搬送装置におけるガラス基板の浮上・変形特性
松岡 敬
日本機械学会関西支部第87期定時総会講演, 2012 - テクスチャ付き摺動表面におけるキャビテーション発生領域の可視化
松岡 敬
精密工学会2012年春季大会講演, 2012 - 空気浮上式ガラス基板搬送装置におけるガラス基板の変形解析と実験的検証
松岡 敬
精密工学会2012年春季大会講演, 2012 - Mg-Y合金の潤滑下トライボロジー特性と摩擦に伴う内部組織の変形挙動に関する研究
松岡 敬
日本金属学会2012年春季大会講演, 2012 - O/Wエマルション圧延における油滴引き込みの影響
松岡 敬
日本鉄鋼協会・金属学会合同春季大会講演, 2012 - 産業利用を目的としたTOF型中性子反射率計の構築と評価
第46回京都大学原子炉実験所学術講演会, 2012 - 潤滑下における水素含有DLCと鋼のトライボロジー特性
表面技術協会主催第125回講演, 2012 - 潤滑添加剤の官能基が水素含有DLCと鋼のトライボロジー特性に及ぼす影響
日本機械学会関西支部第87期定時総会, 2012 - 3K形CVTを用いた新型トルクコンバータの開発
日本機械学会関西支部第87期定時総会, 2012 - 放射光X線回折を用いた高圧下オルトリン酸亜鉛の相変態挙動に関する研究
日本機械学会関西支部第87期定時総会, 2012 - スパイラル溝付き動圧ジャーナル軸受におけるキャビテーション発生領域の検討
日本機械学会関西支部第87期定時総会, 2012 - フラグメンテーション試験を用いたラミー繊維強化ポリプロピレンの損傷メカニズムの把握
日本機械学会関西支部第87期定時総会, 2012 - O/Wエマルション圧延における油導入メカニズムの把握
日本機械学会関西支部第87期定時総会, 2012 - 空気浮上式ガラス基板搬送装置におけるガラス基板の浮上・変形特性
日本機械学会関西支部第87期定時総会, 2012 - テクスチャ付き摺動表面におけるキャビテーション発生領域の可視化
精密工学会2012年春季大会, 2012 - 空気浮上式ガラス基板搬送装置におけるガラス基板の変形解析と実験的検証
精密工学会2012年春季大会, 2012 - Mg-Y合金の潤滑下トライボロジー特性と摩擦に伴う内部組織の変形挙動に関する研究
日本金属学会2012年春季大会, 2012 - O/Wエマルション圧延における油滴引き込みの影響
日本鉄鋼協会・金属学会合同春季大会, 2012 - 自動調圧カムを搭載したトラクションドライブ式2K-H型CVTの
日本機械学会 機素潤滑設計部門会議, 2012 - 中性子反射率測定を用いた固液界面における油性剤吸着層の厚さと密度に関する研究
日本機械学会2012年度年次大会, 2012 - EHL下における工具表面テクスチャの潤滑効果
日本機械学会2012年度年次大会, 2012 - ナノテクスチャリング特性に及ぼす表面粗さの影響に関する影響
日本機械学会2012年度年次大会, 2012 - 油性剤含有潤滑下におけるDLC/DLC 摺動のトライボロジー特性
日本機械学会2012年度年次大会, 2012 - 超精密位置決め用多連型空気圧サーボ軸受アクチュエータの特性評価
日本機械学会2012年度年次大会, 2012 - FT-IR（フーリエ変換赤外分光法）による添加剤吸着層の分析
日本機械学会2012年度年次大会, 2012 - エタノールターボポンプにおけるリップシールの特性評価
日本機械学会2012年度年次大会, 2012 - 弾性流体潤滑下におけるスパイラル状ナノテクスチャリングの効果
トライボロジー会議秋室蘭2012, 2012 - 金属表面上における油性剤吸着層の物理化学物性の把握（第1報：中性子反射率法および水晶発振子マイクロバランス法）
トライボロジー会議秋室蘭2012, 2012 - 金属表面上における油性剤吸着層の物理化学物性の把握（第2報：フーリエ変換赤外分光法およびX線光電子分光法）
トライボロジー会議秋室蘭2012, 2012 - ロータリ切削工具を用いたマシニング加工における表面テクスチャ効果
日本機械学会 第9回生産加工・工作機械部門講演会, 2012 - 放射光X線回折法による高温・高圧下DLC膜の構造解析
第53回高圧討論会, 2012 - ロケットエンジン用ターボポンプにおける軸受保持器材のトライボロジー特性評価
松岡 敬
トライボロジー会議2011春東京, 2011 - 添加剤を含む潤滑油下における純マグネシウムの摩擦摩耗特性の評価
松岡 敬
日本金属学会2011年度秋期講演大会, 2011 - 綿/PP縫合複合糸を用いた織物強化複合材料に関する基礎的研究
松岡 敬
第3回自動車用途コンポジットシンポジウム, 2011 - フラグメンテーション試験を用いた繊維配置の異なるモデルNFRPの損傷機構の把握
松岡 敬
第3回自動車用途コンポジットシンポジウム, 2011 - 繰り返し引張荷重負荷によるラミー/PP複合材料の損傷メカニズム把握
松岡 敬
第3回自動車用途コンポジットシンポジウム, 2011 - Effect of Fiber Interval on Tensile Strength of Fiber Reinforced Plastics in Multi-Fiber Fragmentation Test
MATSUOKA Takashi
Proc. of Materials Characterisation 2011, 2011 - Effect of Acid Additive Adsorption under Mixed-Lubricated Condition
MATSUOKA Takashi
Abstract for Tribochemistry, 2011, Hagi - Tribological Properties of Si-Doped and Ti-doped DLC/DLC Slidings
MATSUOKA Takashi
Abstract for Tribochemistry, 2011, Hagi - Tribological Properties of PTFE Retainer in Ball Bearing for Liquid Rocket Engine
MATSUOKA Takashi
Abstract for Tribochemistry, 2011, Hagi - Structural Analysis of DLC Film under Hydrostatic High Pressure by Synchrotron X-Ray Diffraction
MATSUOKA Takashi
Extended abstract of International Tribology Conference, 2011, Hiroshima - Tribological Properties of Ball Bearings with PTFE Retainers for Liquid Rocket Engine
MATSUOKA Takashi
Extended abstract of International Tribology Conference, 2011, Hiroshima - Thickness and Density of Adsorbed Acid Additive Layer by Neutron Reflectometry
MATSUOKA Takashi
Extended abstract of International Tribology Conference, 2011, Hiroshima - Influence of O/W Emulsion Introduction on Oil Film Formation in Rolling Process
MATSUOKA Takashi
Extended abstract of International Tribology Conference, 2011, Hiroshima - Nano-Motion X-Y Stage by Pneumatic Servo Spherical Bearing Actuators
MATSUOKA Takashi
Extended abstract of 4th ASPEN2011, 2011 - Lubricated Friction Reduction by Spiral-Groove-Shape Nano-Texturing
MATSUOKA Takashi
Extended abstract of 4th ASPEN2011, 2011 - Development of TOF-Mode Neutron Reflectometer and Its Application to Tribology Study
MATSUOKA Takashi
TAbstract of 1st AOCNS 2011, 2011 - 中性子反射率法による表面吸着層構造解明へのアプローチ
京都大学原子炉実験所学術講演会, 2011 - 中性子反射率法による金属/潤滑油界面の構造解析へのアプローチ
JRR-3 改造20周年記念シンポジウム, 2011 - ロケットエンジン用ターボポンプにおける軸受保持器材のトライボロジー特性評価
日本航空宇宙学会北部支部2011年講演, 2011 - 表面絞り型空気静圧軸受の支持物体微小振れ発生メカニズム解明に関する研究
日本機械学会関西支部 第86期定時総会・講演会, 2011 - ナノテクスチャリングによる潤滑下摩擦の低減
日本機械学会関西支部 第86期定時総会・講演会, 2011 - 超精密位置決め用空気圧サーボ軸受アクチュエータの長ストローク化
日本機械学会関西支部 第86期定時総会・講演会, 2011 - 綿/PP縫合複合糸を用いた織物強化複合材料の開発
日本機械学会関西支部 第86期定時総会・講演会, 2011 - 放射光X線回折を用いた高圧下DLC膜の構造解析
日本機械学会関西支部 第86期定時総会・講演会, 2011 - SiおよびTi添加DLC/DLC接触の摺動特性に関する研究
日本機械学会関西支部 第86期定時総会・講演会, 2011 - 往復動用リップシールメニスカス形状の観察と数値シミュレーション
日本機械学会関西支部 第86期定時総会・講演会, 2011 - 埋蔵繊維モデルによる繊維強化複合材料の引張特性の把握
複合材料研究センター2010年度成果発表会, 2011 - ロケットエンジン用ターボポンプにおける軸受保持器材のトライボロジー特性評価
トライボロジー会議2011春東京, 2011 - 添加剤を含む潤滑油下における純マグネシウムの摩擦摩耗特性の評価
日本金属学会2011年度秋期講演大会, 2011 - 綿/PP縫合複合糸を用いた織物強化複合材料に関する基礎的研究
第3回自動車用途コンポジットシンポジウム, 2011 - フラグメンテーション試験を用いた繊維配置の異なるモデルNFRPの損傷機構の把握
第3回自動車用途コンポジットシンポジウム, 2011 - 繰り返し引張荷重負荷によるラミー/PP複合材料の損傷メカニズム把握
第3回自動車用途コンポジットシンポジウム, 2011 - 中性子反射率法を用いた金属表面における添加剤層の膜厚測定
京都大学原子炉実験所 第44会学術講演会, 2010 - 空気圧サーボ軸受アクチュエータを用いた超精密位置決めXYθステージの開発
日本機械学会関西支部 第85期定時総会・講演会, 2010 - 放射光X線回折法を用いたトラクションオイルの構造解析
日本機械学会関西支部 第85期定時総会・講演会, 2010 - 静圧軸受型液晶搬送装置における薄板ガラスの浮上変形特性
日本機械学会関西支部 第85期定時総会・講演会, 2010 - 3K型CVTにおけるサイドスリップに関する研究
日本機械学会関西支部 第85期定時総会・講演会, 2010 - マッサージチェアにおける揉み心地及びマッサージ効果の定量的評価
日本機械学会関西支部 第85期定時総会・講演会, 2010 - 中性子反射率法を用いた金属／潤滑油界面における吸着分子層のナノ構造解析
日本機械学会関西支部 第85期定時総会・講演会, 2010 - 空気圧サーボ軸受アクチュエータを用いた超精密位置決めXYステージの開発
日本機械学会関西支部 第85期定時総会・講演会, 2010 - 中性子反射率法による潤滑摩擦面の吸着層解析とそのトライボロジー特性
日本機械学会 2010年度機素潤滑部門講演会, 2010 - 超精密位置決め用空気圧サーボ軸受アクチュエータの開発（第6報：XYステージへの応用）
トライボロジー会議2010春東京, 2010 - 放射光X線回折による高圧下潤滑油の構造解析（第3報：静水圧下およびEHL下におけるトラクションオイルの構造変化）
トライボロジー会議2010春東京, 2010 - 縫合綿/PP複合糸を用いた織物強化複合材料の開発
日本材料学会 第59期学術講演会, 2010 - 往復動用リップシールのメニスカス形状
トライボロジー秋の学校in福井－集まれ！若きトライボロジスト！－, 2010 - 金属添加DLC同士の摺動による摩擦面の低摩擦化
トライボロジー秋の学校in福井－集まれ！若きトライボロジスト！－, 2010 - 多連型超精密位置決め用空気圧サーボ軸受アクチュエータの長ストローク化
トライボロジー秋の学校in福井－集まれ！若きトライボロジスト！－, 2010 - ナノテクスチャリングによる潤滑下摩擦の低減
トライボロジー秋の学校in福井－集まれ！若きトライボロジスト！－, 2010 - 放射光X線回折法による高圧下DLC膜の構造解析
トライボロジー秋の学校in福井－集まれ！若きトライボロジスト！－, 2010 - マグネシウム合金における単相組織の分散形態と耐摩耗性の関連性
トライボロジー秋の学校in福井－集まれ！若きトライボロジスト！－, 2010 - Hydrodynamic Bearing with Non-Uniform Spiral Grooves for High-Speed HDD Spindle
松岡 敬
Extended Abstract of The 13th IEEE Int. Symp. on Consumer Electronics, 2009 - Development of Aerostatic Porous Bearing Guide for Large Glass Sheets in Liquid Crystal Display Manufacturing Equipment
松岡 敬
Extended Abstract of ICMDT2009, Jeju Island, 2009, Jeju Island - Application of Pneumatic Servo Bearing Actuators for XYθ Ultraprecise Positioning Stage
松岡 敬
Extended Abstract of ICMDT2009, Jeju Island, 2009, Jeju Island - Thickness of Additive Layer on Metal Surfaces Measured by Neutron Reflectometry and Its Effect to Tribological Properties
松岡 敬
Extended Abstract of ICMDT2009, Jeju Island, 2009, Jeju Island - Phase Transition Characteristics of Machine Oils under High Pressure Analyzed by Synchrotron Radiation X-Ray Diffraction
松岡 敬
Extended Abstract of ICMDT2009, Jeju Island, 2009, Jeju Island - Reduction of Nano-Fluctuations of Aerostatic Thrust Bearings with Surface Restriction
松岡 敬
Extended Abstract of ICMDT2009, Jeju Island, 2009, Jeju Island - Development of Pneumatic Servo Bearing Actuator for Nano-Positioning
松岡 敬
Extended Abstract of JSME-IIP/ASME-ISPS Joint Conference on MIPE 2009, 2009 - Structural Analysis of Solid-Liquid Interface Using Neutron Reflectometry
松岡 敬
Abstract of Tribochemistry 2009, 2009 - Microscopic Structures of Base Oils under High Pressure Using Synchrotron X-Ray Diffraction
松岡 敬
Abstract of Tribochemistry 2009, 2009 - Heat-Oxidative Stability of Silicon-Doped DLC Films Deposited by PBIID
松岡 敬
Abstract of Tribochemistry 2009, 2009 - Theoretical Analysis of Aerostatic Porous Bearing Guide for Large Glass Sheets in Liquid Crystal Display Manufacturing Equipment
松岡 敬
Extended Abstract of World Tribology Congress 2009, 2009 - Synchrotron X-Ray Diffraction Analysis of Lubricants under High Pressure
松岡 敬
Extended Abstract of World Tribology Congress 2009, 2009 - Ultraprecise Positioning X-Y Stage Composed of Pneumatic Servo Bearing Actuators
松岡 敬
Extended Abstract of World Tribology Congress 2009, 2009 - Density of Lubricants near DLC Film Surface Having Different Wettability Measured by Neutron Reflectometry
松岡 敬
Extended Abstract of World Tribology Congress 2009, 2009 - 放射光X線回折法による高圧下潤滑油の構造解析（第2報：基油の相転移挙動とその構造）
トライボロジー会議春東京, 2009 - マッサージチェアにおける揉み心地評価及びマッサージ効果に関する研究
日本機械学会 第20回バイオフロンティア講演会, 2009 - 静圧軸受型液晶搬送装置における薄板ガラス板の浮上変形特性
日本設計工学会 平成21年度研究発表講演会, 2009 - 3K型CVTにおけるサイドスリップ力に関する研究
日本設計工学会 平成21年度研究発表講演会, 2009 - Density of Lubricant near Surfaces Having Various Wettabilities In-situ Measured by Neutron Reflectometry
松岡 敬
Proc. of 63rd Annual meeting & Exhibition STLE 2008 Cleveland, 2008, Cleveland - Fundamental Study about Oil Leakage from Fluid Film Bearing
松岡 敬
Proc. of 63rd Annual meeting & Exhibition STLE 2008 Cleveland, 2008, Cleveland - Structure Analysis of Interafce between DLC Films having Various Wettabilities and Lubricants Using Neutron Reflectometry
松岡 敬
Proceedings of the STLE/ASME International Joint Tribology Conference 2008, 2008 - Pneumatic Servo Bearing Actuator for Ultraprecise Positioning : Part 1
松岡 敬
Proceedings of 23rd ASPE Annual Meeting and 12th ICPE, 2008 - Development of Pneumatic Servo Bearing Actuator for Ultraprecise Positioning
松岡 敬
Proceedings of Interseminar between Chonmam National Univ. and Doshisha Univ., 2008 - Frequency Analysis of Hard Disk Drive Spindle System Supported by Hydrodynamic Bearings
松岡 敬
JSME-KSME Joint International Conference on Manufacturing Machine Design, 2007 - Pneumatic Servo Bearing Actuator for Ultraprecise Positioning
松岡 敬
STLE/ASME International Joint Tribology Conference, 2007 - Structure Analysis of Base Oils under High Pressure
松岡 敬
Synopsis of 34th Leeds-Lyon Symp. on Tribology, 2007 - Water Density Near Surface of DLC Films Having Various Surface Energies
松岡 敬
Synopsis of 34th Leeds-Lyon Symp. on Tribology, 2007 - Effects of Deposition Conditions on Adhesion of DLC Films Prepared by UBM Sputtering
松岡 敬
the Sixth Asian-European International Conference on Plasma Surface Engineering, 2007, 長崎 - Improvement of Copper Plating Adhesion of PPE Printed Wiring Board by Plasma Treatment
松岡 敬
the Sixth Asian-European International Conference on Plasma Surface Engineering, 2007, 長崎 - Analysis and Experimental Study of Oil Leakage from Fluid Bearing
松岡 敬
Rotrib2007, 2007, ハンガリー - Study on Reduction of Nano-Fluctuations of Aerostatic Bearing with Surface Restriction
松岡 敬
Rotrib2007, 2007, ハンガリー - Analysis and Experimental Study of Oil Leakage from Fluid Bearing
松岡 敬
Malaysia-Japan International Symposium on Advanced Technology 2007, 2007, マレーシア - Nano-fluctuations of Pneumatic Servo Bearing Actuator for Ultraprecise Positioning
松岡 敬
Malaysia-Japan International Symposium on Advanced Technology 2007, 2007, マレーシア - Heat Resistance of Silicone-Doped DLC Films Deposited by PBIID
松岡 敬
Malaysia-Japan International Symposium on Advanced Technology 2007, 2007, マレーシア - Effect of Wear Particles on Run-out Characteristics of Hydrodynamic Bearings
松岡 敬
Malaysia-Japan International Symposium on Advanced Technology, 2007, マレーシア - Influence of Ethylene Plasma Polymerization on Interfacial Adhesion
松岡 敬
The Second Joint Vietnam-Japan Workshop on Green Composite, 2007, ベトナム - Finite Element Stress Analysis of the Intervertebral Disc
松岡 敬
Third Asian Pacific Conference on Biomechanics, 2007, 中国 - Dynamic Analysis of a Coupled Journal and Thrust Spiral-Grooved Bearing in Hard Disk Drive System for Good Vibration Performance
松岡 敬
Viennano'07, 2007 - New Actuator for Nano Motion Using Active-Controlled Aerostatic Bearing
松岡 敬
Viennano'07, 2007 - Optimization of Groove Dimensions in Spiral-Grooved Journal Bearings for RRO or NRRO Characteristics
松岡 敬
STLE/ASME International Joint Tribology Conference, 2006 - Optimization of Groove Dimensions in Spiral-Grooved Journal Bearings for Run-out Characteristics with Experimental Verifications
松岡 敬
Austrib'06, 2006 - Measurement of Thickness of Thin Lubrication Film at Solid-Solid Interface by Neutron RefLectometory
松岡 敬
Austrib'06, 2006 - Microscopic Structure Analysis of Base Oils under High Pressure Using X-ray Diffraction
松岡 敬
Austrib'06, 2006 - Tribological Properties of Diamond-like-carbon Coatings Deposited on Polyphenilene-sulfide
松岡 敬
EUROMAT2005, 2005, プラハ - Study on Slip Ratio and Stall Torque for 3K Type Traction Drive CVT
松岡 敬
1st International Conference on Design Eng. and Sci., 2005, ウイーン - Influence of Spin on Efficiency of 2K-H Type Traction Drive CVT
松岡 敬
the 1st International Conference on Design Eng. and Sci., 2005, ウイーン - Mechanical Properties of Loosing Natural Fiber Reinforced Composites
松岡 敬
China-Japan Joint Seminar on Green Composites, 2005, 中国
Works
Industrial Property Rights
Research Projects
- Dynamic Behavior of Boundary Lubrication Analyzed by Quantum Beam with Mechano-Operando Mechanism
Takashi Matsuoka
In this study, we aimed to analyze the dynamic behavior of the boundary lubrication layer under sliding conditions by sublimating the conventional in-situ analysis to operando analysis in response to the strong need for clarifying the dynamic behavior of the boundary lubrication layer. Specifically, the dynamic behavior of the boundary lubrication layer under sliding conditions was investigated by combining various quantum beam analyses with a sample holder having sliding mechanism. As a result, it was confirmed that the interfacial structure and chemical state of the boundary lubrication layer could be obtained by neutron reflectometry and synchrotron-XAFS. In addition, we succeeded in obtaining the boundary lubrication layer behavior under the sliding condition by installing the sliding mechanism in those beamlines., Japan Society for the Promotion of Science, Grants-in-Aid for Scientific Research, 2018/04 -2021/03, Grant-in-Aid for Scientific Research (B), Doshisha University - Structure and Low Friction Mechanism of Soft Boundary Layers in Narrow Clearnce
Hirayama Tomoko; MATSUOKA Takashi
Understanding of the real situation of solid-liquid interface under sliding condition is quite important to clarify the tribology phenomena under lubrication. Particularly, though the soft molecular chains, called as 'boundary layers', are believed to form onto the top of low friction surfaces, their structures and physical properties are still unknown. From these backgrounds, the lubrication properties of boundary layers formed by additives in narrow clearance on sub-micrometer order were investigated in the study using a newly-developed plate-on-plate tribometer. The experimental results showed that the apparent viscosity of sample lubricant with additive decreased compared as that without additive. It indicated that the boundary layer formed by additive may induce the interfacial slip, thus resulting in decrease of apparent viscosity., Japan Society for the Promotion of Science, Grants-in-Aid for Scientific Research, 2013/04 -2016/03, Grant-in-Aid for Scientific Research (B), Doshisha University - 添加剤によって形成された境界潤滑層のイメージングとナノすきま摺動特性の把握
基盤研究（Ｂ）（一般）, 2014 -2016, Competitive research funding - 高感度反射FT-IR機構付き中性子反射率計の開発と摩擦調整剤吸着メカニズムの解明
基盤研究（Ｂ）（一般）, 2011 -2013, Competitive research funding - 放射光X線回折法によるEHL条件下潤滑油の構造解析
萌芽研究, 2009 -2010, Competitive research funding - 中性子反射率法による物質/潤滑剤固液界面のナノ構造解析
基盤研究（Ｂ）（一般）, 2008 -2010, Competitive research funding - DLC膜の表面エネルギーが潤滑油形成能に及ぼす影響とそのトライボロジー特性の把握
基盤研究（Ｃ）（一般）, 2006 -2007, Competitive research funding - STUDY ON IMPROVEMENT OF MECHANICAL PROPERTIES OF CFRP DUE TO RUBBER MODIFICATION OF EPOXY MATRIX USING SUBMICRON SPHERES
FUJII Toru; MATSUOKA Takashi
Firstly, in order to obtain information on improvement of interfacial strength properties between rpoxy eesin and substrate due to rubber modification using submicron CNBR (Cross-linked acrylo Nitrile Butadiene Rubber : 70-100 nm in diameter) spheres, adhesive strenghts of an epoxy resin under Mode I loadings (both static and cyclic) were examined using DCB specimens. The experimental results revealed that The adhesive strength of the epoxy resin became maximum when the CNBR volume fraction was 10%. The interfacial strengths were greatly improved due to CNBR rubber modification under static loading as well as under cyclic loading when the fatigue crack growth rate was relatively high. In both cases, fracture occurred in a cohesive manner while interfacial failure occurred at low crack velocity including near threshold. In this case, the threshold was not improved due to rubber modification. Crabon fabric was used to evaluate the effect of rubber modification of epoxy matrix on strength properties of CFRP.The laminates used in the study were fabricated by the hand-lay-up method. Tensile and compressive strenghts under static loading and fatigue strength at several temperatures were measured as well as inter-laminar strength under Mode I loading. The following conclusions were drawn from the experiment. Mode I inter-laminar strength (fracture toughness) is greatly improved due to CNBR modification at a wide range of environmental temperature. It is more than two times higher than that for unmodified cases. Impact strength is also improved while on strength reduction in tension at any test temperature occurs as well as in compression. No reduction in Tg (glassy transition temperature) due to CNBR modification is found as well. That is one of reason for no degradaiton in both tensile and compressive strength properties. CNBR modification of epoxy matrix does not badly affects on the fatigue life of CFRP.Any life reduction was found due to inclusion of submicron spheres of CNBR., Japan Society for the Promotion of Science, Grants-in-Aid for Scientific Research, 1996 -1997, Grant-in-Aid for Scientific Research (C), DOSHISHA UNIVERSITY - EFFECT OF INTERFACIAL PROPERTIES ON STATIC AND FATIGUE OF SHORT GLASS FIBER REINFORCED THERMOPLASTICS
FUJII Toru; MATSUOKA Takashi
Firstly, the effect of interfacial properties between fibers and thermoplastic matrix (mainly Polypropylene) on static and fatigue failure of short glass fiber reinforced thermoplastics fabricated by injection molding and stamping was studied. From the test results it was revealed that the static strength of the FRTP sample fabricated using long fiber pellets was higher than that of the sample fabricated by conventional injection molding using short fiber pellets. The yielding stres was also increased by using long fiber pellets. However, the longitudinal modulus does not increase due to long fiber pellets. As fibers in the pellets are broken during injeciton molding process, 8 to 10 mm in length in pellets is enough to improve the static strength for long fiber pellets. On the other hand, no significant effect of usage of long fiber pellets on high cycle fatigue is found although long fiber pellets are effective to increase the fatigue life at low cycle fatigue. The fatigue life is increased 30-80% longer by using long fiber pellets at low cycle fatigue. The creep behavior is also improved much due to long fibers. Although PP matrix itself does not absorb water, PP matrix short glass fiber composites (FRTP) absorbs appreciable water. Water penetrates inside through the interface between blass fibers and the matrix. Due to water absorption, not only static strength but also fatigue strength decrease. However, the strength reduction under static loading is only about 20%. A possibility for fabricating PP-based FRTP which have high performance but being not expensive was shown by using low temperature plasma. In this method, PP sheets whose surfaces have been previously treated are stacked with glass fabrics and pressed to form FRTP.Due to this surface treatment, peeling strength increases as high as 50%. The static strength increases about 20%. Lastly, the effect of rubber modification of epoxy matrix using cross-linked NBR submicron spheres on both static and fatigue strengths of CFRP were shown. Due to rubber modification, the interfacial strength between carbon fibers and epoxy matrix is improved., Japan Society for the Promotion of Science, Grants-in-Aid for Scientific Research, 1994 -1995, Grant-in-Aid for General Scientific Research (C), DOSHISHA UNIVERSITY - 新型溝形状を有する高回転精度流体動圧軸受の開発
日本学術振興会各種事業, Competitive research funding - 炭素繊維複合糸から作製する立体形状成形プリフォームの開発
研究成果最適展開支援プログラム A-STEP, 日本学術振興会各種事業, Competitive research funding - Study on Plasma Treatment on Composite Materials
Competitive research funding - Study on Properties of Friction on Composites.
Competitive research funding - 小型無段変速機の開発とその性能評価
Competitive research funding - 超精密位置決め用空気圧サーボ軸受アクチュエータの開発とその応用
Competitive research funding - 精密機器用動圧スピンドルの特性把握とその高性能化
Competitive research funding - タイミングチェーン／ガイド間の油膜厚測定とその低摩擦化
Competitive research funding - エタノールターボポンプの開発に向けたシールシステムの特性評価
Competitive research funding - 放射光X線回折法による高圧下潤滑油の構造解析
Competitive research funding - 潤滑グリースの油膜形成に及ぼす増ちょう剤の効果とその機構解明
Competitive research funding - 撥油コーティングによる界面すべりの実証とそのメカニズムの提案
Competitive research funding - ナノテクスチャによる流体潤滑および弾性流体潤滑特性の向上とその応用
Competitive research funding - 狭小すきま平板対向型摺動試験機による添加剤境界潤滑層の摺動特性の把握
Competitive research funding - 各種表面・界面分析法による添加剤境界潤滑層の構造および形成メカニズムの解明
Competitive research funding - ナノスクラッチによるマグネシウム合金の摩耗メカニズムの解明と新型複合材料の提案
Competitive research funding - 木材強化複合材料における木材／樹脂界面の観察と微視的摩耗特性の把握
Competitive research funding - ナノ粒子分散系複合材料の開発とトライボロジー特性の把握
Competitive research funding - 炭素繊維と樹脂から成る複合糸を用いた織物強化複合材料の開発と機械的特性評価
Competitive research funding - 縫合繊維強化複合材料の開発とその機械強度特性に関する研究
Competitive research funding - 複合材料におけるプラズマ処理に関する研究
Competitive research funding - 複合材料の摩擦特性に関する研究
Competitive research funding
Research Seeds
- Development of Fabric Composites Reinforced by Carbon Fiber Covered by Polyamide FibersResearch Fields: Chemicals, Nanotechnology and Materials, Machinery and Measuring Equipment, Environment and EnergyAffiliation/Name: Takashi Matsuoka:Tomoko Hirayama
Patent Information: 特願 2008-298009, 特願 2011-060069, 特願 2011-234464 - Multiple Analyses and Evaluations of Boundary Lubrication Layers on Top Surface for Low-Friction PropertyResearch Fields: Machinery and Measuring EquipmentAffiliation/Name: Takashi Matsuoka:Tomoko Hirayama
- Optimum Texturing Designing for Low-Friction Sliding SurfacesResearch Fields: Machinery and Measuring EquipmentAffiliation/Name: Takashi Matsuoka:Tomoko Hirayama
- Optimum Designing of Hydrodtatic/Hydrodynamic Bearings and Its Application for Ultraprecise Positioning ActuatorResearch Fields: Machinery and Measuring EquipmentAffiliation/Name: Takashi Matsuoka:Tomoko Hirayama
