| TANAKA Kazuto |  |
| Faculty of Life and Medical Sciences Department of Biomedical Engineering | |
| Professor |
Last Updated :2025/04/29
Researcher Profile and Settings
researchmap
Research Interests
- Development of Evaluation Methods for Mechanical Properties of Micro-Materials
- Fabrication of Biomaterials
- Process Design and Evaluation of Mechanical Properties for Composite Materials,
- Development of Moulding Process for thermoplastic composites
Research Areas
- Manufacturing technology (mechanical, electrical/electronic, chemical engineering) / Machine materials and mechanics / Process Design and Evaluation of Mechanical Properties of Engineering Materials
Research History
- 1996-1998 Engaged in research on the Effects of Environment on Impact and Fatigue Fracture Behavior of Fiber Reinfoced Plastic.
- 1999-2001 Engaged in research on the Characterization of the Aramid/Epoxy Interfacial Properties by means of Pull-out Test and Influence of Water Absorption
- 2000-2002 Engaged in research on the Evaluation of Mechanical Properties of Stainless Steel Microelements Manufactured by Electrical Discharge Machining
- 2001- Engaged in research on the Influence of Wet Environment on Tensile and Fatigue Fracture Behavior of Silica Glass Fiber
- 2002- Engaged in research on the Development of the TestingSystem of Materials for MEMS (Micromaterial)
- 2005- Engaged in research on the Biomaterials
- 2006- Engaged in research on the Development of Molding Process of Carbon Fiber Reinforced Thermoplastic
Research Experience
- Doshisha University, Faculty of Life and Medical Sciences, Professor, 2011/04 - Today
- University of Sydney, School of Aerospace Mechanical and Mechatronic Engineering, Visiting Researcher, 2018/12 - 2019/03
- Delft University of Technology, Faculty of Aerospace Engineering, Guest researcher, 2010/08 - 2011/08
- Doshisha University, Faculty of Life and Medical Sciences, Associate Professor, 2008/04 - 2011/03
- Doshisha University, Faculty of Engineering, Associate Professor, 2007/04 - 2008/03
- Doshisha University, Faculty of Engineering, Associate Professor, 2005/04 - 2007/03
- Kyoto University, Graduate School of Engineering, Lecturer (full-time position), 2004/01 - 2005/03
- Kyoto University, Graduate School of Engineering, Research Associate, 1998/08 - 2003/12
Education
- Kyoto University, Graduate School of Engineering, Department of Mechanical Engineering, 1996/04 - 1998/07
- KTH Royal Institute of Technology, Sweden, 航空工学科, Division of Lightweight Structures, 1997/04 - 1998/04
- Kyoto University, Graduate School of Engineering, Department of Mechanical Engineering, 1994/04 - 1996/03
- Kyoto University, Faculty of Engineering, Department of Mechanical Engineering, 1990/04 - 1994/03
Degree
Association Memberships
- SAMPE JAPAN
- The Society of Automotive Engineers of Japan
- The Japan Society for Composite Materials
- The Japan Society of Mechanical Engineers
- The Society of Materials Science, Japan
Committee Memberships
- 代表会員, 2024/04 - Today, 日本機械学会
- Global Board of Directors, 2022/09 - Today, SAMPE Japan, Society
- 疲労部門委員会 幹事, 2002/09 - Today, 日本材料学会, Society
- 企画幹事長, 2022/04 - 2024/03, 日本機械学会関西支部, Society
- Vice President, 2018/07 - 2022/09, SAMPE Japan, Society
- Member, 2019/04 - 2021/03, The Japan Society of Mechanical Engineers, Society
- Composite Committee Director, 2014/07 - 2018/06, SAMPE Japan, Society
- 代表会員, 2017/04 - 2018/03, 日本機械学会, Society
- 理事, 2015/05 - 2017/04, 日本材料学会, Society
Awards
- 令和5年度 日本材料学会 複合材料部門委員会 論文賞
Jun. 2024, 日本材料学会複合材料部門委員会, 連続ガラス繊維強化樹脂複合材料を用いたプレス射出ハイブリッド成形体の界面接合強度に及ぼすポリプロピレン/ポリアミドマトリックスハイブリッド化の影響 - 令和5年度 論文賞
May 2024, 日本材料学会, 高温下における炭素繊維強化ポリアミド樹脂の繊維樹脂界面せん断強度に及ぼす樹脂へのシリカ添加の影響 - JSME FELLOW
Feb. 2023, JSME - JCOM Award for Scientific Paper 2021
Dec. 2022, JSMS Committee on Composite Materials, Friction Stir Spot Welding for CFRP/Al with Polyamide Resin - 功績賞
Jul. 2018, 先端材料技術協会 - JCOM Award for Scientific Papers 2016
Jun. 2017, JSMS Committee on Composite Materials, Effect of Carbon Nanotubes Deposition Form on Carbon Fiber and Polyamide Resin Interfacial Strength, Japan - 日本塑性加工学会賞
2009 - 日本機械学会材料力学部門優秀講演表彰
2005, Japan - 日本材料学会学術奨励賞 日本材料学会「先進複合材料およびマイクロマテリアルの破壊・疲労特性に及ぼす環境効果に関する研究」
2003, Japan - 日本機械学会奨励賞 日本機械学会「繊維強化樹脂基複合材料の衝撃および疲労破壊特性に及ぼす環境効果の研究」
2003, Japan - 第51期日本材料学会優秀講演発表賞 日本材料学会「高精度放電加工による金属薄膜微小試験片の創製と引張・疲労破壊特性評価」
2002, Japan - 優秀研究発表賞 日本材料学会疲労部門委員会「アラミド単繊維の疲労に及ぼす応力波形・湿潤ガス環境効果とAFMによる疲労損傷評価」
2001, Japan
Published Papers
- Evaluation of Joint Strength for CFRPs and Aluminum Alloys by Friction Stir Spot Welding Using Multi-Stage Heating
Kazuto Tanaka; Yusuke Aiba
Journal of Composites Science, 8(3), Mar. 2024, Scientific journal - Effects of the Injection Material and Resin Layer on the Mechanical Properties of Carbon Fiber-Reinforced Thermoplastic (CFRTP) Press and Injection Hybrid Molded Parts
Kazuto Tanaka; Masaki Taniguchi
Journal of Composites Science, 8(2), Feb. 2024, Scientific journal - Effect of Interfacial Chemical and Physical Bonding on The Interfacial Shear Strength of Glass Fiber/Polyamide Resin and Mechanical Properties of The Composites
Yusuke ARATANI; Hiroki KOBORI; Kazuto TANAKA
Journal of the Society of Materials Science, Japan, Society of Materials Science, Japan, 72(10) 697 - 704, Oct. 2023, Scientific journal - The Effect of Pulse Current on Electrolytically Plating Nickel as a Catalyst for Grafting Carbon Nanotubes onto Carbon Fibers via the Chemical Vapor Deposition Method
Kazuto Tanaka; Shuhei Kyoyama
Journal of Composites Science, 7(2), Feb. 2023, Scientific journal - Study on Fatigue Life Evaluation of Adhesive Structure Based on Fatigue Characteristics of Adhesive
KAWAGUCHI Masataka; KURAHASHI Munetoshi; TANAKA Kazuto; WATANABE Kimitaka
Journal of the Society of Materials Science, Japan, The Society of Materials Science, Japan, 71(11) 887 - 894, 15 Nov. 2022 - Effects of Surface Treatment for Mg Alloy and Hot-Melt Adhesive Film on Bending Properties of CFRTP and Mg Alloy Multi-Material Hat-Shaped Member
TANAKA Kazuto; UEHIRA Noriki; KASUYA Akira
Journal of the Society of Materials Science, Japan, The Society of Materials Science, Japan, 71(11) 895 - 902, 15 Nov. 2022 - Effect of Silica Addition to Resin on Fiber Matrix Interfacial Shear Strength of Carbon Fiber Reinforced Polyamide Resin at High Temperature
TANAKA Kazuto; MORIOKA Nobuhiko; KAWAGUCHI Masataka; WATANABE Kimitaka
Journal of the Society of Materials Science, Japan, The Society of Materials Science, Japan, 71(6) 501 - 507, 15 Jun. 2022 - Effects of Polypropylene/Polyamide Matrix Hybridization on the Interfacial Bonding Strength of Press and Injection Hybrid Molded Product Using Continuous Glass Fiber Reinforced Plastic Composites
ARATANI Yusuke; FUKUDA Shoi; TANAKA Kazuto
Journal of the Society of Materials Science, Japan, The Society of Materials Science, Japan, 71(5) 432 - 438, 15 May 2022 - Friction Stir Spot Welding for CFRP/Al Using CFRP Laminated Composites with an Outermost Layer of Thermoplastic Resin
TANAKA Kazuto; KAWAKAMI Masashi; NISHIGUCHI Katsuya
Journal of the Society of Materials Science, Japan, The Society of Materials Science, Japan, 71(5) 453 - 460, 15 May 2022 - Effects of Chemical Bonding and Temperature on Interfacial Strength of Glass/Polyamide Resin
ARATANI Yusuke; KENJO Yuta; TANAKA Kazuto
Journal of the Society of Materials Science, Japan, The Society of Materials Science, Japan, 71(5) 424 - 431, 15 May 2022 - 樹脂構造体の疲労強度評価に関する研究
川口 正隆; 野口 剛; 田中 和人; 渡辺 公貴
同志社大学ハリス理化学研究報告 = The Harris science review of Doshisha University, 同志社大学ハリス理化学研究所, 63(1) 35 - 44, 30 Apr. 2022 - Effect of Grafted CNT on Carbon Fibers on Impregnation Properties of Carbon Fiber Reinforced Polyamide 6
TANAKA Kazuto; TAKENAKA Toshiki; KATAYAMA Tsutao; MORITA Yusuke
Journal of the Society of Materials Science, Japan, The Society of Materials Science, Japan, 70(9) 670 - 677, 2021 - Effects of Cooling Speed of Specimen at Preparation, Temperature during Test and Sizing agent on Glass Fiber / Polyamide Resin Interfacial Shear Strength
ARATANI Yusuke; OKUDA Shintaro; TANAKA Kazuto
Journal of the Society of Materials Science, Japan, The Society of Materials Science, Japan, 70(9) 684 - 689, 2021 - Effect of Stacking Sequence on Stiffness of Al / CFRTP Multi-Material Hat Shaped Member and Its Cost Evaluation
TANAKA Kazuto; KITANO Tatsuya; KAWAGUCHI Masataka; WATANABE Kimitaka; KATAYAMA Tsutao
Journal of the Society of Materials Science, Japan, The Society of Materials Science, Japan, 70(10) 773 - 780, 2021 - Effect of Fiber Content of Injection Material on Mechanical Properties of Melted Thermoplastic-Resin Transfer Molded Products
TANAKA Kazuto; ASANO Momoka; KATAYAMA Tsutao; KAWAGUCHI Masataka; WATANABE Kimitaka; TAKEDA Yoshihiro
Journal of the Society of Materials Science, Japan, The Society of Materials Science, Japan, 70(10) 766 - 772, 2021 - Fabrication of PLA Nano/Micro Fiber Laminated Nonwoven Fabric by Electrospinning Method
TANAKA Kazuto; YAMAMURO Nanami; KATAYAMA Tsutao; MORITA Yusuke; TAKEDA Yoshihiro
Journal of the Society of Materials Science, Japan, The Society of Materials Science, Japan, 70(11) 846 - 852, 2021 - Effect of press displacement on impregnation properties in melted thermoplastic-resin transfer molding of continuous fiber reinforced thermoplastic composites
Kazuto Tanaka; Momoka Asano; Tsutao Katayama; Masataka Kawaguchi
WIT Transactions on the Built Environment, 196 69 - 78, 11 Nov. 2020, International conference proceedings - Effect of amount of grafted CNT on carbon fiber on interfacial shear strength between carbon fiber and polyamide resin by microdroplet test
Kazuto Tanaka; Toshiki Takenaka; Tsutao Katayama; Yusuke Morita; Kimitaka Watanabe; Masataka Kawaguchi
WIT Transactions on the Built Environment, 196 51 - 60, 11 Nov. 2020, International conference proceedings - Influence of grooves and position of electrodes on the temperature distribution of a flat mold using high-frequency direct resistance heating
Kazuto Tanaka; Yoshiki Furukawa; Tsutao Katayama; Kimitaka Watanabe; Masataka Kawaguchi; Hideyuki Kuwahara
WIT Transactions on the Built Environment, 196 87 - 95, 11 Nov. 2020, International conference proceedings - Effect of tetrathiafulvalenetetracyanoquinodimethane addition on the mechanical properties of polyamide 6 nanofibers
Kazuto Tanaka; Nanami Yamamuro; Tsutao Katayama
WIT Transactions on the Built Environment, 196 105 - 111, 11 Nov. 2020, International conference proceedings - Evaluation of the mechanical properties of braid-CFRTP produced by pultrusion
Kazuto Tanaka; Tatsuya Kitano; Tsutao Katayama; Masataka Kawaguchi
WIT Transactions on the Built Environment, 196 79 - 86, 11 Nov. 2020, International conference proceedings - Effect of Copolyamide Surface Treatment on Carbon Fiber Influencing the Interfacial Properties of Carbon Fiber and Polyamide 12
Kazuto TANAKA; Kanako YAMADA; Tsutao KATAYAMA
Journal of the Society of Materials Science, Japan, Society of Materials Science, Japan, 69(10) 740 - 745, 15 Oct. 2020, Scientific journal - Effect of Air Oxidation of Carbon Fiber on Interfacial Shear Strength of Carbon Fiber Reinforced Thermoplastics
Kazuto TANAKA; Saya OKUDA; Tsutao KATAYAMA
Journal of the Society of Materials Science, Japan, Society of Materials Science, Japan, 69(5) 358 - 364, 15 May 2020, Scientific journal - Effect of Amorphous Carbon Coating of Carbon Fiber on Mechanical Properties of Carbon Fiber Reinforced PA6
Kazuto TANAKA; Ririko HABE; Tsutao KATAYAMA; Kazuki NAKATSUKA
Journal of the Society of Materials Science, Japan, Society of Materials Science, Japan, 69(5) 365 - 372, 15 May 2020, Scientific journal - Influence of unsizing and carbon nanotube grafting of carbon fibre on fibre matrix interfacial shear strength of carbon fibre and polyamide 6
Kazuto Tanaka; Kanako Yamada; Yoshitake Hinoue; Tsutao Katayama
Key Engineering Materials, 827 KEM 178 - 183, 2020, International conference proceedings - Effect of resin layer thickness on mode ii delamination growth property of CFRTP laminates under static loadings
Kazuto Tanaka; Kosuke Ishida; Keisuke Takemoto; Tsutao Katayama
Key Engineering Materials, 827 KEM 446 - 451, 2020, International conference proceedings - Influence of magnetite dispersion on tensile properties of magnetite/PLA nanofiber nonwoven fabrics
Kazuto Tanaka; Yuta Ishii; Tsutao Katayama
Key Engineering Materials, 827 KEM 190 - 195, 2020, International conference proceedings - Evaluation of self weight deflection property of GFRTP laminate at moulding temperature and formability simulation of diaphragm forming
Kazuto Tanaka; Toshihide Kiyama; Tsutao Katayama
Key Engineering Materials, 827 KEM 493 - 498, 2020, International conference proceedings - Effects of temperature on the fibre matrix interfacial shear strength of carbon nanotube grafted carbon fibre reinforced heat resistant resin
Kazuto Tanaka; Daiki Kugimoto; Tsutao Katayama
Key Engineering Materials, 827 KEM 488 - 492, 2020, International conference proceedings - Effect of air oxidation treatment of cnt on tensile strength of CNT/ polyamide 6 nanofibres and their dispersion
Kazuto Tanaka; Masaki Kamada; Tsutao Katayama
Key Engineering Materials, 827 KEM 184 - 189, 2020, International conference proceedings - Evaluation of mechanical properties of press and injection hybrid molded products using CNT grafted plain woven carbon fiber fabric at rib roots
Kazuto Tanaka; Munetaka Kawabe; Tsutao Katayama
Zairyo/Journal of the Society of Materials Science, Japan, 68(8) 636 - 642, Aug. 2019, Scientific journal - Continuous fiber reinforced thermoplastics molding by melted thermoplastic-resin transfer molding process
Kazuto Tanaka; Akihiro Hirata; Tsutao Katayama
Zairyo/Journal of the Society of Materials Science, Japan, 68(8) 628 - 635, Aug. 2019, Scientific journal - Development of Molding Method of Carbon Fiber Reinforced Thermoplastics by Using Direct Resistance Heating and Induction Heating
TANAKA Kazuto; AKAMATSU Shun; KATAYAMA Tsutao; KUWAHARA Hideyuki
Journal of the Society of Materials Science, Japan, 公益社団法人 日本材料学会, 68(7) 565 - 571, Jul. 2019 - Carbon Fiber Reinforced Thermoplastics Molding by Using Direct Resistance Heating to Carbon Nanofilaments Grafted Carbon Fiber
Kazuto Tanaka; Ririko Habe; Masayoshi Tanaka; Tsutao Katayama
JOURNAL OF COMPOSITES SCIENCE, MDPI, 3(1), Mar. 2019, Scientific journal - Effect of Carbon Nanotube Deposition Time to the Surface of Carbon Fibres on Flexural Strength of Resistance Welded Carbon Fibre Reinforced Thermoplastics Using Carbon Nanotube Grafted Carbon Fibre as Heating Element
Kazuto Tanaka; Takanobu Nishikawa; Kazuhiro Aoto; Tsutao Katayama
JOURNAL OF COMPOSITES SCIENCE, MDPI, 3(1), Mar. 2019, Scientific journal - Effects of Water Absorption on the Fiber-Matrix Interfacial Shear Strength of Carbon Nanotube-Grafted Carbon Fiber Reinforced Polyamide Resin
Kazuto Tanaka; Saya Okuda; Yoshitaka Hinoue; Tsutao Katayama
JOURNAL OF COMPOSITES SCIENCE, MDPI, 3(1), Mar. 2019, Scientific journal - Effect of Rib Root Shape on the Rib Root Tensile Strength of Press and Injection Hybrid Molded Products Made with CF/PA6 Random Prepreg Sheet
田中和人; 嘉悦正臣; 片山傳生; 石川健
材料, 67(12) 1080‐1086 , Dec. 2018, Scientific journal - Evaluation of Mechanical Properties of Carbon Fiber Reinforced Polyamide 12 Laminates with Polyamide 12 Elastomer Layers
田中和人; 大野花甫里; 片山傳生; 長谷朝博
材料, 67(11) 1006‐1012 - 1012, Nov. 2018, Scientific journal - Dissimilar Materials Joining of CFRTP and Aluminum Alloy by Resistance Spot Welding
田中和人; 山城太紀; 片山傳生
材料, 67(11) 1013‐1020 , Nov. 2018, Scientific journal - Effect of electroacupuncture stimulation on long-term recovery following Achilles tendon rupture in a rat model.
Miwa Imaeda; Tatsuya Hojo; Hiroshi Kitakoji; Kazuto Tanaka; Megumi Itoi; Motohiro Inoue
Acupuncture in medicine : journal of the British Medical Acupuncture Society, 36(5) 327 - 332, Oct. 2018, Scientific journal - FEM analysis of temperature distribution of flat mold by direct resistance heating method
Kazuto Tanaka; Jun Nakatsuka; Tsutao Katayama; Hideyuki Kuwahara
Zairyo/Journal of the Society of Materials Science, Japan, Society of Materials Science Japan, 67(3) 367 - 374, 01 Mar. 2018, Scientific journal - Fabrication of hydroxyapatite/PLA composite nanofibers and effects of surface treatment of hydroxyapatite on their mechanical properties and dispersion
Kazuto Tanaka; Takuma Shiga; Tsutao Katayama
Zairyo/Journal of the Society of Materials Science, Japan, Society of Materials Science Japan, 67(2) 291 - 298, 01 Feb. 2018, Scientific journal - Effect of Rib root shape on the tensile strength of press and injection hybrid molded products made with CF/PA6 random prepreg sheet
Kazuto Tanaka; Masaomi Kaetsu; Tsutao Katayama; Takeshi Ishikawa
WIT Transactions on the Built Environment, 175 93 - 100, 2018, International conference proceedings - Evaluation of mechanical properties of glass fiber reinforced polypropylene composites made by press and injection hybrid molding
Kazuto Tanaka; Ryuichi Noguchi; Tsutao Katayama
Zairyo/Journal of the Society of Materials Science, Japan, Society of Materials Science Japan, 67(1) 107 - 113, 01 Jan. 2018, Scientific journal - Evaluation of mechanical property of press and injection hybrid molded cf/pa6 using paper-type intermediate material
Kazuto Tanaka; Takumi Yamada; Tsutao Katayama
Zairyo/Journal of the Society of Materials Science, Japan, Society of Materials Science Japan, 67(1) 114 - 120, 01 Jan. 2018, Scientific journal - Effects of temperature on the fiber matrix interfacial properties of carbon fiber reinforced highly heat resistant polyamide resin
Kazuto Tanaka; Nanako Hosoo; Tsutao Katayama
Zairyo/Journal of the Society of Materials Science, Japan, Society of Materials Science Japan, 66(10) 746 - 751, 01 Oct. 2017, Scientific journal - Effects of press pressure on the mechanical properties of rib root for glass fiber reinforced polypropylene composites, molded by press and injection hybrid molding
Kazuto Tanaka; Kaito Karasuno; Noguchi Ryuichi; Teuta Katayama
WIT Transactions on Engineering Sciences, WITPress, 116 317 - 326, 2017, International conference proceedings - Effects of the molecular weight of polycarbonate on the mechanical properties of carbon fiber reinforced polycarbonate
Kazuto Tanaka; Keisuke Takemoto; Masahiro Suzue; Tsutao Katayama
WIT Transactions on Engineering Sciences, WITPress, 116 327 - 335, 2017, International conference proceedings - Press and injection hybrid molding using cf/pp unidirectional slit prepreg and evaluation of bonding strength at rib root
Kazuto Tanaka; Yudai Harada; Tsutao Katayama; Takeshi Ishikawa; Masao Tomioka
Zairyo/Journal of the Society of Materials Science, Japan, Society of Materials Science Japan, 65(10) 721 - 726, 01 Oct. 2016, Scientific journal - Evaluation of mechanical property of press and injection hybrid molded cf/pa6 using cut prepreg sheets
Kazuto Tanaka; Daichi Tokura; Tsutao Katayama; Takeshi Ishikawa; Masao Tonhoka
Zairyo/Journal of the Society of Materials Science, Japan, Society of Materials Science Japan, 65(10) 713 - 720, 01 Oct. 2016, Scientific journal - Effect of carbon nanotubes deposition form on carbon fiber and polyamide resin interfacial strength
Kazuto Tanaka; Yuki Okumura; Tsutao Katayama; Yusuke Morita
Zairyo/Journal of the Society of Materials Science, Japan, Society of Materials Science Japan, 65(8) 586 - 591, 01 Aug. 2016, Scientific journal - Effect of resin supply form on mechanical properties of continuous carbon fiber reinforced thermoplastics
Kazuto Tanaka; Shunsuke Maehata; Tsutao Katayama
Zairyo/Journal of the Society of Materials Science, Japan, Society of Materials Science Japan, 65(8) 592 - 597, 01 Aug. 2016, Scientific journal - Effect of temperature on the fiber/matrix interfacial strength of carbon fiber reinforced polyamide model composites
Kazuto TANAKA; Nanako HOSOO; Tsutao KATAYAMA; Yuki NOGUCHI; Kazuhiro IZUI
Mechanical Engineering Journal, Vol. 3(No. 6) DOI: 10.1299/mej.16-00158 , 2016, Scientific journal - Effect of humidity on diameter of polyamide 6 nanofiber in electrospinning process
Kazuto TANAKA; Mai TOMIZAWA; Tsutao KATAYAMA
Mechanical Engineering Journal, Vol. 3(No. 6) DOI: 10.1299/mej.16-00289 , 2016, Scientific journal - Influence of holding time and pressure on tensile shear strength of resistance welded CFRTP
Kazuto TANAKA; Kenji OKADA; Tsutao KATAYAMA
WIT Transactions on the Built Environment, (Vol.166) 351 - 359, 2016, International conference proceedings - FEM analysis of temperature distribution of flat type mold for CFRTP thermoforming with direct resistance heating
Kazuto TANAKA; Masayoshi TANAKA; Ryoji SUE; Tsutao KATAYAMA; Hideyuki KUWAHARA
WIT Transactions on the Built Environment, (Vol.166) 381 - 389, 2016, International conference proceedings - Effects of PP modification and processing time on fiber/matrix interfacial strength for carbon fiber reinforced polypropylene
Kazuto TANAKA; Kahori OHNO; Tsutao KATAYAMA
WIT Transactions on the Built Environment, (Vol.166) 329 - 334, 2016, International conference proceedings - Diaphragm Molding Analysis of GFRTP using Finite Element Method
Kazuto TANAKA; Masahiro Ogawa; Tsutao KATAYAMA; Hidetoshi SAKAMOTO
WIT Transactions on the Built Environment, (Vol.166) 297 - 305, 2016, International conference proceedings - Friction Stir Spot Welding of CFRP and Aluminum Alloy with Thermoplastic Adhesive
Kazuto TANAKA; Takuya TERAMURA; Tsutao KATAYAMA; Katsuya NISHIGUCHI
WIT Transactions on the Built Environment, (Vol.166) 391 - 401, 2016, International conference proceedings - Effect of the molding pressure on the mechanical properties of CFRTP using the paper-type intermediate material
Kazuto TANAKA; Takumi. YAMADA; Kohei MORIITO; Tsutao KATAYAMA
WIT Transactions on the Built Environment, (Vol.166) 307 - 315, 2016, International conference proceedings - Effect of mold temperature on interfacial welded strength and outer shell laminate strength of CF / PA6 composites manufactured by press and injection hybrid molding
Kazuto TANAKA; Yusuke KONDO; Tsutao KATAYAMA
WIT Transactions on the Built Environment, (Vol.166) 317 - 327, 2016, International conference proceedings - Effects of Preheating Temperature on the Interfacial Tensile Strength for Glass Fiber Reinforced Polypropylene Composites Made by Press and Injection Hybrid Molding
Kazuto TANAKA; Ryuichi NOGUCHI; Tsutao KATAYAMA
WIT Transactions on the Built Environment, (Vol.166) 287 - 296, 2016, International conference proceedings - Fabrication of Hydroxyapatite/PLA Composite Nanofiber by Electrospinning
Kazuto TANAKA; Takuma SHIGA; Tsutao KATAYAMA
WIT Transactions on the Built Environment, (Vol.166) 371 - 379, 2016, International conference proceedings - Influence of water absorption on fiber/matrix interfacial shear strength of glass fiber reinforced degradation controlled PLA model composite
Kazuto TANAKA; Ayumi INAGAKI; Misato MIYAMURA; Tsutaki KATAYAMA; Seishi YOSHIKAWA; Tsutao KATAYAMA
WIT Transactions on the Built Environment, 166 361 - 369, 2016, Scientific journal - Redesign of ZIGZAG Chair by fiber reinforced plastics - fusing of product design and engineering -
Y.Ohbuchi; H.Iida; T.Katayama; K.Tanaka; Y.Nakamura; H.Sakamoto
WIT Transactions of Modelling and Simulation, 59 25 - 32, May 2015, Scientific journal - FEM analysis of temperature distribution of mold for cfrtp pipe molding heated by direct resistance
Kazuto Tanaka; Yasuharu Matsuura; Tsutao Katayama; Hideyuki Kuwahara
Zairyo/Journal of the Society of Materials Science, Japan, Society of Materials Science Japan, 64(11) 947 - 953, 2015, Scientific journal - Multiobjective optimization using an aggregative gradient-based method
Kazuhiro Izui; Takayuki Yamada; Shinji Nishiwaki; Kazuto Tanaka
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION, SPRINGER, 51(1) 173 - 182, Jan. 2015, Scientific journal - CFRTP pipe molding process using high-frequency direct resistance heating
Kazuto Tanaka; Jun Nakatsuka; Yasuharu Matsuura; Takaaki Ueda; Tsutao Katayama
WIT Transactions on Engineering Sciences, Vol.90 217 - 224, 2015, International conference proceedings - Press and injection hybrid molding of glass fiber reinforced thermoplastics
Kazuto Tanaka; Yohei Fujita; Tsutao Katayama
WIT Transactions on Engineering Sciences, Vol.90 225 - 232, 2015, International conference proceedings - FEM analysis of temperature distribution of CFRTP curved pipe mold heated by high-frequency direct resistance heating
Kazuto Tanaka; Shota Yamada; Yasuharu Matsuura; Tsutao Katayama
WIT Transactions on Engineering Sciences, Vol.90 233 - 242, 2015, International conference proceedings - Influence of annealing process on crystallinity of glass fiber reinforced easily degradable PLA composites
Kazuto Tanaka; Misato Miyamura; Yoko Okamoto; Tsutao Katayama; Tsutaki Katayama; Seishi Yoshikawa
Key Engineering Materials, Trans Tech Publications Ltd, 627 169 - 172, 2015, International conference proceedings - Effect of high temperature on fiber/matrix interfacial properties for carbon fiber/polyphenylenesulfide model composites
Kazuto Tanaka; Jun Nishio; Tsutao Katayama; Shinichi Enoki
Key Engineering Materials, Trans Tech Publications Ltd, 627 173 - 176, 2015, International conference proceedings - Effect of hot water environment on tensile fracture properties of carbon fiber reinforced polyoxamide composites
Kazuto Tanaka; Shunsuke Maehata; Tsutao Katayama; Masahiro Shinohara
Key Engineering Materials, Trans Tech Publications Ltd, 627 177 - 180, 2015, International conference proceedings - Roll forming of CFRTP prepreg and evaluation of its mechanical property
Tanaka Kazuto; Sukena Ryuma; Mizuno Syota; Katayama Tsutao
The science and engineering review of Doshisha University, Doshisha University, 55(3) 263 - 270, Oct. 2014 - Effect of acid pretreatment of the plated substrate on the hardness of the carbon plating film formed by using a molten salt electrochemical process
K. Tanaka; Y. Okumura; H. Kurooka; T. Katayama; A. Yukawa; Y. Ueda
WIT Transactions on the Built Environment, WITPress, 137 521 - 530, 2014, International conference proceedings - Development of the fabrication process of carbon nanotube reinforced polylactide (PLA) nanofiber and evaluation of its mechanical properties
K. Tanaka; M. Hashimoto; M. Nagura; T. Katayama
WIT Transactions on the Built Environment, WITPress, 137 245 - 254, 2014, International conference proceedings - Effect of the molecular weight of polycarbonateon the impact resistance of continuous carbonfiber reinforced polycarbonate composites
K. Tanaka; H. Koriyama; S. Isshiki; T. Katayama; M. Shinohara
WIT Transactions on the Built Environment, WITPress, 137 283 - 290, 2014, International conference proceedings - Evaluation of the interfacial and interlaminar shear strength of carbon fiber reinforced polycarbonate made by a unidirectional sheet
K. Tanaka; M. Suzue; S. Isshiki; M. Shinohara; T. Katayama
WIT Transactions on the Built Environment, WITPress, 137 291 - 299, 2014, International conference proceedings - Formability evaluation of carbon fiber NCF by a non-contact 3D strain measurement system and the effects of blank folder force on its formability
K. Tanaka; R. Ushiyama; T. Katayama; S. Enoki; H. Sakamoto
WIT Transactions on the Built Environment, WITPress, 137 317 - 326, 2014, International conference proceedings - Mechanical properties of injection-molded carbon fiber/polypropylene composites hybridized with nanofillers
Y. Arao; S. Yumitori; H. Suzuki; T. Tanaka; K. Tanaka; T. Katayama
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, ELSEVIER SCI LTD, 55 19 - 26, Dec. 2013, Scientific journal - Explanatory analysis of the manner in which an instructor adaptively organizes skilled motion teaching process
Hajime Mizuyama; Kayo Yamada; Kazuto Tanaka; Atsuto Maki
International Journal of Industrial Ergonomics, 43(5) 430 - 438, Sep. 2013, Scientific journal - Effect of Water Absorption on the Mechanical Properties of Carbon Fiber/Polyamide Composites
Kazuto TANAKA; Shota MIZUNO; Hirokazu HONDA; Tsutao KATAYAMA; Shinichi ENOKI
Journal of Solid Mechanics and Materials Engineering, Japan Society of Mechanical Engineers, 7(5) 520 - 529, 2013 - Formability evaluation of Non-Crimp Carbon Fabric by non-contact 3D deformation measurement system
Kazuto Tanaka; Kazuya Kanazawa; Shinichi Enoki; Tsutao Katayama
ADVANCES IN FRACTURE AND DAMAGE MECHANICS XI, TRANS TECH PUBLICATIONS LTD, 525-526 493 - +, 2013, International conference proceedings - Evaluation on mechanical properties of a single trabecular in bovine femur
S. Enoki; M. Higashiura; M. Sato; K. Tanaka; T. Katayama
WIT Transactions on the Built Environment, Vol.124 65 - 73, Sep. 2012, International conference proceedings - Mechanical properties of a single cancellous bone trabeculae taken from bovine femur
Shinichi Enoki; Mitsuhiro Sato; Kazuto Tanaka; Tsutao Katayama
International Journal of Modern Physics: Conference Series (IJMPCS), Vol.6 349 - 354, 2012, International conference proceedings - Development of rapid pipe moulding process for Carbon Fiber Reinforced Thermoplastics by direct resistance heating
Kazuto Tanaka; Ryuki Harada; Toshiki Uemura; Tsutao Katayama; Hideyuki Kuwahara
International Journal of Modern Physics: Conference Series (IJMPCS), Vol.6 616 - 621, 2012, International conference proceedings - Vacuum assisted high speed compression molding and evaluation of mechanical properties of continuous carbon fiber reinforced polycarbonate composite
Kazuto Tanaka; Hitoshi Kashihara; Tsutao Katayama
Zairyo/Journal of the Society of Materials Science, Japan, 60(3) 251 - 258, Mar. 2011, Scientific journal - The Effects of Trabecular Bone Microstructure on Compression Property of Bovine Cancellous Bone
Kazuto Tanaka; Yusuke Tanimoto; Yusuke Kita; Shinichi Enoki; Tsutao Katayama
ADVANCES IN FRACTURE AND DAMAGE MECHANICS IX, TRANS TECH PUBLICATIONS LTD, 452-453 297 - +, 2011, International conference proceedings - Effects of Stitching Parameters of Non-Crimp Fabrics on the Mechanical Properties of CFRTP
Kazuto Tanaka; Masahiro Yamada; Masahiro Shinohara; Tsutao Katayama
ADVANCES IN FRACTURE AND DAMAGE MECHANICS IX, TRANS TECH PUBLICATIONS LTD, 452-453 301 - +, 2011, International conference proceedings - INJECTION MOLDING OF FLAT GLASS FIBER REINFORCED THERMOPLASTICS
Kazuto Tanaka; Tsutao Katayama; Tatsuya Tanaka; Akihiro Anguri
INTERNATIONAL JOURNAL OF MODERN PHYSICS B, WORLD SCIENTIFIC PUBL CO PTE LTD, 24(15-16) 2555 - 2560, Jun. 2010 - S1601-1-2 Development of An Accurate Automatic 3D Blood Vessel Searching System Using NIR Light
MIZUNO Yoshifumi; KATAYAMA Tsutao; TANAKA Kazuto; NAKAMACHI Eiji
The proceedings of the JSME annual meeting, The Japan Society of Mechanical Engineers, 2010 95 - 96, 2010 - Development of a New Biocompatible MgSiO3 Piezoelectric Thin Film
HWANG Hwisim; UETSUJI Yasutomo; TANAKA Kazuto; KATAYAMA Tsutao; NAKAMACHI Eiji
JSMME, The Japan Society of Mechanical Engineers, 4(11) 1636 - 1643, 2010 - Tensile properties of amniotic membrane
K. Tanaka; T. Nagayama; T. Katayama; N. Koizumi
HIGH PERFORMANCE STRUCTURES AND MATERIALS V, WIT PRESS, 112 197 - 206, 2010, International conference proceedings - Impact property of jute fabric reinforced PLA composites
K. Tanaka; H. Miyabe; T. Katsura; T. Katayama; K. Uno
HIGH PERFORMANCE STRUCTURES AND MATERIALS V, WIT PRESS, 112 207 - +, 2010, International conference proceedings - Rapid pipe moulding process of Carbon Fibre Reinforced Thermoplastics by high-frequency direct resistance heating
K. Tanaka; R. Harada; T. Uemura; T. Katayama; H. Kuwahara
HIGH PERFORMANCE STRUCTURES AND MATERIALS V, WIT PRESS, 112 133 - +, 2010, International conference proceedings - Effect of water absorption on the mechanical properties of continuous carbon fibre reinforced polycarbonate composites
K. Tanaka; Y. Fukushima; K. Kashihara; T. Katayama
HIGH PERFORMANCE STRUCTURES AND MATERIALS V, WIT PRESS, 112 153 - +, 2010, International conference proceedings - High-speed compression moulding of CFRTP/AFRTP hybrid composites using an electromagnetic induction heating system
K. Tanaka; M. Yamada; N. Kohashi; T. Katayama
HIGH PERFORMANCE STRUCTURES AND MATERIALS V, WIT PRESS, 112 141 - +, 2010, International conference proceedings - Effect of Vitamin-E Addition on Fatigue Crack Growth Property of Ultra High Molecular Weight Polyethylene
Kazuto Tanaka; Masatoshi Uchiyama
ADVANCES IN FRACTURE AND DAMAGE MECHANICS VIII, TRANS TECH PUBLICATIONS LTD, 417-418(417+418) 93 - +, 2010, International conference proceedings - Compression molding of carbon fiber reinforced thermoplastics using non-woven stitched multi-axial cloth by means of induction heating system
Kazuto Tanaka; Norio Kohashi; Yohei Kinoshua; Tsutao Katayama; Kazutaka Uno
Zairyo/Journal of the Society of Materials Science, Japan, 58(7) 642 - 648, Jul. 2009, Scientific journal - J0401-4-4 Effect of Electric Field Stimulation on Chondrocyte Activity
NAKASUJI Shota; MORITA Yusuke; TANAKA Kazuto; KATAYAMA Tsutao; NAKAMACHI Eiji
The proceedings of the JSME annual meeting, The Japan Society of Mechanical Engineers, 2009 293 - 294, 2009 - J0401-4-5 Evaluation of mechanical function of articular cartilage using electric impedance method
OKUMURA Nobukazu; MORITA Yusuke; TANAKA Kazuto; KATAYAMA Tsutao; NAKAMACHI Eiji
The proceedings of the JSME annual meeting, The Japan Society of Mechanical Engineers, 2009 295 - 296, 2009 - S0201-3-1 Effect of BaTiO_3 Thin Film Coating on Bone Marrow Cell
TATEYAMA Yuki; MORITA Yusuke; FURUYA Keiju; TANAKA Kazuto; KATAYAMA Tsutao; NAKAMACHI Eiji
The proceedings of the JSME annual meeting, The Japan Society of Mechanical Engineers, 2009 25 - 26, 2009 - 量産自動車向け繊維強化熱可塑性樹脂基複合材料のコスト評価
田中和人; 植村俊基; 片山傳生
同志社大学理工学研究報告, 50(4) 13 - 19, 2009 - Asymmetric Rolling Process Design Using Crystal Plasticity Multiscale Analysis
倉前宏行; 高橋聖治; 仲町英治; NGUYEN NGOCTam; 田中和人; 片山傳生; 森本秀夫
塑性と加工, 50(578) 242 - 248, 2009, Scientific journal - Influence of environmental degradation and Vitamin-E (α-tocopherol) addition on the fatigue crack growth property of ultra high molecular weight polyethylene
Kazuto Tanaka; Akimasa Kamimura; Tsutao Katayama; Sadamu Kinoshita; Hideyuki Sakoda; Koichi Kuramoto
Zairyo/Journal of the Society of Materials Science, Japan, 57(9) 875 - 881, Sep. 2008, Scientific journal - 1437 Molding of CFRTP/AFRTP Hybrid Composites Using High-speed Processing System
KOHASHI Norio; TANAKA Kazuto; UEMURA Toshiki; KATSURA Takafumi; KATAYAMA Tsutao; UNO Kazutaka
The proceedings of the JSME annual meeting, The Japan Society of Mechanical Engineers, 2008 281 - 282, 2008 - Development of solid-air composites for load dispersion by biomimetic design - Load dispersion ability under dynamic loading condition -
Kazuto Tanaka; Koji Kamada; Tsutao Katayama
Key Engineering Materials, 334-335 I 417 - 420, 21 Feb. 2007 - Evaluation of the Fiber Stress Distribution in Aramid/Epoxy Model Composite Using Micro-Raman Spectroscopy and FEM Analysis
TANAKA Kazuto; MINOSHIMA Kohji; YAMADA Hideo
JSMME, The Japan Society of Mechanical Engineers, 1(3) 364 - 375, 2007 - 2820 Effect of Environment on Mechanical Properties of Stereocomplex-type Polylactic Acid Fiber
KAWASAKI Tomohiro; TANAKA Kazuto; KATAYAMA Tsutao; HYON Suong-Hyu
The proceedings of the JSME annual meeting, The Japan Society of Mechanical Engineers, 2007 299 - 300, 2007 - Nanoscratch evaluation of adhesive strength of Cu/PI films
K. Tanaka; K. Gunji; T. Katayama
COMPUTER METHODS AND EXPERIMENTAL MEASUREMENTS FOR SURFACE EFFECTS AND CONTACT MECHANICS VIII, WIT PRESS/COMPUTATIONAL MECHANICS PUBLICATIONS, 55 303 - +, 2007, International conference proceedings - Development of solid-air composites for load dispersion by biomimetic design
Kazuto Tanaka; Koji Kamada; Tsutao Katayama
ADVANCES IN COMPOSITE MATERIALS AND STRUCTURES, PTS 1 AND 2, TRANS TECH PUBLICATIONS LTD, 334-335 417 - +, 2007, International conference proceedings - Young's modulus of polysilicon thin film evaluated by finite element analysis
Kazuto Tanaka; Kohji Minoshima; Takehiro Imoto
PROGRESSES IN FRACTURE AND STRENGTH OF MATERIALS AND STRUCTURES, 1-4, TRANS TECH PUBLICATIONS LTD, 353-358(353+358) 2227 - +, 2007, International conference proceedings - 3316 Development of solid-air composites by biomimetics superior in load dispersion ability under dynamic loading condition
Tanaka Kazuto; Kamada Koji; Katayama Tsutao
The proceedings of the JSME annual meeting, The Japan Society of Mechanical Engineers, 2006 461 - 462, 2006 - 3311 Influence of environmental degradation and Vitamin-E (a-Tocopherol) addition on the mechanical property of ultra high molecular weight polyethylene
TANAKA Kazuto; UCHIYAMA Masatoshi
The proceedings of the JSME annual meeting, The Japan Society of Mechanical Engineers, 2006 451 - 452, 2006 - Compression moulding of jute fabric reinforced thermoplastic composites based on PLA non-woven fabric
T. Katayama; K. Tanaka; T. Murakami; K. Uno
HIGH PERFORMANCE STRUCTURES AND MATERIALS III, WIT PRESS/COMPUTATIONAL MECHANICS PUBLICATIONS, 85 159 - +, 2006, International conference proceedings - Measurement of the fiber stress distribution during pull-out test by means of micro-Raman spectroscopy and FEM analysis
K. Tanaka; K. Minoshima; H. Yamada
HIGH PERFORMANCE STRUCTURES AND MATERIALS III, WIT PRESS/COMPUTATIONAL MECHANICS PUBLICATIONS, 85 131 - +, 2006, International conference proceedings - Evaluation of the Fiber Stress Distribution in Aramid/Epoxy Model Composite Using Micro-Raman Spectroscopy and FEM Analysis
Kazuto Tanaka; Kohji Minoshima; Hideo Yamada
Transactions of the Japan Society of Mechanical Engineers, Part A,, The Japan Society of Mechanical Engineers, 71(712) 1639 - 1645, Dec. 2005, Scientific journal - 204 Influence of Hydrogen on the Nanoscopic Deformation Behavior in a High-Strength Low-Alloy Steel
MINOSHIMA Kohji; TANAKA Kazuto; ISHIGAKI Yusuke
Proceedings of the 1992 Annual Meeting of JSME/MMD, The Japan Society of Mechanical Engineers, 2005 93 - 94, 2005 - 216 Young's Modulus Measurement of Thin Micro Element and Fine Element Analysis under Bending
TANAKA Kazuto; MINOSHIMA Kohji; IMOTO Takehiro; OGINO Yohei; SHIMA Susumu
Proceedings of the 1992 Annual Meeting of JSME/MMD, The Japan Society of Mechanical Engineers, 2005 117 - 118, 2005 - 1845 Elastic Modulus and Fracture Strength of Poly-Si Thin Film under Bending
MINOSHIMA Kohji; TANAKA Kazuto; OGINO Yohei
The proceedings of the JSME annual meeting, The Japan Society of Mechanical Engineers, 2005 267 - 268, 2005 - Influences of stress waveform and wet environment on fatigue fracture behavior of aramid single fiber
K Tanaka; K Minoshima; T Oya; K Komai
COMPOSITES SCIENCE AND TECHNOLOGY, ELSEVIER SCI LTD, 64(10-11) 1531 - 1537, Aug. 2004, Scientific journal - Influence of Water Absorption on Impact Fracture Behavior and Residual Strength after Impact of CFRP/Aramid Honeycomb Core Sandwich Panels,
Kazuto Tanaka; Kohji Minoshima; Daisuke Goshima; Kenjiro Komai
Transactions of the Japan Society of Mechanical Engineers, Part A,, The Japan Society of Mechanical Engineers, 70(690) 250 - 257, Feb. 2004, Scientific journal - Influence of wet environment and artificial micro defect on environmental strength of silica glass optical fiber
MINOSHIMA Kohji; TANAKA Kazuto; ISHIDA Shinji
The proceedings of the JSME annual meeting, The Japan Society of Mechanical Engineers, 2004 251 - 252, 2004 - Evaluation of mechanical properties of polysilicon microelements by bending test
MINOSHIMA Kohji; TANAKA Kazuto; OGINO Yohei
Proceedings of the 1992 Annual Meeting of JSME/MMD, The Japan Society of Mechanical Engineers, 2004 349 - 350, 2004 - Evaluation of the stress distribution in aramid fiber during pull-out test using Raman micro spectroscopy and FEM analysis
TANAKA Kazuto; MINOSHIMA Kohji; YAMADA Hideo
Proceedings of the 1992 Annual Meeting of JSME/MMD, The Japan Society of Mechanical Engineers, 2004 371 - 372, 2004 - Influence of Wet Environment on the Fracture Behavior of Aramid Single Fiber and Aramid/Epoxy Interface
TANAKA Kazuto
Proceedings of the 1992 Annual Meeting of JSME/MMD, The Japan Society of Mechanical Engineers, 2003 763 - 766, 2003 - Evaluation of the Interfacial Properties in an Aramid Fiber/Epoxy Model Composite using Micro-Raman Spectroscopy
TANAKA Kazuto; MINOSHIMA Kohji; KAWANO Kumiko; KOMAI Kenjiro
Proceedings of the 1992 Annual Meeting of JSME/MMD, The Japan Society of Mechanical Engineers, 2003 99 - 100, 2003 - Evaluation of Mechanical Properties of Poly-silicon Microelements
MINOSHIMA Kohji; TANAKA Kazuto; YOKOTE Hiroki; TOMOIDA Ryo; KOMAI Kenjiro
Proceedings of the 1992 Annual Meeting of JSME/MMD, The Japan Society of Mechanical Engineers, 2003 445 - 446, 2003 - Characterization of the Propagation of Aramid/epoxy Interfacial Debonding under Fatigue Loading
MINOSHIMA Kohji; TANAKA Kazuto; ARAKI Yuji; KOMAI Kenjiro
The proceedings of the JSME annual meeting, The Japan Society of Mechanical Engineers, 2003 363 - 364, 2003 - Influence of wet environment on tensile and fatigue fracture behavior of silica glass fiber
MINOSHIMA Kohji; TANAKA Kazuto; ISHIDA Shinji; KOMAI Kenjiro
Proceedings of the 1992 Annual Meeting of JSME/MMD, The Japan Society of Mechanical Engineers, 2002 165 - 166, 2002 - Characterization of the aramid/epoxy interfacial properties by means of pull-out test and influence of water absorption
K Tanaka; K Minoshima; W Grela; K Komai
COMPOSITES SCIENCE AND TECHNOLOGY, ELSEVIER SCI LTD, 62(16) 2169 - 2177, 2002, Scientific journal - Effects of Stress Waveform and Water Absorption on Fatigue Fracture Behavior of CF/PEEK Composite,
Kazuto Tanaka; Kenjiro Komai; Kohji Minoshima; Hiroshi Hosen
Transactions of the Japan Society of Mechanical Engineers, Part A,, The Japan Society of Mechanical Engineers, 67(655) 574 - 579, Dec. 2001, Scientific journal - 301 Effects of wet environment on fatigue fracture behavior of Al_2O_3 single fiber
KOMAI Kenjiro; MINOSHIMA Kohji; TANAKA Kazuto; FUJINAMI Tatsuya
Proceedings of the 1992 Annual Meeting of JSME/MMD, The Japan Society of Mechanical Engineers, 2001 229 - 230, 2001 - K-0927 Influence of water absorption on the aramid/epoxy interfacial properties and analysis of AE waveform
MINOSHIMA Kohji; TANAKA Kazuto; GRELA Witold; ARAKI Yuji; KOMAI Kenjiro
The proceedings of the JSME annual meeting, The Japan Society of Mechanical Engineers, 1 87 - 88, 2001 - Effects of Stress Waveform and Water Absorption on Fatigue Fracture Behavior of Aramid/Epoxy Composites
KOMAI Kenjiro; MINOSHIMA Kohji; TANAKA Kazuto; TOKURA Tomomi
Proceedings of the 1992 Annual Meeting of JSME/MMD, The Japan Society of Mechanical Engineers, 2000 97 - 98, 2000 - Impact and Compression after Impact Fracture Behavior of CFRP/Aramid Honeycomb Core Sandwich Panel
MINOSHIMA Kohji; TANAKA Kazuto; GOSHIMA Daisuke; KOMAI Kenjiro
The proceedings of the JSME annual meeting, The Japan Society of Mechanical Engineers, 2000 569 - 570, 2000 - Effects of stress waveform and water absorption on fatigue strength of CF/PEEK
K Komai; K Minoshima; K Tanaka; H Hosen
PROGRESS IN MECHANICAL BEHAVIOUR OF MATERIALS (ICM8), VOL 3, UNIV VICTORIA, DEPT MECH ENGN, 922 - 927, 1999, International conference proceedings - Influence of cell shape variations on elastic stiffness of closed cell cellular solids
JL Grenestedt; K Tanaka
SCRIPTA MATERIALIA, PERGAMON-ELSEVIER SCIENCE LTD, 40(1) 71 - 77, Dec. 1998, Scientific journal - Influence of Electron Radiation on Tensile and Impact Fracture Mechanism of Carbon/PEEK Composite,
Kenjiro Komai; Kohji Minoshima; Kazuto Tanaka
Transactions of the Japan Society of Mechanical Engineers, Part A,, The Japan Society of Mechanical Engineers, 64(625) 2300 - 2307, Jan. 1998, Scientific journal - Delamination Induced by Low-Velocity Impact and Influence of Water Absorption on Delamination and CAI of FRPs,
Kenjiro Komai; Kohji Minoshima; Kazuto Tanaka
Transactions of the Japan Society of Mechanical Engineers, Part A,, The Japan Society of Mechanical Engineers, 63(610) 1198 - 1204, Jan. 1997, Scientific journal
MISC
- EVALUATION OF FIBER MATRIX INTERFACIAL STRENGTH FOR CNT GRAFTED CF/PA6 AT HIGH TEMPERATURE
Kazuto Tanaka; Genta Maeda; Yusuke Morita; Tsutao Katayama
20th International Conference on Composite Materials, Copenhagen, July 2015, P105-09 , 2015, Summary international conference - Development of the fabrication process of carbon nanotube reinforced polylactide (PLA) nanofiber and evaluation of its mechanical properties
K. Tanaka; M. Hashimoto; M. Nagura; T. Katayama
WIT Transactions on the Built Environment, WITPress, 137 245 - 254, 2014, Summary international conference - Effect of in-plane tension to blank on formability of carbon fiber non-crimp fabric
Kazuto TANAKA; Yuta TANAKA; Tsutao KATAYAMA
Recent Advances in Structural Integrity Analysis: Proceedings of the International Congress, (Vol.1) 326 - 330, 2014, Summary international conference - Effect of stitch tension of non-crimp fabric on the mechanical properties of CFRTP
Kazuto TANAKA; Daichi TOKURA; Tsutao KATAYAMA
Recent Advances in Structural Integrity Analysis: Proceedings of the International Congress, (Vol.1) 331 - 335, 2014, Summary international conference - Evaluation of mechanical properties of porcine sclera
Kazuto TANAKA; Keisuke YAMAMOTO; Tsutao KATAYAMA
Recent Advances in Structural Integrity Analysis: Proceedings of the International Congress, (Vol.1) 311 - 315, 2014, Summary international conference - B109 Strain Measurement of Porcine Cornea in Tensile Test
SEIGO Munehisa; TANAKA Kazuto; KATAYAMA Tsutao
Proceedings of the ... JSME Conference on Frontiers in Bioengineering, The Japan Society of Mechanical Engineers, 2013(24) 33 - 34, 31 Oct. 2013 - 506 A cost assessment for fabricating ankle foot orthotics made of fiber reinforced thermoplastic
Huang Chaojung; TANAKA Kazuto; KATAYAMA Tsutao
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2013(88) "5 - 6", 16 Mar. 2013 - 505 Effects of Manufacturing Condition on Resin Impregnating of CFRTP UD Tape
IWAMURO Kyosuke; KATAYAMA Tsutao; TANAKA Kazuto; Enoki Shinichi
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2013(88) "5 - 5", 16 Mar. 2013 - DEVELOPMENT OF MOLDING PROCESS FOR CFRTP BY USING DIRECT RESISTANCE HEATING
Keiya IWAMOTO; Kazuto TANAKA; Ryuki HARADA; Tsutao KATAYAMA
COMPOSITES WEEK, Design with/of composites, 2013, Summary international conference - Formability evaluation of Non-Crimp Carbon Fabric by non-contact 3D deformation measurement system
Kazuto Tanaka; Kazuya Kanazawa; Shinichi Enoki; Tsutao Katayama
ADVANCES IN FRACTURE AND DAMAGE MECHANICS XI, TRANS TECH PUBLICATIONS LTD, 525-526 493 - +, 2013 - 416 Mechanical Property of Trabecular Bone in Bovine Femur by the Indentation Test
SATO Mitsuhiro; TANAKA Kazuto; KATAYAMA Tsutao; ENOKI Shinichi
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2012(87) "4 - 16", 16 Mar. 2012 - 227 Evaluation of Mechanical Properties of Porcine Cornea
SEIGO Munehisa; TANAKA Kazuto; KATAYAMA Tsutao; KURASHIKI Ken
学術講演会講演論文集, 日本材料学会, 61 268 - 269, 2012 - Hybrid effects on mechanical properties of injection molded nano-hybrid composites
Y. Arao; H. Suzuki; S. Yumitori; T. Tanaka; K. Tanaka; T. Katayama
ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials, Jan. 2012, Summary international conference - Formability evaluation of non-crimp carbon fabrics
K. Tanaka; K. Kanazawa; S. Enoki; T. Katayama; K. Kurashiki
ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials, (ECCM15 MPROGRA) P3.60 , Jan. 2012, Summary international conference - Influence of Crystallinity Degree on Mechanical Property of Jute Fabric Reinforced PLA Composites
Shinichi ENOKI; Yoko OKAMOTO; Hiroshi MIYABE; Kazuto TANAKA
The Seventh International Workshop on Green Composite, 7 42 - 45, 2012, Summary international conference - 410 Effect of surface charge on rat Done marrow cell differentiation
FURUYA. Keiju; MORITA Yusuke; TANAKA Kazuto; KATAYAMA Tsutao; NAKAMACHI Eji
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2011(86) "4 - 10", 19 Mar. 2011 - 8E-09 Effects of Trabecular Bone Microstructure Parameters on Compression Property of Bovine Cancellous Bone
TANIMOTO Yusuke; ENOKI Shinichi; TANAKA Kazuto; KATAYAMA Tsutao
バイオエンジニアリング講演会講演論文集, The Japan Society of Mechanical Engineers, 2010(23) 91 - 92, 07 Jan. 2011 - 8C-14 Acceleration of bone differentiation by surface charge of bone replacement graft
FURUYA Keiju; MORITA Yusuke; TANAKA Kazuto; KATAYAMA Tsutao; NAKAMACHI Eiji
バイオエンジニアリング講演会講演論文集, The Japan Society of Mechanical Engineers, 2010(23) 221 - 222, 07 Jan. 2011 - 8G-14 Non contact strain measurement of Amniotic membrane during tensile test
NAGAYAMA Takashi; TANAKA Kazuto; KATAYAMA Tsutao; KOIZUMI Noriko
The Proceedings of the Bioengineering Conference Annual Meeting of BED/JSME, 一般社団法人 日本機械学会, 2010(0) 263 - 264, 2011 - Effects of Stitching Parameters of Non-Crimp Fabrics on the Mechanical Properties of CFRTP
Kazuto Tanaka; Masahiro Yamada; Masahiro Shinohara; Tsutao Katayama
ADVANCES IN FRACTURE AND DAMAGE MECHANICS IX, TRANS TECH PUBLICATIONS LTD, 452-453(452+453) 301 - +, 2011 - The Effects of Trabecular Bone Microstructure on Compression Property of Bovine Cancellous Bone
Kazuto Tanaka; Yusuke Tanimoto; Yusuke Kita; Shinichi Enoki; Tsutao Katayama
ADVANCES IN FRACTURE AND DAMAGE MECHANICS IX, TRANS TECH PUBLICATIONS LTD, 452-453(452+453) 297 - +, 2011 - Acceleration of osteogenesis by using barium titanate piezoelectric ceramic as an implant material
K. Furuya; Y. Morita; K. Tanaka; T. Katayama; E. Nakamachi
BIOINSPIRATION, BIOMIMETICS, AND BIOREPLICATION, SPIE-INT SOC OPTICAL ENGINEERING, 7975, 2011, Summary international conference - Analysis and modeling of tacit strategy for teaching a skilled motion taking lacrosse swing as an example
Hajime Mizuyama; Kayo Yamada; Kazuto Tanaka
Proceedings of APMS 2010 - International Conference on Advances in Production Management Systems, USBstick-121, Dec. 2010, Summary international conference - Effect of electroacupuncture on the healing process of tibia fracture in a rat model: a randomised controlled trial
Miwa Nakajima; Motohiro Inoue; Tatsuya Hojo; Nozomu Inoue; Kazuto Tanaka; Ryota Takatori; Megumi Itoi
ACUPUNCTURE IN MEDICINE, B M J PUBLISHING GROUP, 28(3) 140 - 143, Sep. 2010 - 717 Development of an Accurate 3D Blood Vessel Searching System Using NIR Light
MIZUNO Yoshifumi; KATAYAMA Tsutao; TANAKA Kazuto; NAKAMACHI Eiji
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2010(85) "7 - 17", 16 Mar. 2010 - 0309 The Effect of Proteglycan of Articular Cartilage Surface on Lubrication
TOKUYAMA Takaki; MORITA Yusuke; TANAKA Kazuto; KATAYAMA Tsutao; NAKAMACHI Eiji
バイオエンジニアリング講演会講演論文集, The Japan Society of Mechanical Engineers, 2009(22) 39 - 39, 08 Jan. 2010 - 0311 Evaluation of stress relaxation property of articular cartilage using electric impedance method
OKUMURA Nobukazu; MORITA Yusuke; TANAKA Kazuto; KATAYAMA Tsutao; NAKAMACHI Eiji
バイオエンジニアリング講演会講演論文集, The Japan Society of Mechanical Engineers, 2009(22) 41 - 41, 08 Jan. 2010 - 0310 Effect of Pulse Electric Field Stimulation on Mechanical Properties of Cultured Cartilage
NAKASUJI Shota; MORITA Yusuke; TANAKA Kazuto; KATAYAMA Tsutao; NAKAMACHI Eiji
バイオエンジニアリング講演会講演論文集, The Japan Society of Mechanical Engineers, 2009(22) 40 - 40, 08 Jan. 2010 - Pipe forming process for continuous carbon fiber reinforced thermoplastics using high-frequency electric resistance heating
田中 和人; 植村 俊基; 片山 傳生
The Science and engineering review of Doshisha University, 同志社大学理工学研究所, 50(4) 146 - 150, Jan. 2010 - 101 Evaluation of Micro-Structural Parameters of Bovine Cancellous Bone by X-ray μCT
TANIMOTO Yusuke; ENOKI Shinichi; NAKAMACHI Eiji; TANAKA Kazuto; KATAYAMA Tsutao
学術講演会講演論文集, 日本材料学会, 59 1 - 2, 2010 - 102 Evaluation of Mechanical Properties of Amniotic Membrane for Culture Substrate of Cell
NAGAYAMA Takashi; TANAKA Kazuto; KATAYAMA Tsutao; KOIZUMI Noriko
学術講演会講演論文集, 日本材料学会, 59 3 - 4, 2010 - Mechanical Properties of a Single Trabecula in Bovine Femur by the Three Point Bending Test
Kazuto Tanaka; Yusuke Kita; Tsutao Katayama; Mami Matsukawa
THIRD INTERNATIONAL CONFERENCE ON THE DEVELOPMENT OF BIOMEDICAL ENGINEERING IN VIETNAM, SPRINGER, 27 235 - 238, 2010, Summary international conference - Mechanical property of glass continuous fiber reinforced thermoplastics
Kazuto Tanaka; Noriyuki Endo; Toshiki Uemura; Tsutao Katayama; Kazutaka Uno
7th Asian-Australasian Conference on Composite Materials 2010, ACCM 2010, 1 505 - 508, 01 Jan. 2010 - Effect of water absorption on the fatigue fracture properties of carbon / polyamide composites
Kazuto Tanaka; Hirokazu Honda; Tsutao Katayama; Ken Kurashiki
7th Asian-Australasian Conference on Composite Materials 2010, ACCM 2010, 1 498 - 501, Jan. 2010, Summary international conference - A semiotic characterization of the process of teaching and learning a skilled motion taking wok handling as an example
Hajime Mizuyama; Kayo Yamada; Atsuto Maki; Kazuto Tanaka
IFAC Proceedings Volumes (IFAC-PapersOnline), USB-31, 01 Jan. 2010 - Development of an electrospinning method for the tensile testing of single nanofibers
K. Tanaka; Y. Minamiguchi; Y. Miyoshi; T. Katayama; S. -H. Hyon
HIGH PERFORMANCE STRUCTURES AND MATERIALS V, WIT PRESS, 112 177 - +, 2010 - High speed moulding of Carbon Fiber Reinforced plastic based on non-woven stitched multi-axial cloth using induction heating system
Kazuto Tanaka; Tsutao Katayama; Kazutaka Uno
17th International Conference on Composite Materials(ICCM-17), (C1) 10 , Dec. 2009, Summary international conference - A206 Relation between electric impedance and mechanical property for the enzyme-treated articular cartilage
OKUMURA Nobukazu; MORITA Yusuke; TANAKA Kazuto; KATAYAMA Tsutao; NAKAMACHI Eiji
Proceedings of the ... JSME Conference on Frontiers in Bioengineering, The Japan Society of Mechanical Engineers, 2009(20) 65 - 66, 06 Nov. 2009 - B107 Development of an Accurate 3D Blood Vessel Searching System Using NIR Light
KATAYAMA Tsutao; TANAKA Kazuto; NAKAMACHI Eiji; MIZUNO Yoshifumi
Proceedings of the ... JSME Conference on Frontiers in Bioengineering, The Japan Society of Mechanical Engineers, 2009(20) 41 - 42, 06 Nov. 2009 - B105 Effect of Electric Field Stimulation on Activity of Cultured Cartilage
NAKASUJI Shota; MORITA Yusuke; TANAKA Kazuto; KATAYAMA Tsutao; NAKAMACHI Eiji
Proceedings of the ... JSME Conference on Frontiers in Bioengineering, The Japan Society of Mechanical Engineers, 2009(20) 37 - 38, 06 Nov. 2009 - 711 Lubrication Properties of Surface Layer on Articular Cartilage
TOKUYAMA Takaki; MORITA Yusuke; TANAKA Kazuto; KATAYAMA Tsutao; NAKAMACHI Eiji
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2009(84) "7 - 16", 16 Mar. 2009 - 710 Effect of Pulse Electric Field Stimulation on Activity of Chondrocyte
NAKASUJI Shota; MORITA Yusuke; TANAKA Kazuto; KATAYAMA Tsutao; NAKAMACHI Eiji
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2009(84) "7 - 15", 16 Mar. 2009 - 709 Effect of BaTiO_3 Thin Film Coating on Osteogenic Differentiation
TATEYAMA Yuki; MORITA Yusuke; FURUYA Keiju; TANAKA Kazuto; KATAYAMA Tsutao; NAKAMACHI Eiji
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2009(84) "7 - 14", 16 Mar. 2009 - Compressive deformation characteristic of bovine cancellous bone and evaluation of structural property by X-ray μCT
喜多 悠介; 田中 和人; 原田 雅規
JCOM講演論文集, [日本材料学会], 38 211 - 213, 10 Mar. 2009 - Effect of water absorption on the tensile fracture properties of continuous carbon fiber/polyamide composites
正部 祐季; 田中 和人; 倉鋪 憲
JCOM講演論文集, [日本材料学会], 38 288 - 291, 10 Mar. 2009 - Effect of water absorption on interfacial strength of carbon fiber/polycarbonate composites
柏原 仁; 田中 和人; 杉野 祐記
JCOM講演論文集, [日本材料学会], 38 296 - 298, 10 Mar. 2009 - Influence of nucleating agent for heat resistant and mechanical property of jute fabric reinforced PLA composites
桂 孝典; 田中 和人; 森田 有亮
JCOM講演論文集, [日本材料学会], 38 261 - 264, 10 Mar. 2009 - Influence of heat treatment on surface characteristics of electroless Ni-P/PTFE composite coatings
露木 幸一郎; 田中 和人; 片山 傳生
JCOM講演論文集, [日本材料学会], 38 177 - 180, 10 Mar. 2009 - 研究室紹介(19)同志社大学 生命医科学部 医工学科 バイオメカニクス研究室
田中 和人
強化プラスチックス, 強化プラスチック協会, 55(2) 77 - 80, Feb. 2009 - Molding of continuous fiber reinforced composite using electromagnetic induction heating system
田中 和人; 片山 傳生
The Science and engineering review of Doshisha University, 同志社大学理工学研究所, 49(4) 86 - 89, Jan. 2009 - 406 Manufacturing of a Single PLA Nanofiber for tensile test by electrospining method
南口 祐亮; 田中 和人; 三好 雄大; 片山 傳生
学術講演会講演論文集, 日本材料学会, 58 67 - 68, 2009 - OS1002 Development of Truss Finite Element Analysis Method to Obtain Miro・Macro Mechanical Properties of Cancellous Bone
YAMAZAKI Yasuhiro; KURAMAE Hiroyuki; TANAKA kazuto; MORITA Yusuke; KATAYAMA Tsutao; NAKAMACHI Eiji
The Proceedings of the Materials and Mechanics Conference, 一般社団法人 日本機械学会, 2009(0) 628 - 630, 2009 - Effects of BaTiO3 Piezoelectric Thin Film Coating on Activity of Rat Bone Marrow Cell
Yuki Tateyama; Yusuke Morita; Kazuto Tanaka; Tsutao Katayama; Eiji Nakamachi
WORLD CONGRESS ON MEDICAL PHYSICS AND BIOMEDICAL ENGINEERING, VOL 25, PT 10, SPRINGER, 25(10) 279 - 281, 2009, Summary international conference - The Influence of Trabecular bone structure on compression property of Bovine Cancellous bone
Kazuto Tanaka; Yusuke Kita; Masaki Harada; Tsutao Katayama
Proceedings of the 11th Japan International SAMPE Symposium & Exhibition, BM-1-1, 2009, Summary international conference - Heat-resistant property of jute continuous fiber reinforced PLA molded by electromagnetic induction heating system
Kazuto TANAKA; Takafumi KATSURA; Yusuke MORITA; Tsutao KATAYAMA; Masahiro SHINOHARA; Kazutaka UNO
Proceedings of the 11th Japan International SAMPE Symposium & Exhibition, GC-1-2, 2009, Summary international conference - Mechanical properties of carbon fiber reinforced polycarbonate composite
Kazuto Tanaka; Hitoshi Kashihara; Tsutao Katayama
Proceedings of the 11th Japan International SAMPE Symposium & Exhibition, PCM-2-1, 2009, Summary international conference - Lubrication Property of Hydrogel Layer on Articular Cartilage Surface
Takaki Tokuyama; Yusuke Morita; Kazuto Tanaka; Tsutao Katayama; Eiji Nakamachi
WORLD CONGRESS ON MEDICAL PHYSICS AND BIOMEDICAL ENGINEERING, VOL 25, PT 10, SPRINGER, 25(10) 276 - +, 2009, Summary international conference - Influence of Molding Time on the Mechanical Property of Jute Fabric Reinforced Thermoplastics
Kazuto Tanaka; Noriyuki Endo; Takafumi Katsura; Tsutao Katayama; Kazutaka Uno
Third China-Japan Joint Seminar on Green Composites, 2009, Summary national conference - Mechanical and Heat-Resistant Property of Jute Fabric Reinforced PLA Molded by Electromagnetic Induction Heating System
Kazuto Tanaka; Takafumi Katsura; Tsutao Katayama; Kazutaka Uno
Seico 09 Sampe Europe 30th. International Jubilee Conference and Forum, (Session8B) 524 - 530, 2009, Summary international conference - Mechanical properties of CFRTP/AFRTP hybrid composites molded by induction heating system
Kazuto Tanaka; Toshiki Uemura; Norio Kohashi; Tsutao Katayama
Progress of Composites 2008 in Asia and Australasia - Proceedings of the 6th Asian-Australasian Conference on Composite Materials, ACCM 2008, 25 - 28, Dec. 2008, Summary international conference - Influence of environmental degradation and Vitamin-E (α-tocopherol) addition on the fatigue crack growth property of ultra high molecular weight polyethylene
Kazuto Tanaka; Akimasa Kamimura; Tsutao Katayama; Sadamu Kinoshita; Hideyuki Sakoda; Koichi Kuramoto
Zairyo/Journal of the Society of Materials Science, Japan, 57(9) 875 - 881, Sep. 2008 - Extraction of bamboo fiber using superheated steam method
長谷川 剛史; 田中 和人; 榎 真一
JCOM講演論文集, [日本材料学会], 37 126 - 130, 18 Mar. 2008 - Experiemntal study of spinning and mechanical properties of stereocomplex-type polylactic acid fiber using the melt-spinning method
立山 優貴; 川崎 智洋; 田中 和人
JCOM講演論文集, [日本材料学会], 37 5 - 8, 18 Mar. 2008 - Evaluation of surface characteristics of electroless Ni-P/PTFE composite coatings
小田 宏; 田中 和人; 片山 傳生
JCOM講演論文集, [日本材料学会], 37 280 - 284, 18 Mar. 2008 - Influence of cross-section shape of reinforcing fiber on the mechanical properties of glass fiber reinforced thermo plastics manufactured by injection molding
安栗 章浩; 田中 和人; 谷野 隆史
JCOM講演論文集, [日本材料学会], 37 300 - 304, 18 Mar. 2008 - 704 海綿骨の力学特性と超音波特性の関係(生体・医療材料I,生体・医療材料,オーガナイスドセッション9)
田中 和人; 原田 雅規; 片山 傳生; 松川 真美
学術講演会講演論文集, 日本材料学会, 57 173 - 174, 2008 - 308 Rolling process optimum design by using crystal plasticity multi-scale analysis
TAKAHASHI Shouji; NAKAMACHI Eiji; KURAMAE Hiroyuki; TANAKA Kazuto; KATAYAMA Tsutao; MORIMOTO Hideo
The Proceedings of The Computational Mechanics Conference, 一般社団法人 日本機械学会, 2008(0) 472 - 473, 2008 - OS1107 Evaluation of Mechanical Properties of Collagen Thin Films
CHIKAZAWA Hiroaki; TANAKA Kazuto; KATAYAMA Tsutao; KOIZUMI Noriko; MORITA Yusuke; NAKAMACHI Eiji
The Proceedings of the Materials and Mechanics Conference, 一般社団法人 日本機械学会, 2008(0) _OS1107 - 1_-_OS1107-2_, 2008 - Bending Test of Polysilicon Thin Microelements and Crystal Orientation Analysis
Kentaro Azuma; Kazuto Tanaka; Tsutao Katayama; Kohji Minoshima
PROCEEDINGS OF THE 25TH SENSOR SYMPOSIUM,2008, 775 - 776, 2008, Summary international conference - Effects of Water Absorption on Mechanical Properties and Surface Morphology of Stereocomplex-type Poly (lactic Acid) Fiber
Kazuto Tanaka; Yuki Tateyama; Tomohiro Kawasaki; Tutao Katayama; Suong-Hyu Hyon
IWGC-5, Fifth International Workshop on Green Composites, 121 - 124, 2008, Summary international conference - Mechanical Properties of Jute Fabric Reinforced PLA Nonwoven Sheet Composite
Kazuto Tanaka; Toshiki Uemura; Norio Kohashi; Tsutao Katayama
IWGC-5, Fifth International Workshop on Green Composites, 37 - 40, 2008, Summary international conference - Evaluation of Mechanical Properties of a Single Electrospun SCPLA Nanofiber
Kazuto Tanaka; Yuuta Miyoshi; Tsutao Katayama
IWGC-5, Fifth International Workshop on Green Composites, 13 - 16, 2008, Summary international conference - Relationship Between Mechanical Properties and Acoustic Parameters Obtained from Fast and Slow Waves for Cancellous Bone.
Masaki Harada; Kazuto Tanaka; Tsutao Katayama; Katsunori Mizuno; Hiroki Soumiya; Mami Matsukawa
Acustica United with Acustica, 94(Suppl1) 665 , 2008, Summary international conference - Environmental degradation of stereocomplex-type polylactic acid fiber
Kazuto Tanaka; Tomohiro Kawasaki; Tsutao Katayama; Suong-Hyu Hyon
13th European Conference on Composite Materials (ECCM13), 0239, 2008, Summary international conference - Sheet Metal Process Design by using Multi-Scale Finite Element Analysis and Optimization Algorithm
Shoji Takahashi; Kazuto Tanaka; Tsutao Katayama; Eiji Nakamachi; Hiroyuki Kuramae; Nguyen Ngoc Tam
Proc. of Numisheet2008, 373 - 378, 2008, Summary international conference - Mechanical properties of jute fabric reinforced thermoplastic moulded by high-speed processing using electromagnetic induction
K. Tanaka; T. Katsura; Y. Kinoshita; T. Katayama; K. Uno
HIGH PERFORMANCE STRUCTURES AND MATERIALS IV, WIT PRESS/COMPUTATIONAL MECHANICS PUBLICATIONS, 97 211 - +, 2008 - Eco-efficient manufacturing process for fibre reinforced thermoplastic
K. Tanaka; T. Katayama; K. Uno
HIGH PERFORMANCE STRUCTURES AND MATERIALS IV, WIT PRESS/COMPUTATIONAL MECHANICS PUBLICATIONS, 97 203 - +, 2008 - 805 Mechanical Properties of Stereocomplex-type Polylactic Acid Fiber
KAWASAKI Tomohiro; KADOTA Shinji; TANAKA Kazuto; KATAYAMA Tsutao; HYON Suong-Hyu
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2007(82) "8 - 5", 16 Mar. 2007 - Mechanical characterization of electroless Ni-P-W coatings
郡司 海; 田中 和人; 湯川 晃宏
JCOM講演論文集, [日本材料学会], 36 315 - 318, 08 Mar. 2007 - Injection molding of flat glass fiber reinforced thermo plastics
田中 和人; 小川 洸一; 片山 傳生
JCOM講演論文集, [日本材料学会], 36 179 - 183, 08 Mar. 2007 - Molding of carbon fiber reinforced thermoplastic using rapid heating and cooling system
木下 陽平; 田中 和人; 片山 傳生
JCOM講演論文集, [日本材料学会], 36 255 - 259, 08 Mar. 2007 - Fatigue crack growth property of ultra high molecular weight polyethylene used for artificial knee joints
上村 明正; 田中 和人; 片山 傳生
JCOM講演論文集, [日本材料学会], 36 344 - 347, 08 Mar. 2007 - Finite Element Analysis of Young's Modulus for Polysilicon Thin Film Using Crystal Orientation Analysis
Tanaka Kazuto; Imoto Takehiro
The science and engineering review of Doshisha University, Doshisha University, 47(4) 73 - 78, Jan. 2007 - 異周速圧延による集合組織発展のマルチスケール有限要素解析
高橋聖治; 田中和人; 片山傳生; 仲町英治; 森本秀夫; 倉前宏行; NGUYEN Ngoc Tam; 中村康範
塑性加工連合講演会講演論文集, 58th, 2007 - 2609 Analyses of Texture Evolution in Asymmetric Rolling Process by Using Dynamic Explicit Crystallographic Homogenized Elasto/viscoplastic Finite Element Method
TAKAHASHI Shoji; Tam Nguyen Ngoc; TANAKA Kazuto; KATAYAMA Tsutao; NAKAMACHI Eiji; KURAMAE Hiroyuki
The Proceedings of The Computational Mechanics Conference, 一般社団法人 日本機械学会, 2007(0) 151 - 152, 2007 - High Speed Molding of Carbon Fiber Reinforced Thermoplastic Using Electromagnetic Induction
Kazuto Tanaka; Norio Kohashi; Yohei Kinoshita; Yuki Masabe; Tsutao Katayama
10th Japan International SAMPE Symposium & Exhibition (JISSE-10) PMC_6_2.pdf, PMC_6_2.pdf, 2007, Summary international conference - Evaluation of Mechanical Properties of Polycrystalline Silicon Thin Films under Tensile Loading
Kohji Minoshima; Kazuto Tanaka; Hiroki Yokote; Ryo Tomoida; Kenjiro Komai
the 7th International Conference on Advanced Technology in Experimental Mechanics (ATEM'07), 40 , 2007, Summary international conference - Load Dispersion Ability Under Dynamic Loading of Solid-Air Composites Developed by Biomimetic Design
Kazuto Tanaka; Masatoshi Yamada; Koji Kamada; Tsutao Katayama; Hidetake Yamamoto
THE INTERNATIONAL CONFERENCE ON STRUCTURAL ANALYSIS OF ADVANCED MATERIALS ICSAM 2007 Book of abstracts, 26 , 2007, Summary international conference - Mechanical Property of Carbon Fiber Reinforced Thermoplastics Moulded by High-speed Processing using Electromagnetic Induction
Processing & Manufacturing, 39 - 40, 2007 - 729 Development of Solid-Air Composites superior in load dispersion ability by biomimetics
Kamada Koji; Katayama Tsutao; Tanaka Kazuto
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2006(81) "7 - 29", 17 Mar. 2006 - 808 Development of Method to Estimate the Amount of Residual Antifreezing Agent : Relationship between Amount of Residual Antifreezing Agent and Slipping Resistance of Road
HAMAMOTO Shinsuke; TANAKA Kazuto; KATAYAMA Tsutao
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2006(81) "8 - 8", 17 Mar. 2006 - 813 Texture Evolution Analysis during Rolling Process by Crystal Plasticity Finite Element Method
KATAYAMA Tsutao; TANAKA Kazuto; KAWAMURA Rie; NAKAMACHI Eiji; MORIMOTO Hideo
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2006(81) "8 - 13", 17 Mar. 2006 - 609 Development of Ni-P/PTFE Plating Technology and Characterization of lts Surface Properties
YUKAWA Akihiro; HASHIMOTO Masako; TANAKA Kazuto; KATAYAMA Tsutao
学術講演会講演論文集, 日本材料学会, 55 158 - 159, 2006 - 417 Effects of Vitamin-E addition on fatigue crack growth behavior of ultra-high molecular weight polyethylene
TANAKA Kazuto; UCHIYAMA Masatoshi; SAKODA Hideyuki
学術講演会講演論文集, 日本材料学会, 55 309 - 310, 2006 - Injection molding of glass fiber reinforced thermoplastics using FF-LFT (flat fiber-long fiber thermolastic) pellets
Kazuto Tanaka; Koichi Ogawa; Tsutao Katayama; Takashi Yano; Tatsuya Tanaka; Takayasu Fujiura
ECCM 12 12th European Conference on Composite Materials Paper Number468, Paper Number468, 2006, Summary international conference - Database construction by genetic algorithm for expert system using fuzzy pattern matching
Shinichi Enoki; Kenichi Akamatsu; Yoji Tanaka; Rie Kawamura; Kazuto Tanaka; Tsutao Katayama
3RD INT CONF ON CYBERNETICS AND INFORMATION TECHNOLOGIES, SYSTEMS, AND APPLICAT/4TH INT CONF ON COMPUTING, COMMUNICATIONS AND CONTROL TECHNOLOGIES, VOL 1, INT INST INFORMATICS & SYSTEMICS, 1 107 - 111, 2006, Summary international conference - Report on Carbon Nanotube (CNT) : Polymer Composites International Conference
TANAKA Kazuto
Journal of the Society of Materials Science, Japan, The Society of Materials Science, Japan, 54(12) 1321 - 1322, 15 Dec. 2005 - Evaluation of the interfacial properties in an aramid fiber/epoxy model composite using micro-Raman spectroscopy
Kazuto Tanaka; Kohji Minoshima; Kumiko Kawano; Kenjiro Komai
11th International Conference on Fracture 2005, ICF11, 2 898 - 903, Dec. 2005, Summary international conference - 813 The Performances of Vitamin E (D, L-α-Tocopherol) added Ultra High Molecular Weight Polyethylene for Artificial Knee Components
TERAMURA Satoshi; TOMITA Naohide; Pezzotti Giuseppe; NIWA Yasuhito; TANAKA Kazuto; ISU Toshiro
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2005(80) "8 - 25"-"8-26", 18 Mar. 2005 - 927 Influence of Hydrogen Charging on the Nanoscopic Deformation Behavior in a High-Strength Steel
MINOSHIMA Kohji; TANAKA Kazuto; ISHIGAKI Yusuke
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2005(80) "9 - 53"-"9-54", 18 Mar. 2005 - 915 Mechanical properties and fatigue behavior of polysilicon thin films under tensile and bending loading
MINOSHIMA Kohji; TANAKA Kazuto; OGINO Yohei
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2005(80) "9 - 29"-"9-30", 18 Mar. 2005 - 114 Crystal Orientation Analysis and Finite Element Analysis of Young's Modulus for Poly-silicon Thin Film
TANAKA Kazuto; IMOTO Takehiro; MINOSHIMA Kohji
材料力学部門春のシンポジウム講演論文集, 日本機械学会, 2005 37 - 40, 2005 - 1748 Evaluation of the mechanical property of ultra high molecular weight polyethylene fiber
TANAKA Kazuto; UCHIYAMA Masatoshi; TSUMORI Fujio; SHIMA Susumu; TOMITA Naohide
The proceedings of the JSME annual meeting, The Japan Society of Mechanical Engineers, 2005(0) 399 - 400, 2005 - 819 Effect of Temperature Control in Bingham Semi-solid/fluid Isostatic Pressing
Tsumori Fujio; Kazawa Yusuke; Tanaka Kazuto; Shima Susumu
The Proceedings of Conference of Kansai Branch, The Japan Society of Mechanical Engineers, 2005(0) _8 - 37_-_8-38_, 2005 - 816 Development of Visualization Method of Localized Hydrogen Distribution based upon Silver Decoration Method
MINOSHIMA Kohji; TANAKA Kazuto; BITO Takakazu
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2004(79) "8 - 29"-"8-30", 17 Mar. 2004 - 818 In-situ Nanoscopic Observation of Environmentally Induced Crack Growth in High-strength Stainless Steel under Dynamic Loading Conditions
MINOSHIMA Kohji; TANAKA Kazuto; TAKEMURA Takashi
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2004(79) "8 - 33"-"8-34", 17 Mar. 2004 - 819 Environmentally Induced Cracking of High-Strength Steels under Dynamic Loading Conditions and Thermal Desorption Hydrogen Spectroscopy
MINOSHIMA Kohji; TANAKA Kazuto; SHIMOIDA Masumi
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2004(79) "8 - 35"-"8-36", 17 Mar. 2004 - 708 Influence of Artificial Micro Defect and Wet Environment on the Property of Static and Dynamic Environmental Strength of Silica Glass Optical Fiber
MINOSHIMA Kohji; TANAKA Kazuto; ISHIDA Shinji
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2004(79) "7 - 15"-"7-16", 17 Mar. 2004 - Fracture Behavior of Polycrystalline Silicon Thin Films under Tensile Loading
MINOSHIMA Kohji; TANAKA Kazuto; TOMOIDA Ryo; YOKOTE Hiroki; KOMAI Kenjiro
電気学会研究会資料. MSS, マイクロマシン・センサシステム研究会, 2004(1) 1 - 4, 27 Feb. 2004 - 112 日本材料学会標準S-N曲線回帰法による鉄鋼材料の疲労特性の検討(鉄鋼材料の疲労強度特性,疲労の機構と強度信頼性,オーガナイスドセッション1,第53期学術講演会)
菅田 淳; 岡田 憲司; 尾野 英夫; 境田 彰芳; 首藤 俊夫; 田中 和人; 中島 正貴; 中曽根 祐司; 中易 秀俊; 西川 出; 花木 聡; 横幕 俊典; 吉岡 純夫; 酒井 達雄
学術講演会講演論文集, 日本材料学会, 53 23 - 24, 2004 - 103 石英ガラス光ファイバの動的環境強度に及ぼす水環境の影響(セラミックスと高分子,疲労の機構と強度信頼性,オーガナイスドセッション1,第53期学術講演会)
箕島 弘二; 田中 和人; 石田 進二
学術講演会講演論文集, 日本材料学会, 53 5 - 6, 2004 - Evaluation of the Fiber/Matrix Interfacial Properties under Static and Fatigue Loading using Model Composites
TANAKA Kazuto; MINOSHIMA Kohji; GRELA Witold; ARAKI Yuji; KOMAI Kenjiro
Proceedings of the ... annual meeting of JSME/MMD, The Japan Society of Mechanical Engineers, 2003 189 - 190, 23 Sep. 2003 - 石英ガラスファイバの静的および動的強度特性に及ぼす水環境の影響 (第234回例会 Workshop『若手技術者による腐食・防食Ⅺ』)
箕島 弘二; 田中 和人; 石田 進二
腐食防食部門委員会資料, 日本材料学会, 42(234) 15 - 20, 16 Sep. 2003 - OS05W0161 Effects of stress waveform and wet environment on fatigue fracture behavior of aramid single fiber and AFM damage evaluation
Tanaka Kazuto; Minoshima Kohji; Oya Takahiro; Komai Kenjiro
Abstracts of ATEM : International Conference on Advanced Technology in Experimental Mechanics : Asian Conference on Experimental Mechanics, The Japan Society of Mechanical Engineers, 2003(2) "OS05W0161 - 1"-"OS05W0161-6", 10 Sep. 2003 - (3)繊維強化樹脂基複合材料の衝撃および疲労破壊特性に及ぼす環境効果の研究(研究奨励)(日本機械学会賞〔2002年度(平成14年度)審査経過報告〕)
田中 和人
日本機械学會誌, 一般社団法人日本機械学会, 106(1014) 350 - 350, 05 May 2003 - 322 薄膜マイクロエレメント機械的特性評価システムの開発(薄膜の創成と特性評価-II)(一般セッション)
箕島 弘二; 田中 和人; 友井田 亮; 横手 広樹; 駒井 謙治郎
学術講演会講演論文集, 日本材料学会, 52 305 - 306, 2003 - 306 顕微ラマン分光によるアラミド単繊維引き抜き過程の繊維応力分布解析(繊維の応力評価・測定精度)(残留応力の評価と適用)(オーガナイスドセツション2)
田中 和人; 箕島 弘二; 河野 久美子; 駒井 謙治郎
学術講演会講演論文集, 日本材料学会, 52 69 - 70, 2003 - Development of testing system for mechanical properties of microelement thin film
MINOSHIMA Kohji; TANAKA Kazuto; YOKOTE Hiroki; TOMOIDA Ryo; KOMAI Kenjiro
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2003(78) "6 - 27"-"6-28", 2003 - Evaluation of mechanical properties of polysilicon microelements under tensile loading
MINOSHIMA Kohji; TANAKA Kazuto; TOMOIDA Ryo; YOKOTE Hiroki; KOMAI Kenjiro
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2003(78) "2 - 5"-"2-6", 2003 - Effect of wet environment on propagation of Aramid/Epoxy interfacial debonding under fatigue loading
MINOSHIMA Kohji; TANAKA Kazuto; ARAKI Yuji; KOMAI Kenjiro
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2003(78) "1 - 5"-"1-6", 2003 - Evaluation of Mechanical Properties of Stainless Steel Microelements Manufactured by Electrical Discharge Machining
MINOSHIMA Kohji; TANAKA Kazuto; SAKAMOTO Tomokazu; KOMAI Kenjiro
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2002(77) "1 - 27"-"1-28", 2002 - Influence of Water Absorption on Aramid/Epoxy Interfacial Properties
TANAKA Kazuto; MINOSHIMA Kohji; KOMAI Kenjiro; GRELA Witold
M&Mレイクサイドサマーシンポジウム講演論文集, 日本機械学会, 2002 28 - 31, 2002 - 237 高精度放電加工による金属薄膜微小試験片の創製と引張・疲労破壊特性評価
箕島 弘二; 田中 和人; 坂本 朝和; 駒井 謙治郎
学術講演会講演論文集, 日本材料学会, 51 257 - 258, 2002 - 706 Effects of wet environment on fracture properties of Al_2O_3 single fiber
MINOSHIMA Kohji; TANAKA Kazuto; FUJINAMI Tatsuya; KOMAI Kenjiro
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2001(76) "7 - 11"-"7-12", 16 Mar. 2001 - 1113 Strain Measurements by Laser Speckle Method and Evaluation of Mechanical Properties of Metallic Microelement
KOMAI Kenjiro; MINOSHIMA Kohji; TANAKA Kazuto; SUGAI Takao
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2000(75) "11 - 25"-"11-26", 16 Mar. 2000 - 406 Influence of Water Absorption on Impact and Compression Fracture Behavior of CFRP/Aramid Honeycomb Core Sandwich Panel
KOMAI Kenjiro; MINOSHIMA Kohji; TANAKA Kazuto; GOSHIMA Daisuke
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2000(75) "4 - 15"-"4-16", 16 Mar. 2000 - 405 Effects of Stress Waveform and Water Absorption on Fatigue Strength of Unidirectionally Reinforced Aramid/Epoxy Composite
KOMAI Kenjiro; MINOSHIMA Kohji; TANAKA Kazuto; TOKURA Tomomi
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2000(75) "4 - 13"-"4-14", 16 Mar. 2000 - 402 Effects of Stress Waveform and Wet Environment on Fatigue Fracture Behavior of Aramid Single Fiber
MINOSHIMA Kohji; TANAKA Kazuto; OOYA Takahiro; KOMAI Kenjiro
関西支部講演会講演論文集, The Japan Society of Mechanical Engineers, 2000(75) "4 - 7"-"4-8", 16 Mar. 2000 - 203 単繊維引き抜き法によるアラミド繊維/エポキシ樹脂界面強度評価
駒井 謙治郎; 箕島 弘二; 田中 和人; Witold Grela
学術講演会講演論文集, 日本材料学会, 49 37 - 38, 2000 - 220 アラミド繊維強化複合材料の疲労破壊特性に及ぼす応力波形・水環境効果
駒井 謙治郎; 箕島 弘二; 田中 和人; 徳良 具巳
学術講演会講演論文集, 日本材料学会, 48 79 - 80, 1999 - 513 CF/PEEK 複合材料の疲労特性に及ぼす応力波形・水環境効果
駒井 謙治郎; 箕島 弘二; 田中 和人; 保仙 裕
学術講演会講演論文集, 日本材料学会, 47 377 - 378, 1998 - 320 アラミド繊維強化エポキシ樹脂基複合材料の衝撃・圧縮破壊特性と水環境効果
駒井 謙治郎; 箕島 弘二; 田中 和人
学術講演会講演論文集, 日本材料学会, 45 171 - 172, 1996
Books etc
- 初心者のための疲労用語の解説（分担執筆）
日本材料学会, 2015 - New：Mechanics and Materials()
TANAKA Kazuto
培風館, 2008, Contributor, 171-186 - 改訂 材料強度学
日本材料学会, 2005, Contributor - 金属材料疲労信頼性評価標準【S-N曲線回帰法】改訂版（学会標準）
日本材料学会, 2004, Contributor, 15, 26 - 初心者のための疲労設計法（共同執筆）
日本材料学会, 2004
Presentations
- 小型月面探査ローバーの車輪形状が及ぼす走行性能への影響
永江尚也; 渡辺公貴; 田中和人; 川口正隆
日本航空宇宙学会，第 65 回宇宙科学技術連合講演会講演集, 10 Nov. 2021, 09 Nov. 2021, 12 Nov. 2021, Poster presentation - 多段モード合成法によるガタ構造系の振 動解析に関する基礎検討
川口 正隆; 坂手洸希; 田中和人; 渡辺公貴
⽇本機械学会 Dynamics and Design Conference 2021（D&D2021）, 15 Sep. 2021, 13 Sep. 2021, 17 Sep. 2021, Oral presentation - 接着剤の疲労特性に基づく接着接合部の疲労強度推定
倉橋宗俊; 川口正隆; 田中和人; 渡辺公貴
⽇本機械学会 M&M 2021 材料⼒学カンファレンス, 16 Sep. 2021, 15 Sep. 2021, 16 Sep. 2021, Oral presentation - 樹脂製燃料タンクに対する疲労強度推定法の検討
野口剛; 川口正隆; 嶋田拳史郎; 田中和人; 渡辺公貴
⽇本機械学会 M&M 2021 材料⼒学カンファレンス, 15 Sep. 2021, 15 Sep. 2021, 16 Sep. 2021, Oral presentation - 小型探査ローバーの登坂性能評価
田中望己; 渡辺公貴; 田中和人; 川口正隆
日本航空宇宙学会，第63回構造強度に関する講演会, 05 Aug. 2021, 04 Aug. 2021, 06 Aug. 2021 - マイクロドロップレット試験により求めた炭素繊維とポリアミド６の界面せん断強度に及ぼす樹脂玉作製方法の影響
京山周平; 竹中俊城; 川口正隆; 渡辺公貴; 田中和人
日本材料学会第70期学術講演会, 29 May 2021, 28 May 2021, 30 May 2021, Oral presentation - 高温下における炭素繊維/二酸化ケイ素添加ポリアミド６樹脂の繊維樹脂界面強度
森岡宣彦; 上田真央; 川口正隆; 渡辺公貴; 田中和人
日本材料学会第70期学術講演会, 29 May 2021, 28 May 2021, 30 May 2021, Oral presentation - 導電性付与スプレーを用いたエレクトロスピニング法におけるPLAナノファイバー厚膜不織布の創製
山室奈々美; 田中和人; 片山傳生
日本材料学会第69期学術講演会, 30 May 2020, Oral presentation - 炭素繊維とPA6のぬれ性に及ぼす炭素繊維表面に析出させたCNT長さの影響
竹中俊城; 片山傳生; 田中和人
日本材料学会第69期学術講演会, 30 May 2020, Oral presentation - マグネタイト／PLAナノファイバーにおけるマグネタイトの分散性に及ぼすマグネタイト表面処理および超音波攪拌の影響
石井裕太; 片山傳生; 田中和人
日本材料学会 第68期学術講演会, 26 May 2019, 24 May 2019, 27 May 2019, Oral presentation - CNT／PA6ナノファイバーの引張強度とCNTの分散に及ぼす表面処理の影響
鎌田昌樹; 田中和人; 片山傳生
日本材料学会 第68期学術講演会, 25 May 2019, 24 May 2019, 27 May 2019, Oral presentation - ポリアミド樹脂を接着剤に用いて摩擦撹拌点接合した CFRP/Al のせん断特性評価
丹羽一将; 片山傳生; 田中和人; 西口勝也
日本材料学会 第68期学術講演会, 25 May 2019, 24 May 2019, 27 May 2019, Oral presentation - CFRTP積層板の衝撃特性に及ぼす炭素繊維表面へのCNT析出の影響
太秦健; 片山傳生; 田中和人
日本材料学会 第67期学術講演会, 25 May 2018, 25 May 2018, 27 May 2018, Oral presentation - Evaluation of Shear Deformation of Carbon Fiber Non‐Crimp Fabric by Non‐contact 3D Strain Measurement System
釘屋裕基; 田中和人; 片山傳生
日本複合材料合同会議(Web), 2018 - Effect of Injection Volume on Bending Strength for Glass Fiber Reinforced Polypropylene Composites Molded by Press and Injection Hybrid Molding
烏野魁人; 田中和人; 片山傳生
日本複合材料合同会議(Web), 2018 - Composite Europeにおける自動車用途コンポジット
田中 和人
第9回自動車用途コンポジットシンポジウム, 17 Nov. 2017, Oral presentation - PA12エラストマーを接着剤に⽤いたCFRP/Alの摩擦撹拌点接合強度に及ぼす加圧時間の影響
寺村拓也; 片山傳生; 田中和人; 口勝也
第9回自動車用途コンポジットシンポジウム, 17 Nov. 2017, Poster presentation - CFRTP直接通電抵抗加熱溶着の曲げ接着強さに及ぼすCNT析出炭素繊維の影響
砥一央; 片山傳生; 田中和人
第9回自動車用途コンポジットシンポジウム, 17 Nov. 2017, Poster presentation - 上⾦型のみに直接通電した⾦型の温度分布有限要素解析
赤松駿; 田中和人; 片山傳生
第9回自動車用途コンポジットシンポジウム, 17 Nov. 2017, Poster presentation - CF/PA6ランダム材を用いたハイブリッド成形品の機械的特性に及ぼすリブ根元形状の影響
嘉悦正臣; 田中和人; 石川健
第9回自動車用途コンポジットシンポジウム, 17 Nov. 2017, Poster presentation - CF/PPランダム材を⽤いたプレス射出ハイブリッド成形品の機械的特性に及ぼすリブへの⼊り込み⾼さの影響
野口慧; 片山傳生; 田中和人; 石川健
第9回自動車用途コンポジットシンポジウム, 17 Nov. 2017, Poster presentation - 溶融熱可塑性樹脂を⽤いたRTM成形によるGFRTPの機械的特性に及ぼすプレス条件の影響
平田晃浩; 近藤佑亮; 片山傳生; 田中和人
第9回自動車用途コンポジットシンポジウム, 17 Nov. 2017, Poster presentation - 炭素繊維／高耐熱性ポリアミド複合材料の引張強度に及ぼす成形条件の影響
竹井利昭; 田中和人; 片山傳生
第9回自動車用途コンポジットシンポジウム, 17 Nov. 2017, Poster presentation - ポリアミド12エラストマー層を有する炭素繊維強化ポリアミド12積層板の衝撃特性評価
大野花甫里; 片山傳生; 田中和人
第9回自動車用途コンポジットシンポジウム, 17 Nov. 2017, Poster presentation - CNT析出炭素繊維の直接通電抵抗加熱特性評価
田中応佳; 片山傳生; 田中和人
第3回材料WEEK 材料シンポジウム 若手学生研究発表会, 11 Oct. 2017, Poster presentation - ガラス繊維強化分解制御型ポリ乳酸複合材料の繊維樹脂界面特性に及ぼす熱処理の影響
稲垣 歩; 田中和人
第3回材料WEEK 材料シンポジウム 若手学生研究発表会, 11 Oct. 2017, Poster presentation - 炭素繊維表面へのCNT 析出形態と炭素繊維ポリアミド樹脂界面強度に及ぼすサイジング剤の影響
樋上佳孝; 杉原愛美; 片山傳生; 田中和人
第3回材料WEEK 材料シンポジウム 若手学生研究発表会, 11 Oct. 2017, Poster presentation - エレクトロスピニング法におけるPETファイバー表面へのディンプル形成
川崎涼太; 冨澤舞; 田中和人; 片山傳生; 森田有亮
日本材料学会 第66期学術講演会, 28 May 2017, Oral presentation - CNT／PA6ナノファイバーの引張強度に及ぼす
常徳慧; 田中和人; 片山傳生
日本材料学会 第66期学術講演会, 27 May 2017, Oral presentation - CF／PC の層間せん断強度と落錘式衝撃特性に及ぼすPCの分子量の影響
竹本啓輔; 鈴江真弘; 田中和人; 片山傳生
第8回自動車用途コンポジットシンポジウム, 11 Nov. 2016, Poster presentation - CF/PA6の高温引張特性に及ぼす織物基材の形態の影響
曽根真純; 田中和人; 片山傳生
第8回自動車用途コンポジットシンポジウム, 11 Nov. 2016, Poster presentation - CFRTPの丸鋸加工における内部損傷評価
山城太紀; 田中和人; 片山傳生
第8回自動車用途コンポジットシンポジウム, 11 Nov. 2016, Poster presentation - ブランク面内引張力を用いたCFRTPのダイヤフラム成形におけるせん断角度評価
釘屋裕基; 牛山廉; 片山傳生; 田中和人; 篠原正浩
第8回自動車用途コンポジットシンポジウム, 11 Nov. 2016, Poster presentation - 炭素繊維／高耐熱性ポリアミド樹脂モデルコンポジットの界面せん断強度に及ぼす温度の影響
細尾菜々子; 田中和人; 片山傳生
第8回自動車用途コンポジットシンポジウム, 11 Nov. 2016, Poster presentation - プレス射出ハイブリッド成形品の界面強度に及ぼすCNT析出開繊糸の影響
時川大佑; 田中和人; 片山傳生; 榎真一
第8回自動車用途コンポジットシンポジウム, 11 Nov. 2016, Poster presentation - 直接通電抵抗加熱溶着により接合したCFRTPの引張せん断接着強さに及ぼす炭素繊維へのCNT析出時間の影響
青砥一央; 片山傳生; 森田有亮; 田中和人
第8回自動車用途コンポジットシンポジウム, 11 Nov. 2016, Poster presentation - CNT析出炭素繊維強化熱可塑樹脂積層板の導電性
山田翔太; 田中和人; 片山傳生; 内藤公喜
第8回自動車用途コンポジットシンポジウム, 11 Nov. 2016, Poster presentation - K2016 における自動車用途コンポジット
田中 和人
第8回自動車用途コンポジットシンポジウム, 11 Nov. 2016, Oral presentation - CF/PPスリット入りUD材を用いたハイブリッド成形品表面材の機械的特性評価
野口慧; 原田雄大; 田中和人; 片山傳生; 石川健; 冨岡正雄
日本材料学会 第65期学術講演会, 29 May 2016, Oral presentation - マグネタイト／PLA複合ナノファイバーの力学的特性に及ぼすマグネタイトの添加量の影響
岡田卓也; 本橋優人; 片山傳生; 田中和人
日本材料学会 第65期学術講演会, 29 May 2016 - 炭素繊維表面上へのCNT 析出に及ぼす析出条件の影響
山崎鷹之; 前田玄太; 田中和人; 片山傳生; 森田有亮
第7回 日本複合材料会議（JCCM-7）, 17 Mar. 2016, Oral presentation - 1H43 Development of Porous PLLA Microfiber Scaffold by Electrospinning Method
NARISADA Ryosuke; MORITA Yusuke; KATAYAMA Tsutao; TANAKA Kazuto; NAKAMACHI Eiji
バイオエンジニアリング講演会講演論文集, 09 Jan. 2016, 09 Jan. 2016, 09 Jan. 2016, The Japan Society of Mechanical Engineers - 有限要素法によるＦＲＴＰのダイヤフラム成形解析
尾川雅洋; 田中和人; 片山傳生
第7回自動車用途コンポジットシンポジウム, 13 Nov. 2015, Poster presentation - 無電解ニッケルめっきを触媒としたCNT析出炭素繊維とPA6の繊維樹脂界面強度に及ぼすCNTの影響
深井豪大; 黒岡裕貴; 片山傳生; 田中和人
第7回自動車用途コンポジットシンポジウム, 13 Nov. 2015, Poster presentation - CFRTP直接通電抵抗加熱溶着の引張せん断強度に及ぼす炭素繊維表面へのＣＮＴ析出の影響
田中裕大; 田中和人; 片山傳生
第7回自動車用途コンポジットシンポジウム, 13 Nov. 2015, Poster presentation - CFRTPの曲げ特性に及ぼすマトリックス樹脂供給形態の影響
前畑俊輔; 片山傳生; 田中和人
第7回自動車用途コンポジットシンポジウム, 13 Nov. 2015, Poster presentation - CF／PAの界面強度に及ぼす高温環境の影響
西尾純; 田中和人; 片山傳生
第7回自動車用途コンポジットシンポジウム, 13 Nov. 2015, Poster presentation - 直接通電抵抗加熱を用いたCNT析出炭素繊維の加熱特性評価
須江竜字; 田中和人; 片山傳生
第7回自動車用途コンポジットシンポジウム, 13 Nov. 2015, Poster presentation - 抄紙型中間素材を用いたＣＦＲＴＰの機械的特性に 及ぼす成形圧力の影響
山田匠; 森糸恒平; 片山傳生; 田中和人
第7回自動車用途コンポジットシンポジウム, 13 Nov. 2015, Poster presentation - ガラス繊維強化易分解性ポリ乳酸複合材料の機械的特性に及ぼす水環境の影響
宮村美里; 田中和人; 片山傳生; 吉川成志; 片山傳喜
第7回自動車用途コンポジットシンポジウム, 13 Nov. 2015, Poster presentation - 直接通電抵抗加熱溶着法を用いたCFRTPの接合強度に及ぼす通電時間と圧力の影響
岡田健志; 田中和人; 片山傳生
第7回自動車用途コンポジットシンポジウム, 13 Nov. 2015, Poster presentation - ＣＮＴ析出炭素繊維とＰＡ6樹脂との界面強度に及ぼすＣＮＴ析出長さの影響
奥村祐規; 片山傳生; 森田有亮; 田中和人
第7回自動車用途コンポジットシンポジウム, 13 Nov. 2015, Poster presentation - IAA(66thフランクフルト･モーターショー）における複合材料技術とComposite Europe
田中和人
第7回自動車用途コンポジットシンポジウム, 13 Nov. 2015, Oral presentation - CF/PPスリット入りUD材を用いたプレス射出 ハイブリッド成形とその機械的特性評価
原田雄大; 片山傳生; 田中和人; 石川健; 冨岡正雄
成形加工シンポジア’15 福岡, 03 Nov. 2015, Oral presentation - CF/PCの曲げ破壊特性と繊維樹脂界面強度に及ぼすPCの分子量の影響
鈴江真弘; 片山傳生; 田中和人
日本材料学会，第1回材料WEEK材料シンポジウム, 15 Oct. 2015, Oral presentation - GF/PA6プレス射出ハイブリッド成形品の リブ根元強度に及ぼす射出素材の影響
野口隆一; 藤田耀平; 片山傳生; 田中和人
日本材料学会，第1回材料WEEK，材料シンポジウム, 15 Oct. 2015, Oral presentation - OS12-12 Effect of Humidity on Diameter of Polyamide 6 Nanofiber in Electrospinning Process(Mechanical properties of nano- and micro-materials-4,OS12 Mechanical properties of nano- and micro-materials,MICRO AND NANO MECHANICS)
Tanaka Kazuto; Tomizawa Mai; Katayama Tsutao
Abstracts of ATEM : International Conference on Advanced Technology in Experimental Mechanics : Asian Conference on Experimental Mechanics, 04 Oct. 2015, 04 Oct. 2015, 04 Oct. 2015, The Japan Society of Mechanical Engineers - OS13-5 Effect of Temperature on the Fiber/Matrix Interfacial Strength of Carbon Fiber Reinforced Polyamide Model Composites(Interface,OS13 Micro- and meso-mechanics of composites,MICRO AND NANO MECHANICS)
Tanaka Kazuto; Hosoo Nanako; Katayama Tsutao
Abstracts of ATEM : International Conference on Advanced Technology in Experimental Mechanics : Asian Conference on Experimental Mechanics, 04 Oct. 2015, 04 Oct. 2015, 04 Oct. 2015, The Japan Society of Mechanical Engineers - マグネタイト／PLA 複合ナノファイバーに おけるマグネタイトの凝集・分散性に及ぼす マグネタイト表面処理の影響
本橋優人; 田中和人
日本材料学会第64回学術講演会, 24 May 2015, Oral presentation - 非接触ひずみ解析システムを用いた引張試験による豚角膜の異方性評価
水戸陽平; 田中和人; 片山傳生
日本材料学会 第64期通常総会・学術講演会, 24 May 2015, Oral presentation - エレクトロスピニング法により作製したCNT/PA6 ナノファイバーにおけるCNT の分散評価
向奥裕基; 田中和人
日本材料学会 第64期通常総会・学術講演会, 23 May 2015, Oral presentation - EVALUATION OF FIBER MATRIX INTERFACIAL STRENGTH FOR CNT GRAFTED CF/PA6 AT HIGH TEMPERATURE
Kazuto Tanaka; Genta Maeda; Yusuke Morita; Tsutao Katayama
20th International Conference on Composite Materials, Copenhagen, July 2015, 2015, 2015, 2015 - 高温環境下におけるCFRTPの引張試験方法の確立
祐名竜馬; 田中和人; 片山傳生
第6回自動車用途コンポジットシンポジウム, 21 Nov. 2014, Poster presentation - UDプリプレグシートを用いたCF/PCの成形とその衝撃特性評価
鈴江真弘; 篠原正浩; 片山傳生; 田中和人
第6回自動車用途コンポジットシンポジウム, 21 Nov. 2014, Poster presentation - FRTPの耐切創性評価
郡山隼人; 篠原正浩; 片山傳生; 田中和人
第6回自動車用途コンポジットシンポジウム, 21 Nov. 2014, Poster presentation - CFRTPの成形性に及ぼすNCFステッチテンションの影響
十倉大地; 岸本一成; 田中和人; 片山傳生; 榎 真一
第6回自動車用途コンポジットシンポジウム, 21 Nov. 2014, Poster presentation - 熱可塑性樹脂基複合材料のプレス射出ハイブリッド成形
藤田耀平; 片山傳生; 田中和人
第6回自動車用途コンポジットシンポジウム, 21 Nov. 2014, Poster presentation - CFRTPの直接通電抵抗加熱接合強度に及ぼすレーザー表面処理の影響
仲野由将; 田中和人; 片山傳生; 榎 真一
第6回自動車用途コンポジットシンポジウム, 21 Nov. 2014, Poster presentation - 炭素繊維/ポリアミド6樹脂界面強度に及ぼす単繊維引抜き試験片作製時における冷却速度の影響
小嶋啓介; 田中和人; 片山傳生; 篠原正浩
第6回自動車用途コンポジットシンポジウム, 21 Nov. 2014, Poster presentation - NCFを用いたCFRTP積層板の成形性評価
岸本一成; 田中和人; 片山傳生; 榎真一
成形加工シンポジア'13, 08 Nov. 2013, Oral presentation - IAA(65th フランクフルト・モーターショー)における複合材料
田中 和人
第5回自動車用途コンポジットシンポジウム, 26 Oct. 2013, Oral presentation - 炭素繊維/ナイロン6モデルコンポジットの繊維/樹脂界面特性に及ぼす温度と水環境の影響
小嶋啓介; 田中和人; 片山傳生; 篠原正浩
第5回自動車用途コンポジットシンポジウム, 26 Oct. 2013, Poster presentation - 直接通電抵抗加熱を用いたCFRTPパイプ成形における金型温度分布の有限要素解析
松浦康晴; 田中和人; 片山傳生; 榎真一
第5回自動車用途コンポジットシンポジウム, 26 Oct. 2013, Poster presentation - 連続炭素繊維強化ポリフェニレンサルファイドの機械的特性に及ぼす高温環境の影響
東浦将隆; 田中和人; 片山傳生
第5回自動車用途コンポジットシンポジウム, 26 Oct. 2013, Poster presentation - 炭素繊維への直接通電抵抗加熱を用いたCFRTPの溶着
仲野由将; 仲野由将; 田中和人; 片山傳生; 篠原正浩
第5回自動車用途コンポジットシンポジウム, 26 Oct. 2013, Poster presentation - 連続炭素繊維強化ポリオキサミド（CF/PX）の引張破壊特性に及ぼす水環境の影響
花崎俊樹; 田中和人; 片山傳生; 榎真一
第5回自動車用途コンポジットシンポジウム, 26 Oct. 2013, Poster presentation - UDシートを用いたCF/PC複合材料の曲げ破壊特性評価
一色哲志; 田中和人; 片山傳生; 篠原正浩
第5回自動車用途コンポジットシンポジウム, 26 Oct. 2013, Poster presentation - 連続繊維強化熱可塑樹脂積層板の機械的特性に及ぼす二次加工の影響
植田琢也; 田中和人; 片山傳生
第5回自動車用途コンポジットシンポジウム, 26 Oct. 2013, Poster presentation - 非接触変形解析システムを用いた曲げ試験中のひずみ測定手法の開発
瀬崎峻輔; 廣田篤史; 田中和人; 片山傳生
第5回自動車用途コンポジットシンポジウム, 26 Oct. 2013, Poster presentation - ガラス繊維強化易分解性ポリ乳酸複合材の曲げ特性評価
岡本洋子; 田中和人; 片山傳生; 吉川成志; 片山傳喜
第38回複合材料シンポジウム, 24 Sep. 2013, Poster presentation - 非接触ひずみ測定システムを用いた豚角膜の機械的特性評価
清吾宗永; 田中和人; 片山傳生
日本材料学会 第62期通常総会・学術講演会, 19 May 2013, Oral presentation - CNT複合PLAナノファイバーの創製とその機械的特性評価
名倉真史; 田中和人; 片山傳生
日本材料学会 第62期通常総会・学術講演会, 19 May 2013, Oral presentation - 連続繊維強化熱可塑樹脂を用いた短下肢装具の成形コスト評価
黄昭栄; 田中和人; 片山傳生
日本機械学会関西支部第88期定時総会講演会, 16 Mar. 2013, Oral presentation - 炭素繊維強化熱可塑樹脂UDプリプレグテープの樹脂含浸性に及ぼす製造条件の影響
岩室匡祐; 片山傳生; 田中和人; 榎真一
日本機械学会関西支部第88期定時総会講演会, 16 Mar. 2013, Oral presentation - 連続炭素繊維強化ポリオキサミド(CF/PX)の機械的特性に及ぼす水環境の影響
花崎 俊樹; 片山 傳生; 田中 和人; 倉鋪 憲
第4回自動車用途コンポジットシンポジウム, 01 Dec. 2012, Poster presentation - 無水マレイン酸変性PPサイジング剤を炭素繊維に塗布したCF/PPの界面特性評価
鈴木 裕史; 荒尾 与史彦; 田中 達也; 田中 和人; 片山 傳生
第4回自動車用途コンポジットシンポジウム, 01 Dec. 2012, Poster presentation - ダイヤフラム成形法を用いた繊維強化熱可塑性複合材料の成形性評価
小辻 孝文; 田中 和人; 片山 傳生
第4回自動車用途コンポジットシンポジウム, 01 Dec. 2012, Poster presentation - ロール成形法によるCFRTPの創製とその機械的特性評価
水野 翔太; 田中和人; 片山傳生
第4回自動車用途コンポジットシンポジウム, 01 Dec. 2012, Poster presentation - 直接通電抵抗加熱を用いたCFRTP溶着技術の開発
永倉 知; 田中 和人; 片山 傳生
第4回自動車用途コンポジットシンポジウム, 01 Dec. 2012, Poster presentation - 直接通電抵抗加熱を用いたCFRTPパイプ成形法における金型の温度分布評価
植田 貴昭; 田中 和人; 片山 傳生; 榎 真
第4回自動車用途コンポジットシンポジウム, 01 Dec. 2012, Poster presentation - 炭素繊維直接通電加熱成形法におけるポリカーボネート樹脂の含浸挙動
一色 哲志; 篠原 正浩; 片山 傳生; 田中 和人
第4回自動車用途コンポジットシンポジウム, 01 Dec. 2012, Poster presentation - 炭素繊維NCFの成形性に及ぼすしわ抑え力の影響
金沢 和弥; 榎 真一; 田中 和人; 片山 傳生
第4回自動車用途コンポジットシンポジウム, 01 Dec. 2012, Poster presentation - 直接通電加熱を用いたCFRTP成形法の開発
田中和人; 榎真一; 原田龍樹
第４回自動車用途コンポジットシンポジウム, 01 Dec. 2012, Poster presentation - 豚角膜の機械的特性評価
清吾宗永; 田中和人; 片山傳生; 倉鋪 憲
日本材料学会 第61期通常総会・学術講演会, 27 May 2012, Oral presentation
Industrial Property Rights
- Patent right
炭素繊維強化プラスチック
田中 和人, 片山 傳生
特願2014-238253, 特開2018-012741, 学校法人同志社 - Patent right
繊維強化樹脂成形品およびその製造方法
石川 健, 冨岡 正雄, 田中 和人, 片山 傳生
特願2015-209293, 特開2017-080930, 三菱レイヨン株式会社, 学校法人同志社 - Patent right
材料試験装置
田中 和人, 片山 傳生
特願2015-225936, 特開2016-105083, 学校法人同志社 - Patent right
樹脂成形装置及び樹脂成形方法
桑原 秀行, 片山 傳生, 田中 和人
公開日：2010年9月16日 出願日：2009年3月12日 出願番号：特願2009-060143 公開番号：WO2010/054046, 特願2011-503848, 特許第5696992号, 学校法人同志社, 桑原 秀行 - Patent right
パイプ成形装置及びパイプ成形方法
片山 傳生, 田中 和人, 桑原 秀行
特願2009-212843, 特開2011-062818, 桑原 秀行 - Patent right
樹脂成形装置及び樹脂成形方法
桑原 秀行, 片山 傳生, 田中 和人
JP2010054046, WO2010-104129, 学校法人同志社, 桑原 秀行 - Patent right
繊維強化熱可塑性複合材料の成形方法およびその中間体，および，複合シート
片山 傳生, 田中 和人, 宇野 和孝
特許第3947560号, 特願2006-535883, 特許第3947560号, 学校法人同志社, 丸紅インテックス株式会社 - Patent right
繊維強化熱可塑性複合材料の成形方法およびその中間体、および、複合シート
片山 傳生, 田中 和人, 宇野 和孝
JP2006314548, WO2007-013385, 学校法人同志社, 丸紅インテックス株式会社
Research Projects
- ナノカーボンを用いた樹脂含浸に優れたCFRTP成形法の開発とその機構解明
田中 和人; 森田 有亮; 片山 傅生
日本学術振興会, 科学研究費助成事業 基盤研究(B), 2019/04 -2023/03, 基盤研究(B), 同志社大学 - エレクトロスピニングによる骨再生用アパタイト被覆ポリ乳酸ナノファイバー足場の開発
片山 傅生; 森田 有亮; 田中 和人
生体内で早期にアパタイトで被覆されるポリ乳酸（PLLA）ファイバースキャホールドの開発を行った． アパタイト析出を誘起させるためりん酸水素カルシウム(DCPA)粒子を準備した．PLLAとPolyethylene oxide (PEO)を溶解させた1,3-dioxolaneにDCPA粒子を添加することでPLLA/DCPA溶液を調製した．PEOは相分離によりファイバーの多孔質化を促すために添加した．PLLA/DCPA溶液をエレクトロスピニング装置により紡糸し，多孔質PLLA/DCPAファイバースキャホールドを作製した．比較のため，DCPA粒子を添加しない多孔質PLLAファイバースキャホールドおよび中実PLLA/DCPAファイバースキャホールドを準備した．アパタイト析出を評価するため，スキャホールドを擬似体液（SBF）に37℃環境下で3日間浸漬した．浸漬後，SEMによるスキャホールド形態の観察を行った．また，EDS，FTIRおよびXRDによりスキャホールド表面および析出物の分析を行った． SEM観察により，SBF浸漬後にDCPA粒子を添加した多孔質および中実ファイバーの表面が析出物で覆われていることを確認した．DCPA粒子を添加しない多孔質ファイバー表面には析出物は観察されなかった．元素分析により析出物からCaとPが検出され，FTIRおよびXRD分析により析出物はアパタイトであることが確認された．中実ファイバーにおいてもDCPA粒子添加によってアパタイト形成が誘起されたが，部分的にクラックや剥離が観察された．ファイバー断面のSEM観察により，多孔質構造とした場合にはアパタイトがファイバー内部にまで析出していることが確認された．これらより，多孔質構造とすることでPLLA/DCPAファイバーが早期かつ均一にアパタイトで被覆されることが確認された．, 日本学術振興会, 科学研究費助成事業 基盤研究(C), 2017/04 -2020/03, 基盤研究(C), 同志社大学 - Development of in-situ high speed manufacturing process of carbon fiber reinforced thermoplastics with the help of carbon nanotube grafted carbon fiber
TANAKA KAZUTO
Carbon nanotube (CNT) grafting method at the growth temperature of relatively low (550-600 degree Celsius), at which tensile strength of carbon fiber was not degraded, was developed by using Ni as the catalyst and ethanol as the carbon source by catalytic chemical vapor deposition (CCVD) method. CNT grafted carbon fiber showed higher fiber/matrix interfacial share strength than as received carbon fiber. Molding method of Carbon Fiber Reinforced Thermoplastics with low void content was developed by using direct resistance heating to CNT grafted carbon fiber for a hot press molding., Japan Society for the Promotion of Science, Grants-in-Aid for Scientific Research Grant-in-Aid for Scientific Research (B), 2014/04 -2018/03, Grant-in-Aid for Scientific Research (B), Doshisha University - Development of PLLA porous nanofiber scaffold for tissue regeneration by using electrospinning method
Katayama Tsutao
In this study, PLLA porous hollow fiber scaffold was developed by using electrospinning to maintain nutrient supply in cultured cartilage. Porous hollow fiber scaffold was fabricated by using the co-axial spinneret. PLLA/PEO solution as the outer solution was prepared by dissolving poly-L-lactic acid (PLLA) and polyethylene oxide (PEO) in 1,3-dioxolane. 40% ethanol was used as the inner solution. According to SEM observation, the fabricated fiber had porous hollow structure. According to fluorescent observation of diffusion of fluorescent solution through the fiber, the developed PLLA porous hollow fiber scaffold had an interconnected structure to maintain supply of a culture medium in cultured cartilage., Japan Society for the Promotion of Science, Grants-in-Aid for Scientific Research Grant-in-Aid for Scientific Research (C), 2014/04 -2017/03, Grant-in-Aid for Scientific Research (C), Doshisha University - Development of Piezoelectric Scaffold using Lead-Free Piezoelectric Material MgSiO_3 for bone regeneration
KATAYAMA Tsutao; MORITA Yusuke; NAKAMACHI Eiji; TANAKA Kazuto
MgSiO_3 (MSO) thin film was fabricated by RF magnetron sputtering to develop new scaffold to accelerate bone formation. Single-layer, double-layer and triple-layer MSO thin film were fabricated on Cu/Ti/Si (100) substrate by RF magnetron sputtering. According to X-ray diffraction analysis, crystal growth along (111) orientation was confirmed for all MSO thin films. The surface potential was induced due to spontaneous polarization, and it decreased with increasing the number of layer. The culture system was developed to culture bone cells on the MSO thin film with 4-point cyclic bending deformation. Alternative sinusoidal waveform of the electric potential was observed for all MSO thin films, when pulsating cyclic bending deformation was applied to the MSO thin film by 4-point cyclic bending deformation. The peak value increased with the number of layer. These results showed that generated MSO (111) thin film can be used as coating material to enhance bone formation. In order to investigate the effects of cyclic surface potential of BaTiO_3 (BTO) induced with its deformation on osteogenic differentiation of osteoblast-like cells in vitro, osteoblast-like cells were cultured on BTO with or without compressive deformation. Polarized BTO and non-polarized BTO were prepared as specimen. Cyclic compressive load was applied to the BTO by a fatigue testing machine. The surface potential of polarized BTO due to spontaneous polarization was almost same as that of non-polarized BTO. Alternative sinusoidal waveform of the surface potential was observed on the BTO with frequency of deformation. ALP activity of osteoblast-like cells cultured on polarized BTO with compressive deformation was highest, whereas there were no significant differences in ALP activity of osteoblast-like cells cultured on polarized BTO and non-polarized BTO without compressive deformation. These results showed that the surface potential induced on piezoelectric material surface with deformation enhanced osteogenic differentiation., Japan Society for the Promotion of Science, Grants-in-Aid for Scientific Research Grant-in-Aid for Scientific Research (C), 2011 -2013, Grant-in-Aid for Scientific Research (C), Doshisha University - Development of welding method and heating element by using direct resistant heating for carbon fiber reinforced thermoplastics
TANAKA Kazuto
Carbon Fiber Reinforced Thermoplastics (CFRTP) is anticipated to be used for automotive parts due to their recyclability, ease of production and resistance to impact. Although composite materials have the advantage that the complex structure can be integrated when being molded, a lot of joints exist for automotive parts and welding techniques should be investigated. In this study, a new welding method using direct resistance heating of carbon fibers is developed., Japan Society for the Promotion of Science, Grants-in-Aid for Scientific Research Grant-in-Aid for Young Scientists (B), 2011 -2012, Grant-in-Aid for Young Scientists (B), Doshisha University - Establishment of evaluation methods for mechanical properties of thin bio materials to investigate amniotic membrane
TANAKA Kazuto
The amniotic membrane has attracted attention as a surgical biomaterial for regenerative medicine in various medical fields. Because the evaluation method for mechanical properties of thin bio materials are not standardized, however, its mechanical properties have not been revealed yet. In this study, evaluation methods for mechanical properties of thin bio materials have been established and the mechanical properties of amniotic membrane are investigated., Japan Society for the Promotion of Science, Grants-in-Aid for Scientific Research Grant-in-Aid for Young Scientists (B), 2009 -2010, Grant-in-Aid for Young Scientists (B), Doshisha University - Generation of Implantable Piezoelectric Thin Film for Hybrid Actuator and Enzyme Fuel Cell Battery
NAKAMACHI Eiji; TANAKA Kazuto
In this study, an implantable piezoelectric thin film by using a newly developed biocompatible material MgSiO_3 (MSO) for hybrid actuator and enzyme fuel cell battery was generated. We obtained below described results. (1) A multi layered MSO film was generated by RF magnetron sputtering apparatus. It has highly oriented crystal structure. (2) A monomorph type actuator for Bio-MEMS devices, which will be implanted in the human body, was fabricated. It was confirmed that this actuator could transport water and blood serum. (3) An enzyme cell battery by trapping the glucose was generated. But the power was not enough for operate the Bio-MEMS device. MSO cantilever type electric power generation system was successfully generated., Japan Society for the Promotion of Science, Grants-in-Aid for Scientific Research Grant-in-Aid for Scientific Research (B), 2008 -2010, Grant-in-Aid for Scientific Research (B), Doshisha University - Development of three-dimensional polylactic acid-piezoelectric material scaffold
KATAYAMA Tsutao; NAKAMACHI Eiji; TANAKA Kazuto; MORITA Yusuke
A cultivation system was designed to evaluate piezoelectric effects of the BaTiO_3 (BTO) ceramics on bone marrow cells, and rat bone marrow cells seeded on surfaces of the BTO ceramics were cultured in culture medium. ALP activity on the charged BTO surface was slightly higher than that on the non-charged BTO surface. The amount of calcium on the charged BTO surface was also higher than that on the non-charged BTO surface. These results showed that the electric charged BTO surface enhanced osteogenic differentiation., Japan Society for the Promotion of Science, Grants-in-Aid for Scientific Research Grant-in-Aid for Scientific Research (C), 2008 -2010, Grant-in-Aid for Scientific Research (C), Doshisha University - In-situ Fabrication of Single Nanofiber Tensile Test Specimens and Development of Evaluation Method of Their Mechanical Properties
TANAKA Kazuto
直径が微小であるナノファイバーは,相対的な表面積が広く,分子配列が期待できるなど,優れた特性を持つためさまざまな分野において注目されている.しかし,その微小さから,ハンドリングが困難であり,破壊荷重が微小であることから,その機械的特性の詳細は明らかになっていない.そこで本研究では,エレクトロスピニング法によりナノファイバーを紡糸する際に電位差を用いて,その場で引張り試験片を創製する方法を開発し,創製した繊維の機械的特性評価を行った., Japan Society for the Promotion of Science, Grants-in-Aid for Scientific Research Grant-in-Aid for Young Scientists (B), 2007 -2008, Grant-in-Aid for Young Scientists (B), Doshisha University - 人の動作の冗長性の映像解析によるオンライン抽出
水山 元; 牧 淳人; 水山 元; 田中 和人
今年度も,昨年度に引き続き,中華鍋操作の基本動作を一例にとりあげ,技能動作習得過程に関する基礎的な分析を進めた.まず,動作を,マーカの軌道や主成分得点の時系列推移によって特徴付けしたが,これでは,教師のアドバイスと非熟練者の習得過程との関連については十分な考察は困難であった.そこで,中華鍋操作の基本動作が周期的な動作であることに注目して,動作の基本周期,基本周波数の寄与率,標準偏差,位相差の四つの評価指標を用いて動作の詳細な特徴付けと考察を行った.この結果,習得過程におけるアドバイスの影響を示すことができ,習熟度によってアドバイス内容に差異があること,非熟練者によってアドバイスの解釈が異なること,などがわかった.また,非熟練者の状態変化を適切に把握するためには,外から観察するだけでは不十分であり,非熟練者と教師のやり取りなど,その状態に至るまでの経緯に対する理解が求められることが示された.教師は,アドバイスとそれによる動作の変化をみながら,非熟練者の状態に関する理解を深め,それに応じて,その都度アドバイスを追加・変更し,非熟練者の動作を矯正していく.このことは,アドバイス付きの技能動作の習得過程は,非熟練者が動作のコツを理解し,習得していく過程であるだけではなく,その非熟練者の状態を,教師がインタラクションを通じて把握していく過程でもあることを示している.したがって,技能動作習得過程の支援のためには,非熟練者の状態に関する理解を容易にするような,教師とのインタラクションの設計が一つのポイントとなる., 日本学術振興会, 科学研究費助成事業 萌芽研究, 2006 -2008, 萌芽研究, 京都大学 - 薄膜マイクロエレメントの曲げ試験方法の高精度化と信頼性確保
田中和人
(財)村田学術振興財団, 第22回(平成18年度)研究助成, 2006 -2008, Principal investigator, Competitive research funding - 生体用超高分子量ポリエチレンの疲労・破壊機構解明による信頼性確保
田中 和人
人工関節用超高分子量ポリエチレン(UHMWPE)において,フレーク状の磨耗紛を伴ったデラミネーション破壊が多数報告されている.デラミネーション破壊は,摺動表面下に生じる繰り返し応力によって,表面下で疲労き裂が進展し,層状のはく離が生じる現象であり,滅菌に用いられるγ線照射と,その後の酸化劣化反応によって助長されると考えられているが,その発生メカニズムについては明らかになっていない.また,酸化防止剤として知られているビタミンEを添加することによって,UHMWPEの酸化劣化を低減し,デラミネーション破壊を抑制しようとする試みもなされているが,その抑制機構は不明である.疲労摩耗現象は非常に複雑であるため,本研究では,疲労摩耗現象における損傷を微視的な材料の引張-引張疲労破壊現象ととらえ,UHMWPEの疲労き裂進展特性に及ぼす,γ線照射,酸化劣化やビタミンE添加の影響を検討し,これにより,人工関節用超高分子量ポリエチレンの信頼性を確保することを目的とした.フーリエ変換赤外吸収分光測定結果から,γ線照射を行った後酸化促進試験を行った試料では,表面が酸化していたのに対して,ビタミンE添加材では,酸化が抑制されていた.CT (Compact Tension)試験片を用いた疲労き裂進展試験の結果を,試験中の試験片の塑性変形による影響を除くため疲労J積分値ΔJを用いて整理した結果,処女材,ビタミンE添加材に比べ,γ線照射を行った後酸化促進試験を行った試料では,同じき裂進展速度に対してのΔJ値が低下していた.それに対して,ビタミンE添加材に対してγ線照射を行った後酸化促進試験を行った試料のき裂進展曲線は処女材,ビタミンE添加材とγ線照射を行った後酸化促進試験を行った試料の間に位置していたことからビタミンEを添加することによるΔJ値低下の軽減が見られた.つまり,ビタミンE添加は,超高分子量ポリエチレンのγ線照射と酸化劣化によるき裂進展抵抗の低下を抑制する働きがあることが,定量的に明らかになった., 日本学術振興会, 科学研究費助成事業 若手研究(B), 2005 -2006, 若手研究(B), 同志社大学 - Development of Mechanical and Fatigue Testing System for Micro Elements
MINOSHIMA Kohji; TANAKA Kazuto
In order to develop a reliable micro system in a service operation, much care must be taken into micro mechanical evaluation, i.e., mechanical properties of μm-sized microelements including fatigue behavior. However, the evaluation method has not yet been established. In this investigation, mechanical testing systems for microelements under tensile and bending loads have been developed, and thereby fatigue testing at 1-200 Hz is possible. Moreover, mechanical tests were conducted for SiN thin films of 1 μm and 3 μm thick, and the effects of sample size and loading mode were investigated : the tensile strength increased with a decrease in sample size. However, the elastic modulus was independent of sample size, although it is dependent on a deposition method. Bending strength is less dependent on the sample size compared with those under tensile loading. However, the bending strength was higher than the tensile strength, indicating that the strength of a microelement is highly dependent on the loading mode. Moreover, the influence of micro artificial defect and fatigue loading on an optical fiber was investigated. The tensile strength was extremely sensitive to an environment, and the tensile strength decreased by moisture containing even in a vacuum at 10^<-5> Pa : the strength decreased with an increase in a partial pressure of water molecule and with a decrease in loading rate under both monotonic and cyclic fatigue loading. The estimation method for evaluating the life under constant and cyclic fatigue loading was proposed. The method was based upon evaluating a crack growth law, derived by tensile tests and slow strain rate tensile testing, and the life evaluated by using the proposed method agreed with experimental data., Japan Society for the Promotion of Science, Grants-in-Aid for Scientific Research Grant-in-Aid for Scientific Research (B), 2004 -2006, Grant-in-Aid for Scientific Research (B), Osaka University - アクチュエータ内蔵マイクロエレメント特性評価試験片の開発と動的環境強度特性評価
田中 和人
マイクロマシンの実用化は,機械としての信頼性を確保した上ではじめて成り立つものである.とくに,近年では,Si単結晶ウエハなどを用いたバルクマシーニングに加え,ポリシリコン薄膜などの薄膜も構造材料として用いられるようになってきているが,これらの機械的特性あるいは疲労破壊特性については,標準的試験法すら確立されていない.マイクロエレメントの強度特性評価を行う場合に最も困難な点は,試験片のチャッキングである.圧子により荷重を負荷する曲げ試験は,試験片のチャッキングの問題を回避することができるため従来から多く適用されているが,応力勾配が存在すること,試験片と圧子の接触部で破壊することなどの問題がある.一方,微小な荷重を精度よく負荷できる試験機を用いた引張試験を用いて,静電チャックにより試験片を保持し,機械的特性評価も進められつつあるが,静電チャックでは,チャック部分のすべりが生じるため,疲労破壊特性評価には適さない.そこで,本研究では,ポリシリコン薄膜を対象として,接着剤によりチャッキングを行い,繰返し荷重下での疲労試験が可能なマイクロエレメント特性評価試験片を開発し,これを用いた引張試験によりポリシリコン薄膜の機械的特性評価を行った.さらに,乾燥空気中,実験室空気中,水中において疲労試験を実施し,ポリシリコン薄膜は,引張変動荷重下で水の影響を受けて破壊することを明らかにした.また,結晶粒径や結晶方位分布が,ポリシリコン薄膜のヤング率に及ぼす影響を,ボロノイ分割により作成した有限要素モデルを用いて検討した.それぞれの結晶粒に対してランダムに結晶方位を与えた場合は,解析領域内に含まれる粒子数が増加するにつれ,異方性による影響を受けにくくなり,平面ひずみモデルにおいてはヤング率は170GPaあたりに収束するのに対して,3次元モデルでは,ヤング率は160GPa程度になることを示した., 日本学術振興会, 科学研究費助成事業 若手研究(B), 2003 -2004, 若手研究(B), 京都大学 - Development of environment controlled micro mechanical testing system for thin films
MINOSHIMA Koji; TANI Shuichi; TANAKA Kazuto; KOMAI Kenjiro
In order to develop a reliable micro machine and MEMS in a service operation, much care must be taken into micro mechanical evaluation, i.e., mechanical properties of μm-sized microelements including fatigue behavior and effects of loading mode, e.g. tensile and bending loading. However, the evaluation method has not been well established yet. In this study, a bending testing system based on a Nano Indenter with knife-edge type indenter and a piezo stage were developed and the bending tests have been conducted for poly-Si thin microelements with 3.5μm thick, 5μm wide and 10μm long. Fracture stress obtained by the bending test was 3.9 ± 0.5GPa, which was higher than the strength under uni-axial tensile loading. To evaluate the effect of loading mode on the mechanical properties of a thin microelement, the uni-axial tensile testing system has also been developed. The system consists of a micromechanical tensile testing machine actuated by a PZT driven positioning stage, a micro manipulation system, a non-contact strain measurement system with a help of a double field of view microscope. By using this testing system, tension-tension fatigue tests for poly-Si thin microelements with 3.5μm thick and 10μm wide can be carried out up to 10 Hz of stress cycle frequency in various environments ; in wet environment, in dry air and in laboratory air. Moreover to evaluate the influence of the crystalline orientation, the number of grains and the grain size distribution on the elastic modulus of poly-Si thin film, finite element models were developed based on the Monte Carlo method. The analytical results were compared with the experimental ones., Japan Society for the Promotion of Science, Grants-in-Aid for Scientific Research Grant-in-Aid for Scientific Research (B), 2002 -2003, Grant-in-Aid for Scientific Research (B), KYOTO UNIVERSITY - Investigation into the Degradation Mechanisms of Advanced Metallic Materials based upon Localized Hydrogen Distribution Analyses
KOMAI Kenjiro; TANAKA Kazuto; MINOSHIMA Kohji
Advanced metallic materials are sensitive to an environment and in order to clarify the degradation mechanisms and to improve the toughness of the metallic materials in a service environment, we must clarify the process of hydrogen entry as well as the hydrogen trap sites in the material. In this research project, a method to analyze the localized hydrogen distribution has been developed: the method is based upon a silver decoration technique. The investigation yields the following conclusions, i) An amount of silver precipitated on a sample is increased with an increase in a hydrogen content of the test sample, ii) The sensitivity of the method is increased with a decrease in the pH value of the decoration solution, iii) A small particle of silver on the sample surface can be analyzed by a kind of a Kelvin force microscope. iV) The sensitivity of the method is extremely improved by coating a kind of metallic thin film on the sample surface. The important thing is the correlation between the hydrogen content and the amount of the precipitated silver on the sample surface. For this purpose, the hydrogen was charged from the one side of the sample, and the hydrogen which passed through the sample was detected on the other side of the sample. This shows a good agreement between the permeated hydrogen current or the hydrogen content of the sample and the amount of precipitated silver on the sample surface. This means that the developed method is useful to analyze the hydrogen distribution in a quantitative manner. The investigation also includes the evaluation of the environmental strength of a high-strength steel: the crack growth rate is increased under a cathodically charged condition, and the fracture surface became transgranular. The analyses of the localized hydrogen distribution as well as the thermal desorption behavior of hydrogen show that the charged hydrogen is mainly absorbed within a grain, and this agrees with the fracture surface morphology. Moreover, in situ AFM analyses of a growing stress corrosion crack show that the growth behavior is dependent on the localized hydrogen distribution, and this caused an acceleration and retardation of a stress corrosion crack growth., Japan Society for the Promotion of Science, Grants-in-Aid for Scientific Research Grant-in-Aid for Scientific Research (B), 2001 -2002, Grant-in-Aid for Scientific Research (B), KYOTO UNIVERSITY - Development of testing system for evaluating the mechanical properties of thin microelement
KOMAI Kenjiro; TANI Shuichi; TANAKA Kazuto; MINOSHIMA Kohji; TSUGAI Masahiro
In order to develop a reliable micro machine and MEMS in a service operation, much care must be taken into micro mechanical evaluation, i.e., mechanical properties of μm-sized microelements including fatigue behavior. However, the evaluation method has not been well established yet. In this study, the testing system of a thin microelement has been developed to evaluate the mechanical properties; the tensile strength, elastic modulus, fatigue strength and so on, and the evaluation methods for thin microelement are established. The system consists of a micromechanical tensile testing machine actuated by a PZT driven positioning stage, a micro manipulation system, a non-contact strain measurement system with a help of a double field of view microscope. The system is basically designed for poly-Si thin microelement with 3.5μm thick and 10μm wide. When conducting the uni-axial tensile test, the most important and difficult thing is to establish the method of gripping the specimen. In this study, a gripping method with glue is developed and successfully applied to the uni-axial tensile test without any slipping at the grip. Moreover the testing system is installed on an AFM stage and in situ observation of specimen surface is successfully done. The testing machine and a control program are improved to conduct the fatigue tests of thin microelement not only in laboratory air but also in water., Japan Society for the Promotion of Science, Grants-in-Aid for Scientific Research Grant-in-Aid for Scientific Research (B), 2001 -2002, Grant-in-Aid for Scientific Research (B), KYOTO UNIVERSITY - 繊維/樹脂界面の動的環境強度特性評価と界面はく離疲労き裂進展のその場観察
田中 和人
複合材料は「組合せ」であるが故に数多くの特徴を有し,単一素材では実現できない特性の可能性に富んでいる一方,必然的に異種材料間に界面が存在し,その特性が複合材料の機械的特性に大きな影響を与える.しかしながら,繊維/樹脂界面の機械的特性や破壊機構,特に実使用下において重要となる動的環境強度特性に関する知識は,高強度・高弾性繊維強化複合材料の研究・開発の歴史が浅いこともあり,極めて乏しい状況にある.そこで,本研究においては,アラミド繊維とエポキシ樹脂を用いて,界面き裂を定量的に観察することができるモデルコンポジット試験片を考案し,乾燥空気中,実験室空気中,湿潤環境中において単繊維引き抜き試験を疲労荷重下で行い,界面はく離進展挙動に及ぼす水環境や繰り返し速度の影響を検討した.初期き裂の大きさは吸水時間に依存し,4週間吸水材は空中放置材に比べて大きな初期き裂が発生し,7週間吸水材の場合は埋め込み長さ全長にわたる初期き裂が生じた.初期き裂導入後のき裂進展については,界面き裂進展速度は界面き裂の進展にともなって低下し,最終的に停留した.界面き裂の停留は,最大荷重を界面き裂の表面積で除した値が,環境に固有な一定値に近づくことで条件付けられた.界面き裂は,乾燥空気中では実験室空気中に比べて高速に進展するのに対して,湿潤空気中ではほとんど進展しなかった.また,湿潤空気中でき裂進展試験を開始し,界面き裂が停留した後に乾燥空気を導入すると,き裂はふたたび進展を開始した.逆に,乾燥空気中で試験を開始し,界面き裂進展中に湿潤空気を導入すると,界面き裂は停留した.つまり,湿潤環境により,き裂進展速度が低下することがわかる.また,界面き裂進展速度は応力繰り返し速度に大きく影響を受け,繰り返し速度が低いときに速くなった., 日本学術振興会, 科学研究費助成事業 若手研究(B), 2001 -2002, 若手研究(B), 京都大学 - Strength Evaluation of Single Crystal Silicon Microelements and Related Micromaterials
MINOSHIMA Kohji; KAMEI Ryuichiro; TANAKA Kazuto; KOMAI Kenjiro
In order to develop a reliable micromachine in a service operation, much care must be taken to micro mechanical evaluation, i.e., mechanical properties of μm-sized microelements. However, the evaluation method has not been well established. In this research project, the fracture behavior is investigated in the micromaterials for the micromachines and micro-electro mechanical system, including single crystal silicon. This will help us establish design criteria and life assessment methods for micromachines. The materials investigated were single-crystal silicon, poly-silicon film, and high-purity vitreous silica fiber. In this investigation, micro-mechanical testing machine is newly developed, and tensile testing of micro samples is thereby possible. The tensile strength of the poly-silicon films is about 0.9 GPa for the width of 10 μm, whereas the strength of the microsample with 5 μm is about 3.7 GPa, which are very strong compared with the structural materials for the ordinary sized machines and structures. Single-crystal silicon is immune to fatigue fracture and stress corrosion in laboratory air. However, the fracture behavior is sensitive to the water environment, and the synergistic effects of water environment and the dynamic stress caused a decrease in strength. Nanoscopic observation of the crack initiation site shows that the nanometric crack is formed on the surface owing to water and the dynamic loading, and the crack nucleation mechanisms are discussed. On the other hand, the influence of water environments on the fracture behavior is investigated in a high-purity vitreous silica fiber. Silica fiber is reported to be sensitive to water, and the static strength is decreases when the tests are conducted in water. However, when the impurity elements are decreased, the static strength is not influenced by water environment, indicating that the resistance to water environment is increased by a decrease in the impurity element in the vitreous silica fiber., Japan Society for the Promotion of Science, Grants-in-Aid for Scientific Research Grant-in-Aid for Scientific Research (B), 2000 -2001, Grant-in-Aid for Scientific Research (B), KYOTO UNIVERSITY - Development of in situ manufacturing and mechanical evaluation system for micromaterials
KOMAI Kenjiro; SENDAI Tomoko; TANAKA Kazuto; MINOSHIMA Kohji
In order to develop a reliable micromachine in a service operation, much care must be taken to micro mechanical evaluation, i.e., mechanical properties of μm-sized microelements including fatigue behavior. However, the evaluation method has not been well established yet. In this study, the evaluation system of metallic foil is developed, including in situ specimen machining, chucking and non-contact strain measurement. Using an electric discharge machine (PX-05 : Mitsubishi Co.Ltd.), micro specimens of stainless steel foil were machined and a suitable machining condition was found to minimize the roughness of machined surface : the minimum of the maximum roughness was 1.0μm. The micro specimen for tensile testing was designed to make easily handle and testing, which has the specimen supporting part and the specimen chucking part. To measure the strain of microelements, for which strain gages on the market are too large and strong, a laser speckle strain measurement method was applied, and non-contact strain measurement system for microelements was developed. Integrating these machining system and non-contact strain measurement system, tensile and fatigue tests of micro specimens of stainless steel foil (thickness : 50 μm, width : 1 mm) was successfully conducted, and the influence of anisotropy and machining method on the mechanical and fatigue strength was investigated. The elongation at break and fracture morphology of tensile tests were affected by specimen orientation, but fatigue strength was not., Japan Society for the Promotion of Science, Grants-in-Aid for Scientific Research Grant-in-Aid for Scientific Research (A)., 1999 -2000, Grant-in-Aid for Scientific Research (A)., KYOTO UNIVERSITY - Environmental Strength Evaluation and Investigation into Degradation Mechanisms of Advanced Metallic Materials based upon Analyses of State of Hydrogen and Nanofractography
KOMAI Kenjiro; TANAKA Kazuto; MINOSHIMA Kohji
Advanced metallic materials are sensitive to an environment and in order to clarify the degradation mechanisms and to improve the toughness of these metallic materials in a service environment, we must clarify the process of hydrogen entry as well as the hydrogen trap sites in the material. In this research project, thermal desorption spectroscopy of hydrogens is applied to analyze the state of hydrogen in the material, or hydrogen trap sites, and correlate the responsible hydrogen in the material to hydrogen embrittlement : the materials investigated are titanium aluminides intermetallic compound and Ti-6Al-4V alloys, and the influence of environment on fatigue crack growth behavior was investigated. In the case of titanium aluminides, the tensile strength of the duplex material decreases in order of a water molecule content in an environment : the strength in vacuum is the highest, and decreases in order of laboratory air and water. In the case of the lamellar material, the fatigue crack growth rate in dry air is higher in the R-C crack plane orientation than that in L-C crack plane orientation : the crack growth rate becomes higher when the crack grows as the lamellae are tearing off. However, in the case of the duplex material, the crack growth rate in the R-C crack plane orientation is smaller in low ΔK (ΔK_) region. When the cathodic charging is applied, the fatigue crack growth rate becomes higher than that in dry air, in particular at higher stress intensity factor range. The hydrogen evolution rate is increased by cathodic charging, with lower temperature peaks and higher ones. The peaks at lower temperatures are correlated with hydrides decomposition and detrapping of hydrogen from microstructural imperfections such as microvoids. As received materials also shows a evolution peak at a higher temperature, and the evolution rate is almost independent of cathodic charging. In addition, the evolution rate at a higher temperature above 800℃ is increased by cathodic charging. These hydrogens are considered to have an important role on fatigue crack growth acceleration. In contrast with these, the crack growth rate of Ti-6Al-4V alloy is sensitive to environment when the crack plane orientation is T-L, whereas the crack growth rate in a solution is almost equal to that conducted in dry air. However, the crack path changes towards the longitudinal direction, when the applied stress intensity factor range exceeds a certain value. The hydrogen evolution kinetics are independent of the testing environment, or the acceleration of crack growth, and the mechanisms of the crack acceleration are discussed., Japan Society for the Promotion of Science, Grants-in-Aid for Scientific Research Grant-in-Aid for Scientific Research (B)., 1999 -2000, Grant-in-Aid for Scientific Research (B)., KYOTO UNIVERSITY - 高じん性繊維強化複合材料の衝撃破壊特性に及ぼす環境効果
田中和人
河上記念財団, 第42回工学研究助成, 1999 -2000, Principal investigator, Competitive research funding - Development of Genetic Algorithms based System for High-Precision Reconstructions of Three-Dimensional Topographies using Stereo Fractographs
MINOSHIMA Kohji; TANAKA Kazuto; KOMAI Kenjiro
A software is developed which enables reconstruction of the three-dimensional (3-D) shape of fracture surfaces without human assistance. It is based upon computer image processing and pattern recognition techniques by using a stereo-pair of scanning electron micrographs. The processing consists of two subprocesses : searching the matching points between two images and computation of heights using the relative shift of the matching points. By using the previously developed system, some mismatches were inevitable in the search process, in particular, for low-contrast SEM images such as striations, intergranular facets, and so on. In order to improve the accuracy of the search, a Genetic Algorithm (GA) was implemented into the developed system. By using the GA method, the 3-D shapes of a wide variety of fracture surfaces including cleavage failures, intergranular cracking, dimples and fatigue striations, were successfully reconstructed with sufficient accuracy. The searching processes by the GA method and the previously developed two-step algorithm of coarse and close searching were compared. These proved that the GA method has the advantage of accuracy in the searching process and of short-run-time. A detailed 3-D shape, or more than a 120×120 reconstructed point-sized shape, was thus obtained with sufficient accuracy and with a relatively short-run-time. The developed system was also applied to the fatigued fracture surfaces of a stainless steel (SUS316NG) and a low-alloy steel (SGV420), and the relationship between quantitative topographic measures and stress intensity factors and/or crack growth rates was discussed., Japan Society for the Promotion of Science, Grants-in-Aid for Scientific Research Grant-in-Aid for Scientific Research (B), 1998 -1999, Grant-in-Aid for Scientific Research (B), KYOTO UNIVERSITY - 高じん性繊維強化複合材料の衝撃破壊特性と複合環境効果
田中 和人
日本学術振興会, 科学研究費助成事業 特別研究員奨励費, 1998 -1998, 特別研究員奨励費, 京都大学
Teaching Experience
Research Seeds
- Development of Electrospinning Method for Single Nanofibers and Evaluation of Their Mechanical PropertiesResearch Fields: Machinery and Measuring Equipment, Life SciencesAffiliation/Name: Kazuto Tanaka:Tsutao Katayama
- Development of High Speed Compression Moulding and Welding of FRTP by using High-frequency Direct Resistance HeatingResearch Fields: Machinery and Measuring EquipmentAffiliation/Name: Kazuto Tanaka:Tsutao Katayama
Patent Information: 特願 2006-535883, 特願 2011-503848（外国出願有:アメリカ:ヨーロッパ:韓国） - Development of Evaluation of Mechanical Properties for Thin BiomaterialsResearch Fields: Machinery and Measuring Equipment, Life SciencesAffiliation/Name: Kazuto Tanaka:Tsutao Katayama
- Development of Bio-degradable Composite MaterialsResearch Fields: Chemicals, Nanotechnology and Materials, Machinery and Measuring Equipment, Environment and EnergyAffiliation/Name: Kazuto Tanaka:Tsutao Katayama
- Development of Diaphragm Forming Process of Continues Fiber Reinforced ThermoplasticsResearch Fields: Machinery and Measuring EquipmentAffiliation/Name: Kazuto Tanaka:Tsutao Katayama
